1. Introduction to GENEX Probe
Huawei GENEX Series
Introduction to GENEX Probe

2. Contents GENEX Overview GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study

3. Huawei GENEX Family GENEX Nastar Network Performance Analysis System
RNC
GENEX U-Net
Radio Network Planning Tool
Downlink + Uplink
GENEX Probe
GENEX Assistant
Test & Post-Process Tools
GENEX Nastar
Network Performance Analysis System
GENEX U-Net is a radio planning tool that fully supports the technologies of GSM,GPRS-EDGE, CDMA IS95, WCDMA/UMTS/HSDPA/HSUPA, CDMA 2000/1xRTT/1xEVDO, and TD-SCDMA wireless networks.
The GENEX Probe, network optimization and drive test data collection system, is an air interface test tool for WCDMA/HSDPA/HSUPA/GSM/GPRS networks.
GENEX Assistant is a professional wireless test data post-processing software system.
GENEX Nastar is a platform for monitoring and optimizing the performance of GSM/CDMA/WCDMA wireless networks

4. GENEX covers the network lifecycle
Whole Flow Overview
Nastar
GENEX covers the network lifecycle
Radio Network Planning Tool
U-Net
Probe&Assistant
Air Interface Test Tool and Post-Processing Tool
Probe&Assistant
The GENEX Family integrates the advanced concepts and rich experiences in the field of network planning and optimization.
Nastar
Network Performance Analysis Tool
Make full use of 2G resources
U-Net

5. GENEX Partners in The World
Applied in the Huawei 2G and 3G planning and optimization projects
Covers more than forty countries, including commercial and pilot offices
Assists the renowned operators in establishing and optimizing the network with high quality.
The network operators include but not limited to: China Mobile, China Unicom, China Telecom, China Netcom, Vodafone, PBTL, T-Mobile, Orange, CellPlus, PCCW(Sunday), Telecom, eMobile.
Aims at consistently providing the customers with professional and high-level solutions for network planning and optimization.
Employed by network operators and designing institutes all over 26 provinces and municipalities
Integrates the experiences of renowned operators, advancing with customers hand by hand.
The GENEX Family becomes an essential tool for Huawei engineers involved in network planning and optimization, and gains recognizable achievements and reliability in the commercial use.

6. Contents GENEX Overview GENEX Probe General Workflow
Using Probe for HSDPA / HSUPA DT Data Collection
Other Features
Case Study

7. GENEX Probe drive test system
Huawei Dual Mode Mobile(U626/U636)
Qualcomm TM6250/ 6275
*Support WCDMA 850/ /1900/2100Mhz
AT Command Supported Mobile
GARMIN Series
GPS
Huawei WCDMA/HSDPA Data card
Trimble Series
GPS
Anritsu Scanner
DTI Scanner
(Built-in GPS)
open platform of various equipments
Equipment Composition
support multi UE carry out different tests simultaneously
Probe drive test system is composed of Test UEs, GPS (external or internal) ,and Scanners .There is no need to connect all of them if you don’t need some part of the information. For example, you can only use scanner (DTI has its internal GPS) and UE, or scanner only ,or UE only, or UE and GPS .
Physical connection
Equipment bag
easy to carry and suitable to be used in the car

8. Contents GENEX Overview GENEX Probe General Workflow
Using Probe for Data Collection
Other Features
Case Study

9. DT Operation Flow Probe Installation.
Plug Probe dongle. (Must be installed Shared – Hardware key)
Connect Hardware device to the laptop.
Hardware device configuration.
System Configuration. (Set Log mask)
Test Plan Configuration.
Open the parameter widows you want to observe, such as RSCP and Ec/Io in Active Set, Monitor Set; HSDPA Serving Cell, throughput; RRC Message, NAS Message, etc.
Import engineering parameters, open Map window and import the related Mapinfo file (.TAB). (Routes, Streets, etc)
Start Test, start recording.
After the test finished, press "Stop Test“ button.
If you don't use "Testplan" to start test automatically, please "Start Test“ first, then start to setup the call test to avoid missing some important data.
Notes: If you don't use "Test Plan" to start test automatically, please "Start Test” first, then start to make call test.

10. Probe Interface
Workspace Area
Navigation
Area
Status Area

11. Probe Interface
Navigation View

12. Project Template Project Template Site Verification Optimize Benchmark
Acceptance
Customize

13. Hardware Configuration Before Test
In Navigation Area
Delete
Device
Add
Device
Hardware
Test !!
Connect and config devices one by one
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.

14. Hardware Configuration Before Test
PS domain tests (Data Service) need set Modem port. !!
Hardware Configuration Test
Hardware
Test
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.
Devices status bar

15. Hardware Configuration Before Test
Hardware configuration – Windows port allocation (port number)
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.

16. Hardware Configuration Before Test
Hardware configuration – General Parameters – Personal Main Cities Test
Device
Type
Model
Baudrate
Com Port
Modem Port
MSISDN
Scanner1
Scanner
DTI WCDMA ( MHz)
115200
A definir
UE1 UE
HUAWEI U1205
230400
UE2
UE3
HUAWEI E270 Card***
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.
*** No es el modelo pero funciona adecuadamente

17. Hardware Configuration Before Test
Hardware configuration – General Parameters – Personal Acceptance Test
Device
Type
Model
Baudrate
Com Port
Modem Port
MSISDN
UE1 UE
HUAWEI U1205
230400
A definir
UE2
UE3
HUAWEI E270 Card***
*** No es el modelo pero funciona adecuadamente
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.

18. DT Operation Flow Probe Installation.
Plug Probe dongle. (Must be installed Shared – Hardware key)
Connect Hardware device to the laptop.
Hardware device configuration.
System Configuration. (Set Log mask)
Test Plan Configuration.
Open the parameter widows you want to observe, such as RSCP and Ec/Io in Active Set, Monitor Set; HSDPA Serving Cell, throughput; RRC Message, NAS Message, etc.
Import engineering parameters, open Map window and import the related Mapinfo file (.TAB). (Routes, Streets, etc)
Start Test, start recording.
After the test finished, press "Stop Test“ button.
If you don't use "Testplan" to start test automatically, please "Start Test“ first, then start to setup the call test to avoid missing some important data.
Notes: If you don't use "Test Plan" to start test automatically, please "Start Test” first, then start to make call test.

19. System Configuration Before Test
Log Mask setting
Set Log Mask
Set Log Name
Set Log file size
Location of saved logs

20. Log Mask Setting Before Test
Log Mask setting – General Parameters – Personal Main Cities Test
Log item Setting: Valores que aparecen por defecto
Device
Limit
Size Type
Minutes
Log File Directory
Scanner1
Limited
Time (Minutes) 15
A convenir
UE1
UE2
UE3
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.

21. Log Mask Setting Before Test
Log Mask setting – General Parameters – Personal Acceptance Test
Log item Setting: Valores que aparecen por defecto
Device
Limit
Size Type
Minutes
Log File Directory
UE1
Limited
Time (Minutes) 15
A convenir
UE2
UE3
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.

22. System Configuration Before Test
Event setting
We can define the event we need through Event setting.

23. System Configuration Before Test
Alarm setting
We can define the alarm event we need through Alarm setting.

24. System Configuration Before Test
Other setting
We can set the Time Record Mode for a Log Packet, GPS synchronization Mode, DialUp Property for Data Service, Display Filter for Log Data, Replay Mode for Event and Parameters for DTI Scanner which we need through other setting.

25. DT Operation Flow Probe Installation.
Plug Probe dongle. (Must be installed Shared – Hardware key)
Connect Hardware device to the laptop.
Hardware device configuration.
System Configuration. (Set Log mask)
Test Plan Configuration.
Open the parameter widows you want to observe, such as RSCP and Ec/Io in Active Set, Monitor Set; HSDPA Serving Cell, throughput; RRC Message, NAS Message, etc.
Import engineering parameters, open Map window and import the related Mapinfo file (.TAB). (Routes, Streets, etc)
Start Test, start recording.
After the test finished, press "Stop Test“ button.
If you don't use "Testplan" to start test automatically, please "Start Test“ first, then start to setup the call test to avoid missing some important data.
Notes: If you don't use "Test Plan" to start test automatically, please "Start Test” first, then start to make call test.

26. Test Plan Configuration Before Test
Control each device's behavior by selecting Test Plan items and setting property parameters of each test items.

27. Test Plan Configuration Before Test
Test Plan Configuration – Add & Config Scenarios for UE
Set the Test Plan respectively for each device (UE/Scanner).
1. Select Test Device
4. Set Test Properties
2. Add Test Scenario
3. Add Test Item

28. Test Plan Configuration Before Test
Test Plan Configuration – Auto Call scenario
Check the enable status !!
To modify the scenario
To run scenario automatically

29. Check the enable status
Test Plan Configuration Before Test
Test Plan Configuration – Add & Config Scenarios for DTI Scanner
2. Set Item Property
1. Select Test Item !!
Check the enable status

30. Test Plan Configuration Before Test
Set Test Plan for UE
1. Voice call
Suggestion: When testing voice call, do not perform PS dialup on the Modem of the outgoing UE manually. Otherwise, voice call maybe hangs up abnormally.
The UE that is performing PS services can serve as an incoming UE for Voice Call
or Video Phone test. Thus, the CS and PS concurrent test can be performed on the same UE.

31. Test Plan Configuration Before Test
Parameters for Voice Call:
Call type
Continuous Call: The call continues if it does not fail, drop, or hang up. If the call fails, drops, or hangs up, Probe waits for a call interval to originate another call.
Call by Call: call: The call lasts and waits for the predetermined calling duration and call interval, and repeats for the times defined in call count.
Setup time: the maximum time for call setup. If the call cannot be setup within the defined period, the call setup fails.
Calling duration: the duration of one call, from call setup to call normal release. (apply only to call by call)
Call interval: the time between two calls, from the previous call disconnection to the beginning of the next call.
Exceptional Interval ：The interval between the exceptional end of a call drop and the beginning of the next call.
Count Mode: the limitations on the call number -> Finite / Infinite.

32. Test Plan Configuration Before Test
Set Test Plan for UE
2. Ftp Upload / Ftp Download
Note: PS connection can be set up by one FTP Download test item if correct APN has been set in UE.

33. Test Plan Configuration Before Test
Parameters for Ftp Download / Ftp Upload :
User, Password: FTP user name and password. For anonymous login, also need to input “anonymous” as username.
Remote File: Destination file address, input the detailed download path, such as, ftp:// /download/1.dat
Local File: Local path to save the download file, such as, C:\1.dat
MultiTask Count: When we use multi-threading download, set the number of threads here.
Test Interval (sec): The time interval between multi downloads. After finishing a download, wait for several time, then start another download test.
FTP Count: the total number of ftp download test.

34. Test Plan Configuration Before Test
Parameters for Ftp Download / Ftp Upload:
Disconnection Mode: the mode of Disconnection, there are three choices:
Keep Disconnected: Do not perform PDP context deactivation ( remain RRC connection) after the target files are loaded completely, just wait for interval time then continue next ftp download test.
Disconnect By Time: Perform PDP context deactivation periodically. The period for the PDP context deactivation is represented by the Valid FTP Duration parameter. If the target files are not loaded completely within the predefined time, the loading result shows timeout. Probe considers this loading as failure and initiates another PDP context deactivation in the next loading.
Disconnect After Transfer Complete: Each time when the file load is complete, PDP context deactivation would be performed.
FTP QoS : Indicates the type of the traffic as:
􀁺 Background class
􀁺 Conversational class
􀁺 Interactive class
􀁺 Streaming class
􀁺 Subscribed class
FTP Upload:
Parameters are the same with FTP download’s. Probe will upload the local file to the
destination path automatically.
**Make sure you have the authority to upload file before test.

35. Test Plan Configuration Before Test
About APN, QoS Setting
If leave APN, QoS parameters blank
Probe won’t send the associated command to the UE if the parameters mentioned above is not set, that is the UE’s default setting will be maintained.
Methods for setting APN, QoS and their correlationship
1) Set by AT command in MODEM initial command
2) Set by Probe in Test Plan
When both Probe and MODEM have APN and QoS information, because AT command in MODEM initial command is send to UE more closely before PS connection setup, it will replace the information send to UE by Probe. That is Probe’s setting doesn’t work if AT command also exists in the MODEM initial command. !!

36. Test Plan Configuration Before Test
About APN, QoS Setting
Method 1 (By Windows) Method 2 (by Probe)

37. Check the enable status
Test Plan Configuration Before Test
Set Test Plan Configuration for DTI Scanner !!
Check the enable status

38. Test Plan Configuration Before Test
Test Plan Voice Call Short Call – General Parameters – Personal Main Cities and Acceptance Test
UE: UE1
Scenario Name: Short Call
Test Item: Voice Call
Destination: A definir
Call Type: Call by Call
Setup Time(sec): 20
Call Duration(sec): 60
Call Interval(sec): 10
Exceptional Interval(sec): 20
Count Mode: Infinite
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.

39. Test Plan Configuration Before Test
Test Plan Voice Call Long Call – General Parameters – Personal Main Cities and Acceptance Test
UE: UE2
Scenario Name: Long Call
Test Item: Voice Call
Destination: A definir
Call Type: Call by Call
Setup Time(sec): 20
Call Duration(sec): 180
Call Interval(sec): 10
Exceptional Interval(sec): 20
Count Mode: Infinite
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.

40. Test Plan Configuration Before Test
Test Plan FTP Test Download – General Parameters – Personal Main Cities and Acceptance Test
UE: UE3
Scenario Name: FTP Download
Test Item: Ftp Download
Port: 21
User: A definir
Password: A definir
Remote File: A definir
Write Local File: False
MultiTask Count: 5
Test Interval(sec): 5
Ftp Count: 999
Disconnection Mode: Disconnected after transfer complete
Traffic Class: Background Class
UL Max Rate(Kbps):
DL Max Rate(Kbps):
APN:
gprs.personal.com
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.

41. Test Plan Configuration Before Test
Test Plan Scanner – General Parameters – Personal Main Cities Test
Scanner: Scanner1
Item Name*: TopN Pilot Scan Enable: TRUE
Channel: A convenir Measure Rake Finger Count: FALSE
Scanner Type: A convenir Measure SIR: TRUE
Pilot Number(N): 10
Correlation Taps: 1
Chip Window Size: 32
PNThreshold(dB):
ScanRate(ms): 100
Measure Ec/Io: TRUE
Measure Time Offset: FALSE
Measure Aggregate Ec/Io: TRUE
Measure Delay Spread: FALSE
Measure Eps/Io: FALSE
Measure Ess/Io: FALSE
*Los demas Item Name (Pilot Scan, Spectrum Analysis, CW, SCH Scan, RSSI 3.84M) deben estar en FALSE en la opcion de Enable.
Configuration of COM port is compulsory, otherwise, Probe won’t keep track of any data.
If Modern port is not configed, Probe still can keep track of part of the data, but can not start PS domain test automatically by Testplan, can not keep track of the throughput on the application layer, either.
Probe is well-supported to terminal with Qualcomm’s chips.
Probe can also support newfashioned UEs. But there maybe some problems on displaying parameters for the inner interface has been changed.
When the terminal model does not exist on the list, please config a similar one.
In addition, we suggest to check whether the associated parameter can normally displayed before the test.

42. DT Operation Flow Probe Installation.
Plug Probe dongle. (Must be installed Shared – Hardware key)
Connect Hardware device to the laptop.
Hardware device configuration.
System Configuration. (Set Log mask)
Test Plan Configuration.
Open the parameter widows you want to observe, such as RSCP and Ec/Io in Active Set, Monitor Set; HSDPA Serving Cell, throughput; RRC Message, NAS Message, etc.
Import engineering parameters, open Map window and import the related Mapinfo file (.TAB). (Routes, Streets, etc)
Start Test, start recording.
After the test finished, press "Stop Test“ button.
If you don't use "Testplan" to start test automatically, please "Start Test“ first, then start to setup the call test to avoid missing some important data.
Notes: If you don't use "Test Plan" to start test automatically, please "Start Test” first, then start to make call test.

43. Parameter Window
Common used windows for HSDPA & R99

44. Parameter Window WCDMA - Serving, Active Set & Neighboring Cells
Display PSC, RSCP, Ec/Io for active set, monitor set and detective set
In the figure, rectangle legend implicates active set data, circle implicates monitor set data, and triangle implicates detected set data. The data of the same type is distinguished from each other with different colors. Move the mouse to a place to get the scrambling code of the current point.
When the UE is in idle state, PSC in active set is about the cell where the UE resides.

45. UL/DL transmit power control
Parameter Window
WCDMA - Power Control
DL SIR, SIR Target
Rx: UE received power;
Tx: UE tx power
UL/DL transmit power control
Note: Whether SIR Target information can be acquired depends on the UE. UEs within Qualcomm’s chips don’t report SIR Target.

46. Parameter Window WCDMA - WCDMA BLER
Displays BLER of different transport channels.
In HSDPA connection mode, A-DPCH's DL BLER is being displayed.
Accompanying-DPCH

47. Parameter Window WCDMA - HSDPA Link Statistic 1. Delta vs Average
Delta is the average value in 200ms
Average is the average value from the beginning of stat. to the current time. You can choose to clear the former stat. data. The values displayed by Assistant are all belong to Delta serial.
2. Parameters about rate
Scheduled Rate = The total block size scheduled to the UE during stat. time / (Total time slot scheduled to the UE * 2ms)
Served Rate = The total block size scheduled to the UE during stat. time /stat. time length
HS-SCCH Success Rate = time slot number scheduled to the UE during stat. time / total time slot number during stat. time
When multi UEs share a HS-SCCH channel, they will share channel resource. So, HS-SCCH Success Rate reflects the time ratio of a UE occupies HSDPA resource. The closer to 100% of total HS-SCCH Success Rate from UEs who share a HS-SCCH channel, the better schedule performance the system has.
Served Rate = Scheduled Rate * HS-SCCH Success Rate
Mac Layer Rate = Served Rate * (1- SBLER)
3. SBLER vs Res.BLER
SBLER is MAC-hs error block / total MAC-hs transmission block, IBLER configed on NodeB have an effect on SBLER, typical value of IBLER is 10%, and common value range of SBLER is 10%~15%.
Res.BLER means remain BLER, which is RLC layer BLER. One transmission block only after multi-times’ unsuccessful MAC-hs retransmission, will be caculated as RLC layer error block, stat. to Res.BLER.
We can see from the test result that RLC BLER is usually 0.

48. Parameter Window Message - MAC/RLC Messages
The MAC/RLC Messages window displays the messages about Media Access Control (MAC) and Radio Link Control (RLC). The messages are visible only when the associated items in LogMask are selected.

49. Parameter Window Message - RRC Messages
All the UEs or single UE are displayed on the window. The messages selected on the left navigation tree are displayed. The detailed information is displayed by double-clicking on the message.

50. Parameter Window Message - NAS Messages
Whatever mode UE is in, WCDMA, HSDPA or GSM, all the NAS messages are displayed here as follow:

51. Parameter Window Scanner – TopN Pilot & Spectrum Analysis
Top N Pilot test
DTI
Anritsu ML87xx Serials
Multi-path analysis only supported by Anritsu scanner.

52. Parameter Window Data Service - App Throughput
Display both UL and DL application layer data rate, NAS rate and TCP retransmission rate.

53. Parameter Window Data Service - RLC Throughput
Display both UL and DL RLC layer throughput, UL PDU retransmission ratio and DL PDU error ratio.

54. Parameter Window Data Service - FTP Service Quality Evaluation
Displays the associated indicators on the user plane of the FTP service, including Login time, download time, download rate, etc.

55. Parameter Window UE State
Displays the information of the mobile status and network parameters (cell, rnc, MCC, MNC, LAC, RAC)

56. Parameter Window Information
Displays the information of hardware used and the test plan running

57. Parameter Window
Map Window

58. Parameter Window
Map Window – Load WCDMA sites

59. www.huawei.com 演示： 1）新建工程，配置，开始测试 2）回放数据，地图显示，语音提示，连线，事件
Huawei confidential,

60. Contents Case1. Inter-RAT handover test
Case2. WCDMA inter-frequency handover test
Case3. Multi-frequency Scanning

61. Case1. Inter-RAT handover test
Event observation — Location of handover point

62. Case1. Inter-RAT handover test
Time of Handover signaling
Messages and measurement from different networks

63. Case2. WCDMA inter-frequency handover test
The signal frequency in active set is when the test starts
Signaling window
Log file:

64. Case2. WCDMA inter-frequency handover test
WCDMA inter-frequency handover process
Signaling observation before handover

65. Case2. WCDMA inter-frequency handover test
WCDMA inter-frequency handover process
Observe it again, and the frequency handover to

66. Case3. Multi-frequency Scanning
Simultaneous scanning of multi-frequency
2. Scanned multi-frequency
1. Set multi-frequency
3. Select specified frequency to observe it

67. Case3. Multi-frequency Scanning
Simultaneous scanning of multi-frequency
Simultaneous observation of different frequencies

68. www.huawei.com 演示： 1）新建工程，配置，开始测试 2）回放数据，地图显示，语音提示，连线，事件
Huawei confidential,