1. PREFERRED UTILITIES MFG CORP 31-35 South St. Danbury CT T: (203) 743-6741 F: (203) 798-7313 www. PREFERRED-MFG.com

2. “A low-cost upgrade for obsolete CB-Hawk systems” Preferred Instruments CB-Hawk Replacement System Based on BurnerMate TS Technology www.preferred-mfg.com

3. Known as Honeywell BC-7700 and Cleaver-Brooks Hawk systems, thousands of units have been installed since the early 90’s. Honeywell abruptly stopped manufacturing system components and spare parts over a year ago. The History.

4. The Problem  CB has literally thousands of systems installed with very limited repair parts--many already gone.  CB’s answer is a very expensive PLC-based upgrade costing $17K-$40K plus installation.  Alternatively, C-B will convert the Hawk system to an RM-7800 for $7,000 (and lose all the functions of the Hawk system)

5. Preferred’s Solution Introduced in 2005, the BurnerMate TS consists of:  A programmable DCS  A Honeywell flame relay  A touch-screen HMI.

6. Preferred’s Solution Preferred has configured a BurnerMate TS system to be a wire-for-wire replacement for the CB Hawk system.  Replace Hawk sub-panel with Preferred sub-panel.  Replace gas & oil pressure sensors with pressure switches. Installation is as simple as…

7. Preferred’s Solution Preferred has configured a BurnerMate TS system to be a wire-for-wire replacement for the CB Hawk system.  Replace steam pressure sensor with a pressure transmitter. (or temp. transmitter for hot water boilers)  Replace mod motor with Preferred SM-15 servo actuator

8. Preferred’s Solution Preferred has configured a BurnerMate TS system to be a wire-for-wire replacement for the CB Hawk system.  Remove CB Hawk keypad.  Install the Preferred touch- screen display. Blockware is pre-programmed. Commissioning is as easy as filling- in-the-blanks.

9. Preferred’s Solution Preferred has configured a BurnerMate TS system to be a wire-for-wire replacement for the CB Hawk system.  Existing control panel, entrance box, control switches, flame scanner, and operating limits are re-used.  Existing solid state gas and oil pressure sensors can be re-used for monitoring purposes. But don’t! They will fail eventually too and replacement parts are unavailable.

10. Easy Set-Up Fill-in-the-blanks on factory-configured screens.

11. Full Color Graphics

12.  The screen pages closely resemble the language and logic of the old Hawk systems.  “Fill-in-the-Blanks” commissioning.  Operators should not be intimidated and won’t have to “re-learn.”

13. Retrofit Advantages  Lowest cost, full function replacement  Easiest Conversion  Technology proven in thousands of PCC-III and DCS-III installations  Lowest install time

14. Product Improvements  Touch-screen is easier to use.  DCS-III is configurable for future upgrades.  PV inputs are standard, non-proprietary.  Gas and oil switches are standard, non- proprietary.  10” touch-screens are available  NFPA compliant  U.L. 508 compliant

15. Product Improvements  Ethernet IP-Standard  Modbus-Standard  Remote monitoring through standard web browser. The BurnerMate TS can communicate with building management systems, energy management systems, or a DCS via open protocols including:

16. Cost Competitive  Material cost is under $15,000.  Product is packaged for easy installation in existing Hawk enclosures. This makes for a less expensive project than CB’s upgrade options.

17. Support  Proven BurnerMate Technology.  Fewer proprietary parts.  Industry-standard communications.  Software is pre-programmed for simplicity, but can easily be expanded for more functionality.  Rep and factory support available.  Free factory training is available.

18. Conclusion Contact your local Preferred representative or our factory if you have questions.

19. Factory Sales Offices located throughout the U.S., supported by sales representative organizations. PREFERRED UTILITIES MFG CORP