Presentation is loading. Please wait.

Presentation is loading. Please wait.

House Painting Checklist – 7 Steps to Prepare Wall Surface for Painting Contact No : 905 830 2776 Address : 8 parr street, Toronto,

Similar presentations


Presentation on theme: "House Painting Checklist – 7 Steps to Prepare Wall Surface for Painting Contact No : 905 830 2776 Address : 8 parr street, Toronto,"— Presentation transcript:

1 House Painting Checklist – 7 Steps to Prepare Wall Surface for Painting Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3 Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3

2 Color changes everything and when it comes to painting your house, it rearranges your reality. Preparation is of the utmost concern for any house painting project. Before you start painting your house you need to prepare a checklist and make sure you follow it. Here are 4 points of the house painting checklist to make your painting go smoother and faster and giving a professional-looking finish: Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3 Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3

3 Washing Washing is the first step that needs to be done while commencing the work of painting a house. Wash the walls with a hose and get rid of any stubborn dirt with a scrub brush using warm and soapy water. It can also be done using a power washer. When you are looking to paint a bathroom or kitchen, prepare a washing solution by mixing approximately three teaspoons of laundry detergent to one gallon of water and then use this solution to wash the walls. Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3 Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3

4 Scrape The next step is scraping any cracked or flaking paint with a paint scraper. Small areas of defective paint can be removed using a wire brush and a wide-blade putty knife. Scrub under the laps of clapboard siding as well as on downspouts and gutters. For metal surfaces, use a wire brush attachment on an electric drill, it will remove dust and paint easily from metal surfaces. If you are looking for extensive paint removal then you will have to use a sharp pull scraper which has a replaceable blade capable of stripping old paint all the way down to bare wood with a single scrape. Other minor imperfections on the wall like plaster bumps can be smoothened away with sandpaper, this can be done by rubbing the surface with a piece of sandpaper stapled to a sanding block, or you can even use an electric sander. Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3 Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3

5 Caulk Now we move on to the next step called caulking. Caulking is a process which people often tend to forget when they do interior painting projects. Caulk is a type of product or sealant (usually a blend of acrylic and silicone) used to seal seams and cracks that exist, where surfaces meet. Caulks come in different colors. The tools needed for caulking are - caulk gun, a putty knife, a razor knife, a tile-grout sponge and a bucket. Fill a bucket with warm water. Hold the caulk gun at a 45 degree angle and cut a small opening at the tip of crack and squeeze the handle so an even amount of caulk flows from the tube. Keep the caulk slightly higher than the top of the gap or crack. Once the caulking has been applied, smoothen it out either with a finger or wet rag. Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3 Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3

6 Putty Putty is a type of plastic material similar in texture to clay or dough used in domestic construction and repair as a sealant or filler. Painter's Putty is typically a linseed oil based product used for filling holes, minor cracks and defacements in wood only. Putty is used on fresh wall to balance level and smoothen the surface by filling blemishes, cracks, holes on masonry surface to give it a beautiful look and make it ready to paint. With application of putty you can get more coverage of paint and the wall also becomes water proof. To apply putty, all new masonry surface to dry out completely. Smoothen the surface and apply putty. These were the first 4 steps of painting checklist that you need to adhere to before initiating house painting. In the next article, we will cover the remaining 3 steps of this house painting checklist. For more information on house painting in Toronto and Mississauga, visit - http://www.sharrisonpainting.com/ http://www.sharrisonpainting.com/ Putty Putty is a type of plastic material similar in texture to clay or dough used in domestic construction and repair as a sealant or filler. Painter's Putty is typically a linseed oil based product used for filling holes, minor cracks and defacements in wood only. Putty is used on fresh wall to balance level and smoothen the surface by filling blemishes, cracks, holes on masonry surface to give it a beautiful look and make it ready to paint. With application of putty you can get more coverage of paint and the wall also becomes water proof. To apply putty, all new masonry surface to dry out completely. Smoothen the surface and apply putty. These were the first 4 steps of painting checklist that you need to adhere to before initiating house painting. In the next article, we will cover the remaining 3 steps of this house painting checklist. For more information on house painting in Toronto and Mississauga, visit - http://www.sharrisonpainting.com/ http://www.sharrisonpainting.com/ Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3 Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3

7 About Sharrison Painting And Renovations Sharrison Painting And Renovations is a Toronto (GTA) based painting and renovations company. They specialize in house painting, drywalling, taping, electrical, flooring, framing and many other essential services. Sharrison offers a wide range of renovation work and painting services in and around Mississauga & Toronto (GTA) region. For more information visit - http://www.sharrisonpainting.com/http://www.sharrisonpainting.com/ About Sharrison Painting And Renovations Sharrison Painting And Renovations is a Toronto (GTA) based painting and renovations company. They specialize in house painting, drywalling, taping, electrical, flooring, framing and many other essential services. Sharrison offers a wide range of renovation work and painting services in and around Mississauga & Toronto (GTA) region. For more information visit - http://www.sharrisonpainting.com/http://www.sharrisonpainting.com/ Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3 Email: khs@rogers.com Contact No : 905 830 2776 Address : 8 parr street, Toronto, Ontario, Canada - M6j2e3


Download ppt "House Painting Checklist – 7 Steps to Prepare Wall Surface for Painting Contact No : 905 830 2776 Address : 8 parr street, Toronto,"

Similar presentations


Ads by Google