1. CSC1202-2013 (c) Nouf AlJaffan Network Topologies

2. Objectives CSC1202-2013 (c) Nouf AlJaffan Describe the basic and hybrid LAN physical topologies, and their uses, advantages and disadvantages. Describe the backbone structures that form the foundation for most LANs

3. Simple Physical Topologies CSC1202-2013 (c) Nouf AlJaffan Physical topology: physical layout of nodes on a network Four fundamental shapes: Bus Ring Star Mesh May create hybrid topologies Topology integral to type of network, cabling infrastructure, and transmission media used

4. Why we need a topology CSC1202-2013 (c) Nouf AlJaffan Choosing one topology over another can impact : type of equipment the network needs capabilities of the equipment network’s growth way a network is managed

5. Bus CSC1202-2013 (c) Nouf AlJaffan

6. Simple Physical Topologies CSC1202-2013 (c) Nouf AlJaffan A Bus topology consists of a single cable—called a backbone — connecting all nodes on a network without intervening connectivity devices

7. Bus (continued) CSC1202-2013 (c) Nouf AlJaffan Devices share responsibility for getting data from one point to another Terminators stop signals after reaching end of wire Prevent signal bounce Inexpensive, not very scalable Difficult to troubleshoot, not fault-tolerant

8. Bus AdvantagesDisadvantage CSC1202-2013 (c) Nouf AlJaffan Works well for small networks Easy to install Relatively inexpensive to implement Management costs can be high Network disruption when computers are added or removed A break in the cable will prevent all systems from accessing the network. Difficult to troubleshoot

9. Ring CSC1202-2013 (c) Nouf AlJaffan

10. Simple Physical Topologies CSC1202-2013 (c) Nouf AlJaffan Ring topology Each node is connected to the two nearest nodes so the entire network forms a circle One method for passing data on ring networks is token passing Data travels around the network Traffic flows in one direction Slow performance One workstation goes down; whole network goes down Network is highly dependent

11. Ring AdvantagesDisadvantage CSC1202-2013 (c) Nouf AlJaffan Cable faults are easily located, making troubleshooting easier Ring networks are moderately easy to install Expensive Requires more cable and network equipment at the start Expansion to the network can cause network disruption A single break in the cable can disrupt the entire network

12. Star CSC1202-2013 (c) Nouf AlJaffan

13. Simple Physical Topologies CSC1202-2013 (c) Nouf AlJaffan Star topology Every node on the network is connected through a central device called hub or switch.

14. Star (continued) CSC1202-2013 (c) Nouf AlJaffan Any single cable connects only two devices Cabling problems affect two nodes at most Requires more cabling than ring or bus networks More fault-tolerant Easily moved, isolated, or interconnected with other networks Scalable Supports max of 1024 addressable nodes on logical network

15. Star AdvantagesDisadvantage CSC1202-2013 (c) Nouf AlJaffan Good option for modern networks Low startup costs Easy to manage Offers opportunities for expansion Most popular topology in use; wide variety of equipment available Hub is a single point of failure Requires more cable than the bus

16. Mesh CSC1202-2013 (c) Nouf AlJaffan

17. Simple Physical Topologies CSC1202-2013 (c) Nouf AlJaffan Mesh Topology: Each computer connects to every other. High level of redundancy. Rarely used. Wiring is very complicated Cabling cost is high Troubleshooting a failed cable is tricky A variation hybrid mesh – create point to point connection between specific network devices, often seen in WAN implementation.

18. Mesh AdvantagesDisadvantage CSC1202-2013 (c) Nouf AlJaffan Robust There is the advantage of privacy or security The network can be expanded without disruption to current uses Point to point links make fault identification and fault isolation easy Requires more cable than the other LAN topologies Complicated implementation Installation and reconnection are difficult. Sheer bulk of wiring can be greater than the available space can accommodate Expensive

19. Hybrid Physical Topologies CSC1202-2013 (c) Nouf AlJaffan One example of Hybrid Topology is Tree topology Tree topology is a combination of Bus and Star topology. It consists of groups of star-configured workstations connected to a linear bus backbone cable. If the backbone line breaks, the entire segment goes down An example of this network could be cable TV technology

20. Choosing a Topology CSC1202-2013 (c) Nouf AlJaffan BUS network is small network will not be frequently reconfigured least expensive solution is required network is not expected to grow much STAR it must be easy to add/remove PCs it must be easy to troubleshoot network is large network is expected to grow in the future RING network must operate reasonably under heavy load higher speed network is required network will not be frequently reconfigured