1. Lift Trucks for Ports, Terminals & Industries
Handling of containers, steel, aluminium, pipe, wood, paper, concrete, waste…10-32 T

2. Lift Trucks for Ports, Terminals & Industries
Handling of containers, steel, aluminium, pipe, wood, paper, concrete, waste…33-60 T

3. Fork Lift Trucks 28-33 tons Models: SMV 28-1200B SMV 32-1200B
Wheelbase:
4500 mm
4750 mm
Engines (CanBus) 28/ :
Volvo (Std) TAD-722-VE (180 kW / EU 2)
Option TAD-760/DC-9/QSB-6,7 (EU 3a)
TAD-762-VE (185 kW/3b)
Engines (CanBus) 32/ :
Scania (Std) DI-12-54A (222 kW / EU 2)
Option DC-12, TAD-12, QSM-11 (EU 3a)
Automatic Transmission (CanBus):
DANA TE (3+3 speed) 28/
DANA TE (4+4 speed) 32/
ZF 4WG-191 (3+3 speed) EU st 3b 28/
ZF 4WG-261 (4+3 speed) EU st 3b 28/
Drive axle (Wet Disc Brakes):
Kessler D91-B (80 T / W=3440 mm)
16.00x25”/PR28 ( … )
16.00x25”/PR32 ( )
Pumps:
Parker LS-pumps ( cc)
4 hydraulic servo levers (4 functions)
All lift trucks has full capacity up to 9000 mm lift height

4. Fork Lift Trucks 60-70 tons Models: SMV 60-1500B SMV 64-1200B*
* New & other models on request !
Wheelbase:
6000 mm
6000 mm*
Engines (CanBus):
Scania DI-12-55A (294 kW / EU 2)
Option DC-12-56A (294 kW / EU 3a)
Option (new) DC A2 (294 kW / EU 2)
DC A2 (294 kW / EU 3b)
Automatic Transmission (CanBus):
STD: TE (4+4)
OPT: ZF 4WG-311 (4+3) only EU st 3b
Drive axle (Wet Disc Brakes):
Kessler D111 (140 T / W=4,60 m / 21.00x35”)
Pumps:
Parker LS-pumps ( cc) STD 52-54
Parker LS-pumps (2x cc) STD 60-64
Full capacity up to 6000 mm lift height

5. Fork Shaft System (FSS) - forks, coil rams, clamps, spreaders…
13,6 T + Bale Clamp T + Dual Roll Clamp T + End Lift T + Coil ram/Forks
45 T + Coil ram/forks (Pin) T + Coil ram/forks (Hook) T + Inverted forks & Spreader

6. SMV 52-1200 Model 2010 / Scania 12L + Dana TE-27 + Kessler D106 + 18x33”/ EMC

7. SMV 12-1200 / Saw mill truck / Fork levelling fork / 4 packages

8. SMV 13,6-600 / Paper bale trucks / 8 T in clamp / Raised cab / EMC

9. SMV 13,6-600 / Paper bale trucks / 8 T in clamp / Raised cab / Freelift mast / EMC

10. SMV 16-1200 / Paper rolls / 12 T in clamp / 180 D rotator seat / Raised cab +500 / EMC

11. SMV 12-1200 / Scrap handling truck / 180 deg rotator carriage / Raised cabin 500 mm

12. SMV 45-1200 / Steel handling / Fork shaft system (quick-change) / Forks & Coil ram

13. SMV 16-1200 / Steel pipe truck / Grab attachment

14. SMV 18-1200 / Steel grab truck / Raised cab 1200 mm

15. SMV 52-1200 / Steel slab handling / Forks or Magnet / Hydraulic generator / 40 T slabs

16. SMV 52-1200 / Steel slab handling / Forks or Magnet / Hydraulic generator / 40 T slabs

17. SMV 45-1200 / Steel slabs / 4 forks - 1200 C / 2 forks + Magnet - 400 C / 38–45 T slabs

18. SMV 37-1200 / Concrete handling truck / wide carriage / 4 forks / raised side cabin

19. SMV 42/45-1200 / Rock handling trucks / Dusty conditions / Pin-type forks

20. SMV 18/25-1200 / Forks + Spreader on FSS / End stacking & container repair

21. SMV 37-1200 / General cargo truck / Fork shaft system (forks & coil ram)

22. SMV 42-1200 / 3 high 9’6” / ELME 815 (20-40 ft) / Inverted Forks

23. SMV 16/25-1200 / Boat loading / Double fork levelling - stroke 800 mm / Long forks