1. NURUL JANNAH BINTI RUSMAN (2130804) ZURINA BT MUHAMMAD (2130809) FATIN NADIAH BINTI MOHAMED ARIFF (2130487)

2. Team’s Organisation Chart And Responsibilities

3. Location and Field HQ Design Layout

4. HQ design layout

5. Mesh network topology Decentralized design in which each node on the network connects to at least two other nodes Mesh topology do not require router to deliver Internet service, network nodes can "talk" directly to each other without requiring the assistance of an Internet connection Advantage Mesh Topology decentralized topology is that there cannot be a single point of failure. If one node can no longer operate, all the rest can still communicate with each other, directly or through one or more intermediate nodes.

6. Mesh networks can use a full mesh topology or a partial mesh topology full mesh topology each network node is connected to all the other nodes in the network full mesh network with six nodes

7. partial mesh topology At least one node connects directly to every other node while others may only connect to those nodes they exchange data with on a frequent basis.

8. Network Device and Equipment Wireless routers PC or Laptop with a LAN card Standard CAT5 LAN cable Power-over-Ethernet adapters Directional antennas Omni-directional antennas (for hotspots) Lighting protectors (if equipment will be installed outdoors) Printer Server/ Work station AC/DC adapter

9. Software Requirements Frei funk firmware version 1.4.5 DD-WRT firmware version 2.3 Putty.exe Tcpdump dot-draw Furniture Chair We need one chair per/person and the total of the chair is 6 Tables We need one table per/person and the total of the table is 6

10. Security Features/ Reliability Self-forming The wireless mesh network forms automatically once the mesh nodes have been configured and activated. Fault tolerance If redundant routes exist in the network, information flow is not interrupted in the rest of the network when one node fails. The network will dynamically reroute the information via the next available route. Self-healing Once restored, a node re-joins the mesh network seamlessly. Community ownership Ownership of the network is shared, hence the burden of network support does not rest with a single person. Low cost of infrastructureMesh nodes can be built from low cost, common-off-the shelf equipment.

11. Estimation Costs (in RM)

12. Conclusion The network design that we choose is the best way to use for this mission. We should use this network based on its simplicity and capability of the network. The design uses less man power to install and it is easy to deploy so that many of the staff can focus to the main mission