Presentation is loading. Please wait.

Presentation is loading. Please wait.

PXIE RFQ Engineering Design Steve Virostek Engineering Division Lawrence Berkeley National Laboratory April 10, 2012 Project X Collaboration

Published byJeremy McKenzie Modified over 8 years ago

Similar presentations

Presentation on theme: "PXIE RFQ Engineering Design Steve Virostek Engineering Division Lawrence Berkeley National Laboratory April 10, 2012 Project X Collaboration"— Presentation transcript:

1 PXIE RFQ Engineering Design Steve Virostek Engineering Division Lawrence Berkeley National Laboratory April 10, 2012 Project X Collaboration Meeting @ LBNL

2 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 Topics LBNL RFQ experience PXIE RFQ design approach PXIE RFQ design details Thermal, RF and mechanical analyses Current progress Upcoming tasks

3 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 LBNL RFQ Experience LBNL has developed approximately eight different RFQ designs over the past 30 years Five different brazed or bolt-together RFQ’s fabricated by LBNL The SNS RFQ design team (physicist, engineer, mechanical designer) currently working on the PXIE RFQ project LBNL is also designing an RFQ nearly identical to PXIE for the Institute of Modern Physics (IMP) in Lanzhou, China RFQ4 (bolt-together design) SNS (RFQ5 – brazed structure)

4 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 PXIE RFQ Design Approach Develop the PXIE design based on past LBNL RFQ experience Use proven, low risk techniques from the SNS RFQ design –Four vane copper-to-copper braze –Fly cut modulated vane tips –Brazed, water cooled pi-mode rods –Low profile, bolted module joints –Removable fixed slug tuners

5 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 Design Approach (continued) Eliminate high risk, high cost features from the SNS RFQ –Gun drilled cooling passages instead of cut-and-cover approach saves a high risk brazing step –No Glidcop outer shell eliminates the expense of the material and the Au-Cu foil braze –O-rings and RF spring seals instead of tin gaskets for the tuners eliminates the large sealing forces

6 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 PXIE RFQ Design Features All OFHC copper body machined from solid billets 4-vane cavity structure with fly cut modulated vane tips Four ~1.12 m long cavity modules with bolted joints 162.5 MHz frequency Total length: 4.46 m Pi-mode rods for mode stabilization Distributed fixed slug tuners CAD model of assembled 4-module PXIE RFQ design concept

7 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 PXIE RFQ Module Design Features Each module consists of four separately machined vanes Precision ground mating surfaces High reliability copper-to-copper braze forms cavity module 20 fixed slug tuners/module 8 pi-mode stabilizing rods per module 12 field sensing loops per module RF power feed through two loop couplers

8 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 PXIE RFQ Module Design Features Gun drilled vane and outer wall cooling passages Two vacuum pumping ports per module Separate wall and vane cooling circuits provides active tuning capability Sealing provided by RF and O-ring seals at bolted joints Design details will be presented in design review later this week

9 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 Pi-mode Rods and Tuners Water cooled Pi-mode rods Fixed slug tuners

10 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 RFQ Cooling Passages Cooling passages are gun drilled into each vane Modules 1 & 4 Modules 2 & 3 Approximately 12mm diameter Corner passages

11 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 Cooling Passage Distribution 4 inner channels 8 outer channels

12 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 RFQ Vane Details Vanes are completely machined along their length before oven brazing Electron Beam weld cooling passage plugs before machining, both ends Vane end details machined after brazing, both ends Pre-braze machining includes: ‐Modulations ‐Ports and holes ‐Braze wire grooves ‐Radial matcher ‐Vane cut back ‐Grinding

13 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 Precision Assembly Procedure Vertical vanes weigh 150 kg each Horizontal vanes weigh 200 kg each Vertical vanes weigh 150 kg each Horizontal vanes weigh 200 kg each A special fixture is being designed for this pre-braze assembly step SNS RFQ

14 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 Vane Braze Preparation Braze wire installation Every groove filled Every braze wire staked (secured) No high spots above braze surfaces Braze wire

15 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 Fabrication Tests Vane cutting tool test Full length vane fabrication test Vane braze test

16 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 PXIE RFQ Mechanical Analyses Numerous engineering analyses carried for design validation Cavity body and vane cutback thermo-mechanical analyses using an ANSYS RF/thermal/structural model Stress analysis using converted ANSYS thermal model Water temperature tuning analysis using a separate ANSYS model Calculation of area properties for body stiffness analysis Sub-model of the cutback region (RF, thermal, displacement)

17 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 Current Progress  RFQ engineering design nearly complete - finalize with input from upcoming design review Accurate 3D CAD model of 4-module RFQ is complete Model includes: vanes w/gun drilled passages, pi-mode rods, tuner ports, vacuum ports, sensing loop ports, RF drive ports Model contains detail necessary to generate fab drawings  Preliminary design of RFQ related subsystems is complete RFQ cooling scheme (body, cutbacks, pi-mode rods) RFQ vacuum system configuration (analysis TBD)  Fabrication tests designed and under way  Thermal, RF and mechanical analyses are nearly complete

18 S. Virostek: PXIE RFQ Engineering Design Project X Collaboration Meeting, Berkeley, CA April 10, 2012 Additional Engineering Tasks  Carry out fabrication tests (at LBNL and IMP-Lanzhou) Write engineering notes describing the test procedures Procure all necessary material  Perform additional analyses Vacuum system analysis Tuner RF/heating analysis Final RFQ support points – stress and deflection analysis  Complete final version of the RFQ 3D CAD model (close)  Generate complete set of multi-step fabrication drawings  Write a detailed engineering notes to document the final RFQ design and the results of the analyses

Download ppt "PXIE RFQ Engineering Design Steve Virostek Engineering Division Lawrence Berkeley National Laboratory April 10, 2012 Project X Collaboration"

Similar presentations

MICE RF Cavities and RFCC Module Update Derun Li Lawrence Berkeley National Laboratory MICE RF Workshop Daresbury Laboratory, UK April 17, 2012 April 17,

MICE RF Cavities and RFCC Module Update Derun Li Lawrence Berkeley National Laboratory MICE RF Workshop Daresbury Laboratory, UK April 17, 2012 April 17,
RF Cavity Module G. Gosling Dept. of Mechanical Engineering Imperial College London.

RF Cavity Module G. Gosling Dept. of Mechanical Engineering Imperial College London.
MICE RF and Coupling Coil Module Outstanding Issues Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 26, 2004.

MICE RF and Coupling Coil Module Outstanding Issues Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 26, 2004.
MICE RF Cavity Design and Fabrication Update Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 27, 2004.

MICE RF Cavity Design and Fabrication Update Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 27, 2004.
Modifications Required on Model Before Meshing & Solving Slice up to define mesh in different areas –Transversely separate vane-tip region (about 16x16mm.

Modifications Required on Model Before Meshing & Solving Slice up to define mesh in different areas –Transversely separate vane-tip region (about 16x16mm.
Plans for 201-MHz Cavities Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory November 18, 2010.

Plans for 201-MHz Cavities Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory November 18, 2010.
RF Measurement Plan Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory January 20, 2011 MICE Video Conference Meeting.

RF Measurement Plan Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory January 20, 2011 MICE Video Conference Meeting.
Integration of Cavities and Coupling Coil Modules Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting March 28 – April 1, 2004.

Integration of Cavities and Coupling Coil Modules Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting March 28 – April 1, 2004.
Trip Report on the visit to ICST of HIT, Harbin, China Derun Li Mike Green Steve Virostek Mike Zisman Lawrence Berkeley National Laboratory (from December.

Trip Report on the visit to ICST of HIT, Harbin, China Derun Li Mike Green Steve Virostek Mike Zisman Lawrence Berkeley National Laboratory (from December.
MICE RF Cavity Measurements Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory March 26, 2010 University of California, Riverside,

MICE RF Cavity Measurements Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory March 26, 2010 University of California, Riverside,
MICE RF and Coupling Coil Module Integration Issues Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 27, 2004.

MICE RF and Coupling Coil Module Integration Issues Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 27, 2004.
Status of the 201 MHz Cavity and Coupling Coil Module Steve Virostek Lawrence Berkeley National Laboratory MICE Video Conference March 10, 2004.

Status of the 201 MHz Cavity and Coupling Coil Module Steve Virostek Lawrence Berkeley National Laboratory MICE Video Conference March 10, 2004.
Installation Issues Steve Virostek Lawrence Berkeley National Lab MICE CM23 at ICST, Harbin January 13, 2009.

Installation Issues Steve Virostek Lawrence Berkeley National Lab MICE CM23 at ICST, Harbin January 13, 2009.
Module Vessel Connection Concept Steve Virostek Lawrence Berkeley National Laboratory AFC Module Meeting April 23, 2004.

Module Vessel Connection Concept Steve Virostek Lawrence Berkeley National Laboratory AFC Module Meeting April 23, 2004.
Status of 201 MHz Prototype Cavity and Curved Be Windows Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory MICE Collaboration Meeting.

Status of 201 MHz Prototype Cavity and Curved Be Windows Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory MICE Collaboration Meeting.
Progress on the MICE 201 MHz Cavity Design Steve Virostek Lawrence Berkeley National Lab RF Working Group Fermilab August 22, 2007  automatic.

Progress on the MICE 201 MHz Cavity Design Steve Virostek Lawrence Berkeley National Lab RF Working Group Fermilab August 22, 2007  automatic.
Update on Be Wall Cavity Steve Virostek Lawrence Berkeley National Lab MTA RF Workshop November 15, 2010.

Update on Be Wall Cavity Steve Virostek Lawrence Berkeley National Lab MTA RF Workshop November 15, 2010.
201 MHz NC RF Cavity R&D Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory WG3 at NuFact 2004 July 28, 2004.

201 MHz NC RF Cavity R&D Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory WG3 at NuFact 2004 July 28, 2004.
MICE RFCC Module Update Allan DeMello Lawrence Berkeley National Lab MICE CM26 at Riverside California March 26, 2010.

MICE RFCC Module Update Allan DeMello Lawrence Berkeley National Lab MICE CM26 at Riverside California March 26, 2010.
Status of 201 MHz Prototype and RFCC Module Derun Li, S. Virostek, M. Zisman Center for Beam Physics Lawrence Berkeley National Laboratory In collaboration.

Status of 201 MHz Prototype and RFCC Module Derun Li, S. Virostek, M. Zisman Center for Beam Physics Lawrence Berkeley National Laboratory In collaboration.

Similar presentations

Ads by Google