Presentation is loading. Please wait.

Presentation is loading. Please wait.

53:071 Hydraulics and Hydrology Project #1 Pelton Turbine Allen Bradley, Loren Wehmeyer, Li-Chuan Chen, and Marian Muste.

Similar presentations


Presentation on theme: "53:071 Hydraulics and Hydrology Project #1 Pelton Turbine Allen Bradley, Loren Wehmeyer, Li-Chuan Chen, and Marian Muste."— Presentation transcript:

1 53:071 Hydraulics and Hydrology Project #1 Pelton Turbine Allen Bradley, Loren Wehmeyer, Li-Chuan Chen, and Marian Muste

2 Problem Statement A children’s museum in Colorado has purchased a small Pelton turbine for its new display on renewable energy.

3 Problem Statement The museum wishes to operate the turbine (with available flows) and sell the power on the open market. You have been hired as a consultant to the museum.

4 Project Objective Your job is to determine energy (kWh) that can be generated from the laboratory-scale Pelton turbine, and the revenue it can generate ($/year) for the museum.

5 Site Information The effective head for operations at the site is about 120 ft Variations in the forebay elevation are assumed to be minor

6 Operational Information The museum will operate the turbine 7 days a week (9 am to 4 pm). The museum has secured water rights to divert flows from the South Platte River. The allotted diversion depends on the average monthly flow rate in the river.

7 Laboratory Component Determine the energy conversion efficiency of the laboratory-scale Pelton turbine for the proposed operating conditions (H available, Q)

8 Engineering Analysis Components Compute the energy produced (kWh/yr) if operated as planned. Estimate the revenue that can be generated if the energy is sold on the open market ($/year). Prepare a one-page flyer on the exhibit (for distribution to museum visitors).

9 Principle

10

11 Laboratory Objective To determine energy conversion efficiency (  ) for the laboratory-scale Pelton turbine for three operational discharges (Q)

12 Laboratory Apparatus

13 Laboratory Procedures 1. TA sets the discharge and initial measuring speed with the brake off 2. Tighten the friction hand-wheel and record the torque and rotational speed 3. Repeat Step 2 with ∆N ≈ 50-100 rpm until the rotational speed reaches about 500 rpm 4. Measure the head on the weir (H 1 ) and record the reference point (H 0 ) 5. TA adjusts to a lower discharge and initial rotational speed 6. Repeat Steps 1 to 5

14 Data Sheet Data AcquisitionData Reduction H0H0 H1H1 P res. TNQP avai Pη Run 1 Run 2

15 Laboratory Analysis Determine the discharge using Q=2.49(H 1 -H 0 ) 2.48. Determine the efficiency of the turbine. Plot the rotational speed vs. the efficiency of the turbine. Show results for the three different discharges.

16 Sample Result

17 Project Report Provide the client (the museum director) with a concise report that answers the project objectives


Download ppt "53:071 Hydraulics and Hydrology Project #1 Pelton Turbine Allen Bradley, Loren Wehmeyer, Li-Chuan Chen, and Marian Muste."

Similar presentations


Ads by Google