1. doc.: IEEE 802.15-10-0777-00-0006 Submission, Slide 1 NOTE: Update all red fields replacing with your information; they are required. This is a manual update in appropriate fields. All Blue fields are informational and are to be deleted. Black stays. After updating delete this box/paragraph. Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [Resolution of TG6 Draft D0 comment related to wakeup mechanism] Date Submitted: [15 September, 2010] Source: [Ranjeet Kumar Patro] Company [Samsung Electronics] Address [Bagmane Lakeview, Block ´B´, No. 66/1, Bagmane Tech Park, C.V. Raman Nagar, Byrasandra, Bangalore, Karnataka, 560093, India] Voice:[+91 80 4181 9999], FAX: [+91 80 4181 9999], E-Mail:[rkp.atd@samsung.com] Re: [Proposed Resolution of D0 Comments] Abstract:[Description of document contents.] Purpose:[Description of what the author wants P802.15 to do with the information in the document.] Notice:This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15.

2. doc.: IEEE 802.15-10-0777-00-0006 SubmissionSlide 2 Proposed Resolution of D0 Comments related to wakeup mechanism,

3. doc.: IEEE 802.15-10-0777-00-0006 SubmissionSlide 3 T-Poll Vs Wakeup, 1. Wakeup should be supported in the Non Superframe mode as well T-Poll is unnecessary in the Non Superframe mode 2.T-Poll has current allocation number field of 1 octet in size… Current allocation number has no meaning in the wakeup for the devices which has immediate allocation (specially Non Superframe mode): additional transmission of 1 octet for wakeup

4. doc.: IEEE 802.15-10-0777-00-0006 Submission, Slide 4 Resolution 1 Keep both T-Poll and Wakeup frames, both required Change the section 7.8.1 name to unconnected wakeup mechanism Change the section 7.8.2 name to connected wakeup mechanism Change the section 7.8.2.1.3 name to Multicast lockup mechanism Change the section 7.8.2.1 Unicast wakeup mechanism Support the wakeup with known IEEE address, in such case contention among implant device is not required

5. doc.: IEEE 802.15-10-0777-00-0006 SubmissionSlide 5 Resolution 2, 1.Change T-Poll frames field such that it can be used for waking up any device in any mode 2.Add a field in T-Poll equivalent to session length in Wakeup frame. 3.Change the section 7.8.1 name to unconnected wakeup mechanism 4.Change the section 7.8.2 name to connected wakeup mechanism 5.Change the section 7.8.2.1.3 name to Multicast lockup mechanism 6.Change the section 7.8.2.1 Unicast wakeup mechanism 7.Support the wakeup with known IEEE address, in such case contention among implant device is not required