1. 5 Axis Machining Center MAM72-42V Matsuura Machinery Corporation

2. MAM72 Series MAM72-63V MAM72-25V MAM72-3VS/35V/M MAM72-42V

3. Development Concepts 1. Enhance the range of 5-axis machines 4. Offer flexibility with existing horizontal model 3. Offer 5 axis solutions to the existing applications 2. Target the small to medium size companies

4. Movement & Ranges X/Y/Z axis travel 520/730/510mm 20.47/28.74/20.07 inch Std. Automatic grease supply unit XYZ A axis travel +110° ～ -110°(Non-PC) A axis travel + 10° ～ -110°(With-PC) C axis travel 360°

5. Table Size φ300mm/11.81inch (Non-PC) Table Pallet Size □300mm/11.81inch (with-PC) Locking system

6. STD: 12k/BT#40/Grease lub. OP: 15k/20k/30k Spindle & ATC STD: 40 Tools (Chain Type) OP: 80 Tools : 240 Tools (Matrix type) 30T/rack : 320 Tools 40T/rack

7. APC Mechanism Unique “Flip Up Arm” design Compact footprint APC drive section set inside the fixed cover to prevent intrusion of chips

8. APC Pallet Changer Rotary Type: PC2 Floor Type: PC5 Floor Type: PC11 Stand alone Type: PC24 Pallet magazine & system Compatibility between MAM72-42V and H.Plus-300 Linear Type: PC17 and over

9. APC Stand alone PC24 1 2 3 4 5 6 A B C D Under Designing Less Floor Space

10. Swarf management X type of APC rotary door No cutting chips nearby the APC door No cutting chips

11. W type of telescopic cover + spirals Swarf management Cutting chips rapidly ransported

12. Upper side of the ATC cam box Swarf management Prevent chip accumulation Tilted 40 degree

13. ATC door and ATC arm cover Swarf management Prevent chips collecting on the ATC arm

14. Target Markets Aerospace Prototype (Automobile) Mold & die Medical

15. Thank you