DAESAN CORPORATION CO., LTD. INTRODUCTION Starting new management from October 2003, Daesan Corporation Co., Ltd has reached to produ ce various high.

DAESAN CORPORATION CO., LTD

INTRODUCTION Starting new management from October 2003, Daesan Corporation Co., Ltd has reached to produ ce various high quality glue tapes. With the goal to competitive and reasonable prices and reliable products, we have been being self-confident to satisfy all demands of consumers. VISION With the vision of “Environment Protection, Human Respect and Endless Te chnology Development” in management, we are a unit of such corporate philo sophy as love, diligence and harmony among men. This is our most motivation t o proceed in technical innovation field to meet all customer demands. In order to do this, we are always carrying out our strict policies in management to maintain and develop our company prestige to consumers, as follows: 1/. High quality and non-stop technical innovation 2/. Competitive prices 3/. Stable supply and flexible response to change 4/. Care for environment and resource conservation 5/. Stable managing foundation www.daesantapes.com.vn

www.daesatapes.com.vn ① ① ② ① ③ ④ ⑤ ⑥ ⑦ ⑦ ⑧ ⑨ ⑤ ⑥ ⑦ ⑧ ⑨ DS501 DS950FS DS904 DS904 DS900 DS904 DS900 DS906 DS910 DS503BF ⑦ ① ② ③ ④ DS517 DS502BL DS950FS DS976FS DS517KB DS500 DS906 DS514 DS501 DS503BF

Characteristics Water soluble, single coated tape with silicone coated release liner  Features Thin (total: 60microns) Excellent repulpability High temperature heat resistance Applications General purpose End tabbing & edge protection Overlap splicing Excellent for all types of manual splices where a thinner product is preferred Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties  Above technical information & data should representative or typical and should not be for inspection purposes. CarrierKraft paper 40g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=white AdhesiveWater soluble acrylic Release liner Silicone coated white paper (with PE) RepulpabilityCarrier=Yes, Liner=No Total thickness60 ± 5microns Adhesion (180 ⁰ peel 300mm/min) 870 ± 5%gf/25mm 8.5 ± 5%N/25mm Heat resistance 200 ⁰ C Elongation at breakCross 5% Tensile strength25±5N/25mm www.daesatapes.com.vn

Characteristics Water soluble, single coated tape with silicone coated release liner  Features Thin (total: 80microns) Excellent repulpability High temperature heat resistance Applications General purpose End tabbing & edge protection Overlap splicing Excellent for all types of manual splices where a thinner product is preferred Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties  Above technical information & data should representative or typical and should not be for inspection purposes. CarrierKraft paper 40g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=white AdhesiveWater soluble acrylic Release liner Silicone coated white paper (with PE) RepulpabilityCarrier=Yes, Liner=No Total thickness80 ± 5microns Adhesion (180 ⁰ peel 300mm/min) 1,000 ± 5%gf/25mm 9.8 ± 5%N/25mm Heat resistance 200 ⁰ C Elongation at breakCross 10% Tensile strength85±5N/25mm www.daesatapes.com.vn

Characteristics Water soluble, single coated tape with silicone coated release liner  Features Thin (total: 80microns) Excellent repulpability High temperature heat resistance Applications General purpose End tabbing & edge protection Overlap splicing Excellent for all types of manual splices where a thinner product is preferred Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties  Above technical information & data should representative or typical and should not be for inspection purposes. CarrierPrinting paper 40g/m 2 Adhesive color Natural Appearance colorBL=Black RE=Red AdhesiveWater soluble acrylic Release liner Silicone coated white paper (with PE) RepulpabilityCarrier=Yes, Liner=No Total thickness80 ± 5microns Adhesion (180 ⁰ peel 300mm/min) 1,000 ± 5%gf/25mm 9.8 ± 5%N/25mm Heat resistance 200 ⁰ C Elongation at breakCross 10% Tensile strength85±5N/25mm www.daesatapes.com.vn

Characteristics Water soluble, single coated tape with silicone coated release liner  Features Thin (total: 120microns) Excellent repulpability High cohessive strength Available die-cut Applications General purpose and ideal for butt splices Lost lap tabbing End tabbing and edge protection All hole patching Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties CarrierKraft paper 70g/m 2 Adhesive color Natural Appearance color White AdhesiveWater soluble acrylic Release liner Silicone coated white paper (with PE) RepulpabilityCarrier=Yes, Liner=No Total thickness120 ± 5microns Adhesion (180 ⁰ peel 300mm/min) 1,000 ± 5%gf/25mm 9.8 ± 5%N/25mm Heat resistance 200 ⁰ C Elongation at breakCross 10% Tensile strength85±5N/25mm www.daesatapes.com.vn

Characteristics Water soluble, single coated tape with silicone coated release liner  Features Thin (total: 100microns) Excellent repulpability High temperature heat resistance Applications General purpose End tabbing & edge protection Overlap splicing Excellent for all types of manual splices where a thinner product is preferred Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties  Above technical information & data should representative or typical and should not be for inspection purposes. CarrierKraft paper 40g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=white AdhesiveWater soluble acrylic Release liner Silicone coated white paper (with PE) RepulpabilityCarrier=Yes, Liner=No Total thickness100 ± 5microns Adhesion (180 ⁰ peel 300mm/min) 1,100 ± 5%gf/25mm 10 ± 5%N/25mm Heat resistance 200 ⁰ C Elongation at breakCross 10% Tensile strength85±5N/25mm www.daesatapes.com.vn

Characteristics Water soluble, single coated tape with out release liner  Features Thin (total: 80microns) Excellent repulpability High temperature heat resistance Applications General purpose End tabbing & edge protection Overlap splicing Excellent for all types of manual splices where a thinner product is preferred Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties  Above technical information & data should representative or typical and should not be for inspection purposes. BackingKraft paper 40g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=white AdhesiveWater soluble acrylic Release liner Repulpable Silicone coated whi te paper RepulpabilityYes Total thickness80 ± 5microns Adhesion (180 ⁰ peel 300mm/min) 1,200 ± 5%gf/25mm 11.7 ± 5%N/25mm Heat resistance 200 ⁰ C Elongation at breakCross 15% Tensile strength150±5N/25mm www.daesatapes.com.vn

Characteristics Water soluble, single coated tape with out release liner  Features Thin (total: 100microns) Excellent repulpability High temperature heat resistance Applications General purpose End tabbing & edge protection Overlap splicing Excellent for all types of manual splices where a thinner product is preferred Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties  Above technical information & data should representative or typical and should not be for inspection purposes. BackingKraft paper 40g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=white AdhesiveWater soluble acrylic Release liner Repulpable Silicone coated whi te paper RepulpabilityYes Total thickness100 ± 5microns Adhesion (180 ⁰ peel 300mm/min) 1,350 ± 5%gf/25mm 13 ± 5%N/25mm Heat resistance 200 ⁰ C Elongation at breakCross 15% Tensile strength150±5N/25mm

Characteristics Water soluble, single coated tape with out release liner  Features Thin (total: 170microns) Excellent repulpability High temperature heat resistance Applications General purpose End tabbing & edge protection Overlap splicing Excellent for all types of manual splices where a thinner product is preferred Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties  Above technical information & data should representative or typical and should not be for inspection purposes. BackingKraft brown paper 80g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=white AdhesiveWater soluble acrylic Release liner Repulpable Silicone coated whi te paper RepulpabilityYes Total thickness170 ± 5microns Adhesion (180 ⁰ peel 300mm/min) 1,500 ± 5%gf/25mm 14.7 ± 5%N/25mm Heat resistance 200 ⁰ C Elongation at breakCross 15% Tensile strength175±5N/25mm www.daesatapes.com.vn

Characteristics Water soluble double coated tape without carrier with release liner  Features Thin (total: 50microns) High heat resistance High adhesion Applications For newsprint For printable paper For Flying thin paper For end- tabbing Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierNon (Transfer) Adhesive colorNatural Appearance colorWhite AdhesiveWater soluble acrylic Release liner White or Yellow silicone coated paper (with PE) RepulpabilityYes Total thickness50 ± 5microns Adhesion (180 ⁰ peel300mm/min) 650 ± 5%gf/25mm 6± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Thin (total: 50microns) Very high shear strength Excellent repulpability High temperature heat resistance Applications Mainly used for the permanent application which require repulpability & dissociation Suitable for connecting thick paper for finish in the news printing industries & pulp mills Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner silicone coated white paper(with PE) Repulpability Carrier=Yes Liner=No Total thickness50 ± 5microns Adhesion (180 ⁰ peel300mm/min) 650 ± 5%gf/25mm 6± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Thin (total: 50microns) Very high shear strength Excellent repulpability High temperature heat resistance Applications Mainly used for the permanent application which require repulpability & dissociation Suitable for connecting thick paper for finish in the news printing industries & pulp mills Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner Repulpable silicone coated w hite paper(with PE) Repulpability Carrier=Yes Liner=Yes Total thickness50 ± 5microns Adhesion (180 ⁰ peel300mm/min) 650 ± 5%gf/25mm 6± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Thin (total: 60microns) Very high shear strength Excellent repulpability High temperature heat resistance Applications Mainly used for the permanent application which require repulpability & dissociation Suitable for connecting thick paper for finish in the news printing industries & pulp mills Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner silicone coated white paper(with PE) Repulpability Carrier=Yes Liner=No Total thickness60 ± 5microns Adhesion (180 ⁰ peel300mm/min) 920 ± 5%gf/25mm 9± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Thin (total: 60microns) Very high shear strength Excellent repulpability High temperature heat resistance Applications Mainly used for the permanent application which require repulpability & dissociation Suitable for connecting thick paper for finish in the news printing industries & pulp mills Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner Repulpable silicone coated white paper Repulpability Carrier=Yes Liner=Yes Total thickness60 ± 5microns Adhesion (180 ⁰ peel300mm/min) 920 ± 5%gf/25mm 9± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Very high adhesion Excellent repulpability High temperature heat resistance Splice will not slip even under High temperature No bleeding Applications Manual/ flying splicing Last lap tabbing Paper grades best used for tissue & coated paper Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner silicone coated white paper(with PE) RepulpabilityCarrier=Yes Liner=No Total thickness90± 5microns Adhesion (180 ⁰ peel 300mm/min) Heat resistance Open 680± 5%gf/25mm 6.6± 5%N/25mm Close 820± 5%gf/25mm 8± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Very high adhesion Excellent repulpability High temperature heat resistance Splice will not slip even under High temperature No bleeding Applications Manual/ flying splicing Last lap tabbing Paper grades best used for tissue & coated paper Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner Repulpable silicone coated white paper RepulpabilityCarrier=Yes Liner=Yes Total thickness90± 5microns Adhesion (180 ⁰ peel 300mm/min) Heat resistance Open 680± 5%gf/25mm 6.6± 5%N/25mm Close 820± 5%gf/25mm 8± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Very high adhesion Excellent repulpability High temperature heat resistance Splice will not slip even under high temperature Applications Manual/ Flying splicing Paper grades best used for tissue, carbonless, high gloss & others Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner silicone coated white paper(with PE) Repulpability Carrier=Yes Liner=No Total thickness100 ± 5microns Adhesion (180 ⁰ peel300mm/min) 980 ± 5%gf/25mm 9.6± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Very high adhesion Excellent repulpability High temperature heat resistance Splice will not slip even under high temperature Applications Manual/ Flying splicing Paper grades best used for tissue, carbonless, high gloss & others Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner Repulpable silicone coated white paper RepulpabilityCarrier=Yes Liner=Yes Total thickness100 ± 5microns Adhesion (180 ⁰ peel300mm/min) 980 ± 5%gf/25mm 9.6± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Very high adhesion Excellent repulpability High temperature heat resistance Splice will not slip even under High temperature Applications Manual/ flying splicing Paper grades best used for tissue, carbonless, coated paper, newsprint, high gloss & others Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner silicone coated white paper(with PE) RepulpabilityCarrier=Yes Liner=No Total thickness110± 5microns Adhesion (180 ⁰ peel 300mm/min) Heat resistance Open 820± 5%gf/25mm 8± 5%N/25mm Close 980± 5%gf/25mm 9.6± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Very high adhesion Excellent repulpability High temperature heat resistance Splice will not slip even under High temperature Applications Manual/ flying splicing Paper grades best used for tissue, carbonless, coated paper, newsprint, high gloss & others Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner Repulpable silicone coated white paper RepulpabilityCarrier=Yes Liner=Yes Total thickness110± 5microns Adhesion (180 ⁰ peel 300mm/min) Heat resistance Open 820± 5%gf/25mm 8± 5%N/25mm Close 980± 5%gf/25mm 9.6± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Very high adhesion Excellent repulpability High temperature heat resistance Splice will not slip even under High temperature Applications Manual/ flying splicing Paper grades best used for tissue, carbonless, coated paper, newsprint, high gloss & others Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner silicone coated white paper(with PE) RepulpabilityCarrier=Yes Liner=No Total thickness120± 5microns Adhesion (180 ⁰ peel 300mm/min) Heat resistance Open 760± 5%gf/25mm 7± 5%N/25mm Close 1,020± 5%gf/25mm 10± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Characteristics Water soluble double coated tape  Features Very high adhesion Excellent repulpability High temperature heat resistance Splice will not slip even under High temperature Applications Manual/ flying splicing Paper grades best used for tissue, carbonless, coated paper, newsprint, high gloss & others Storage The tape can be stored for up to 6 months in its original packing.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierTissue paper 13g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner Repulpable silicone coated white paper RepulpabilityCarrier=Yes Liner=Yes Total thickness120± 5microns Adhesion (180 ⁰ peel 300mm/min) Heat resistance Open 760± 5%gf/25mm 7± 5%N/25mm Close 1,020± 5%gf/25mm 10± 5%N/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Specific characteristics Repulpable tape with a splitable paper carrier, coated on both sides with synthetic resin, water soluble adhesive, It is coupled with a Blue stiff bi-siliconized easy release liner.  Features Good instant adhesion and bonding strength Excellent repulpability High temperature resistance Splice will not slip even under high temperatures Applications Recommended for core starting and reels closure. Storage The tape can be stored for up to 6 months in its original packing. Benefits Offers excellent properties for many core starting applications and roll closure. This tape is designed to delaminate at the end of the unwind process without pulling fibers from the core.  Construction  Product properties Above technical information & data should representative or typical and should not be for inspection purposes. CarrierSpecial thin paper 40g/m 2 Adhesive colorB=Blue N=Natural Appearance colorB=Blue N=White AdhesiveWater soluble acrylic Release liner Blue glassine silicone Coated paper RepulpabilityCarrier=Yes Liner=Yes Total thickness120 ± 5microns Adhesion (180 ⁰ peel300mm/min) 1,000 ± 5g/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

DAESAN FAST S[PLICE www.daesatapes.com.vn

Description & Applications DS950FS is a repulpable tape for flying splice applications, especially in newsprint & paper mills. It is very convenient and cost-effective while splicing paper rolls. Experimentally, it has up to 3% higher splice security, up to 200m/min faster splicing speed and 10min less-preparation time comparing with traditional methods. DS950FS can be used for all uncoated and coated paper qualities up to 40-70gsqm  Features Very high tack properties for excellent contact between expiring web and new roll. Two splitting strips with paper backing, which is able to split, for a smooth opening of the new paper reels without jeopardizing the contacting process.  Construction  Product properties High speed splicing Very high tack properties Excellent solubility CarrierThin paper easily repulpable Adhesive colorBlue Appearance colorBlue AdhesiveWater soluble modified acrylic Release liner silicone coated yellow paper(with PE) RepulpabilityCarrier=Yes Liner=No Total thickness100 ± 5microns Adhesion (180 ⁰ peel300mm/min) 970 ± 50g/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Sectional Diagram 33 17 Unit : mm Liner Adhesive Carrier 9  Product Details Width50mm LinerPaper 33mm + 17mm N° Cleavable Strips / Strip Width9mm Standard Length55M Application Condition 40 ~ 70 g / ㎡ Above technical information and data should be representative or typical and should not be used for specification purposes. www.daesatapes.com.vn

Description & Applications DS975FS is a repulpable tape for flying splice applications, especially in newsprint & paper mills. It is very convenient and cost-effective while splicing paper rolls. Experimentally, it has up to 3% higher splice security, up to 200m/min faster splicing speed and 10min less-preparation time comparing with traditional methods. DS975FS can be used for all uncoated and coated paper qualities up to 50-300gsqm  Features Very high tack properties for excellent contact between expiring web and new roll. Two splitting strips with paper backing, which is able to split, for a smooth opening of the new paper reels without jeopardizing the contacting process.  Construction  Product properties High speed splicing Very high tack properties Excellent solubility CarrierThin paper easily repulpable Adhesive colorBlue Appearance colorBlue AdhesiveWater soluble modified acrylic Release liner silicone coated yellow paper(with PE) RepulpabilityCarrier=Yes Liner=No Total thickness100 ± 5microns Adhesion (180 ⁰ peel300mm/min) 970 ± 50g/25mm Heat resistance 200 ⁰ C www.daesatapes.com.vn

Sectional Diagram 50 26 Unit : mm Liner Adhesive Carrier 9 9  Product Details Width76mm LinerPaper 50mm + 26mm N° Cleavable Strips / Strip Width9mm + 9mm Standard Length55M Application Condition 50 ~ 300 g / ㎡ Above technical information and data should be representative or typical and should not be used for specification purposes. www.daesatapes.com.vn

DAESAN CORPORATION CO., LTD. INTRODUCTION Starting new management from October 2003, Daesan Corporation Co., Ltd has reached to produ ce various high.

Similar presentations

Presentation on theme: "DAESAN CORPORATION CO., LTD. INTRODUCTION Starting new management from October 2003, Daesan Corporation Co., Ltd has reached to produ ce various high."— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

DAESAN CORPORATION CO., LTD. INTRODUCTION Starting new management from October 2003, Daesan Corporation Co., Ltd has reached to produ ce various high.

Similar presentations

Presentation on theme: "DAESAN CORPORATION CO., LTD. INTRODUCTION Starting new management from October 2003, Daesan Corporation Co., Ltd has reached to produ ce various high."— Presentation transcript:

Similar presentations

About project

Feedback