Download presentation
Presentation is loading. Please wait.
Published byJacob Charles Modified over 8 years ago
1
1 AIG_AW880W Write IMEI guide Date : 2012.9.11 LONGCHEER CONFIDENTIAL
2
一、 Required SW&HW tools : 1 、 PC 2 、 USB cable 3 、 Write IMEI tools : MTK_SmartPhone_WriteIMEI_V1.2 4 、 The corresponding models of software package 5 、 The corresponding models of driver
3
二、 Operation procedure : 1 、 The first use of mobile phone, need to install the driver, as follows: 1 ) open device manager, figure 1 below 图1图1
4
2 ) USB cable to the mobile phone ( mobile phone equipped with batteries, do not need to boot) connected to the computer, such as a computer installed before driving, it will pop-up ' new hardware ' dialog, manually select the drive path, corresponding mobile phone driver installation. Figure 2: Fig2
5
3 ) With pretend to complete the drive, in the ' device manager ' of the ' port ', can find a new port, such as the Fig3 Fig 3
6
2 、 Write IMEI procedures : 1 ) Open the writing tool, as the 4 fig4
7
2 ) Select NV Database File Click the NV Database file lower right button, select and mobile phone versions of the same software upgrade package in the.SRC file. Figure 5 fig5
8
3 ) Check ' Two IMEI ', can be written in IMEI No. two ( Note: GSM and WCDMA ) each occupying a. Figure 6 fig6
9
4 ) Tool settings Please click on the " config ", enter the system settings. Set password: LCT ( uppercase ). just hook ' IMEI can be re-written ' election. Figure 7 below fig7
10
5 ) Start to write the number Operation steps: 1 use the configuration tool 2 to enter the IMEI number 3 mobile phone equipped with battery ( not boot ) 4 and click the START button, and then use the USB cable to connect the computer 5 wait for completion, suggesting that PASS ( Figure 8 below ) fig8
11
11 End Q&A
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.