2. 2014 GMNA Hearing Conservation and Noise Control Program Report Summary Presentation Eltaneice Bolden GM Global Industrial Hygiene Manager

3. Report Contents  Summary of Results  Sound Exposure Data  Occupational Hearing Loss Cases  Hearing Conservation Program –Audiometric testing –Prevalence of recordable hearing loss –Training  Noise Control Engineering  Top 5 Overall Noise Issues  Action Plan

4. Summary  Noise exposure levels over 85 decibels (TWA) increased by 2% from the previous year due largely to reductions in headcount combined with an increase in the number of employees included in the HCP.  A notable increase in the number of recordable hearing loss cases in 2014 compared to the previous year.  Audiometric testing and training exceeded 100% in all functional groups.  Engineering expenditures for noise control in 2014 increased when compared to 2013.

5. Hearing Conservation Program Composition 6,040 employees 9.4% of the total workforce An Increase of 1.6% from 2013 Hearing Conservation Program Composition 6,040 employees 9.4% of the total workforce An Increase of 1.6% from 2013 Exposure Greater than 90 dBA TWA 907 employees (1.4% of the workforce) Reduction of 20 employees from 2013 Exposure 85 - 90 dBA TWA 5,133 employees (8.0% of the workforce) reduction of 139 employees from 2013 Sound Exposures

6. Sound Exposures by Manufacturing Group

7. Hearing Loss Cases Year over Year STS+ have increased significantly (by 52%) as the number of workers receiving audiograms has increased as well.

8. 2014 – Recordable Injuries  GMNA experienced 164 recordable hearing loss cases (STS+)  The Five top Contributing Sites Flint Metal Center recorded 54, or 33% Defiance recorded 27, or 16.5% Marion recorded 17, or 10.4% Wentzville recorded 7, or 4.3% Bedford reported 5, or 3%  In addition there were 137 STS cases reported in GMNA

9. Percentage of Exposed Workers with Recordable Hearing Loss

10. Audiometric Tests Expressed as a Percent of Exposed Workers

11. Note: Well over 100% of employees were trained on the HCP HCP Training Expressed as a Percent of Exposed Workers

12. Noise Control Expenditures OSHA requires engineering control of noise sources that cause exposures > 90 dBA.  Estimated 2,016 hours devoted to noise control in 2014  Estimated $1.23 Million Total noise control engineering expenditures in 2014

13. Engineering Expenditures

14. 2014 Top 5 Self Identified Noise Issues  (CET) Compressed Air Blow off  (CET & VA) Fork truck entering Trailers  (VA) Weld Destruct Booth  (CS) Stamp Press Noise  (CS) Scrap Conveyors

15. Action Plan 1.Continue to increase the focus on “buy quiet” and engineering controls to reduce exposure to noise levels to 80 dBA. 2.Continue to ensure that 100% of the number of employees in the HCP have audiograms and receive adequate HCP training. 3.Increase focus on proper use of hearing protection devices at the floor level through safety talks and safety observation tours.

16. Action Plan 4.Enhance communication and involvement on Noise buy-off requirements in Change Management Process across all mfg. functions. 5.Site NCHP Committees should focus on eliminating their top 3 affected noise problems as reported in the SSR. 6.Leverage the UAW-GM Safety System and S&IH Management System standards and GAP Analysis tools to ensure that all elements of the Hearing Conservation Program are completely implemented.

17. Noise Report - Backup Slides

19. Global Safety & IH – Technical Standards Replace SL 1.0; SL 2.0 and SL 3.0

20. Data Reported by Region GMN1 Sites CET St. Catherines CET Tonawanda Engine SC Marion Metal Center SC Parma Metal Center VA CAMI VA Fairfax Assembly VA Hamtramck Assembly GMN2 Sites CET Bay City Components CET DMAX CET Romulus Engine CET Saginaw Metal Casting CET Warren Transmission SC Pontiac Metal Center VA Lansing Delta VA Lansing Grand River VA Orion GMN3 Sites CET Baltimore Transmission CET Bedford Foundry CET Defiance Foundry CET Toledo Transmission SC Lansing Regional Stamping SC Lordstown Metal Center VA Bowling Green Assembly VA Lordstown Assembly VA Spring Hill Manufacturing GMN4 Sites CET Flint Engine Operations CET Ramos Arizpe Engine & Trans CET San Luis Potosi Transmission SC Flint Metal Center VA Arlington Assembly VA Fort Wayne Assembly VA San Luis Potosi Assembly VA Silao Assembly VA Wentzville Assembly GMN1 Sites NM Flint Tool and Die NM Milford Proving Grounds NM Powertrain Headquarters NM Warren Tech Center NM Wixom Engineering NM Yuma Desert PG NM Toluca Engineering