1. Architectural Drawing II Architecture 173 Julio Hernandez 6/01/15 Revit Modeling

2. Architectural Drawing II LATTC- Offered course for those with Architectural ambitions Architectural drawing II is one class of a set class that cumulatively make up a grogram for architecture enthusiasts offered at LATTC that includes required reading material and lab time. The Architecture program at LATTC is an intense program that lends itself to its students in any way possible to aid and assist them, in order to see their success and growth in the field.

3. Architectural Drawing II The required reading material is 6 th Edition Architectural Drafting & Design By Allan Jefferis, David A. Madsen and David P. Madsen The required lab book is Architectural Commercial Design Using Autodesk Revit 2014 By Daniel John

4. Architectural Drafting II Reading Material: is very informative, held a lot of information, not just information on building trades but on using the AutoCAD program as well. Chapter 27 is a chapter that stands out, it is one of the most informative chapters, which has lot of pertinent information on framing methods.

5. Architectural Drafting II Chapter 7- held a lot information related to Computer aided drafting and construction document drafting- some of the information is a little dated but all in all it was a good read and like mentioned before very informative. Chapters 33-35 were all about foundations systems and floor systems and everything that has to do with the base of a building or structure, and the distributing of the structures load at its base.

6. Architectural Drawing II Is the required reading and reference material for the lab work There were two project that the book help: the first was a one story open lab room and the second project was the three story Multi-purpose room.

7. Architectural Drawing II First project for 173 Lab Which was easing us in to the main project the three story building.

8. Architectural Drafting II

9. Architectural Drawing II

10. Architectural Drafting II

16. CSI (CONSTRUCTION SPECIFICATIONS INSTITUTES) Learned the format and did two examples for the projects we had in class. Last thing we learned was placing our work on mahara in order to be able to share it with our peers.