1. Final Review Grade 11 Transportation Technology

2. Course Review: Safety and WHMIS Practical Shop Jobs Engine technologies Emissions Turbo chargers and Super chargers Cooling systems Ignitions systems Fuel delivery systems Drive train systems

3. What to expect on the Exam: Multiple Choice Fill in the blank True & False Diagram labeling

4. Sample Multiple Choice: a)Tech A is correct b)Tech B is correct c)Both Techs are wrong d)Both Techs are correct Tech A states that when working in the shop, you must always wear safety glasses. Tech B states that you only need to change the oil of a car once a year.

5. Safety: WHIMS Shop Safety

6. Practical Shop Job tasks: 1. Alternator service 2. Starter motor Service 3. AVR Testing 4. Drive axle and C.V. Joint service 5. Cooling system pressure testing 6. Thermostat testing 7. Automatic transaxle disassembly 8. Engine code scan tool 9. Bore scope tool 10. Valve grinding machine and service tool 11. Rack & pinion steering 12. Strut machine operation 13.Timing belt replacement 14. Wheel bearing with 20 ton press 15. MIG, ARC welding review 16. Trailer circuit wiring 17. Vehicle safety check

7. Engine Systems Four stroke engine cycle- Multiple choice questions related to the purpose, operation and location of various engine parts. Diesel engine- Multiple choice questions related to the purpose, operation and location of various engine parts. Two stroke engine- Multiple choice questions related to the purpose, operation and location of various engine parts. Engine terms- definitions of new terms like turbo lag, firing order, atmospheric pressure, carburetor Purpose Operation Components Terms

8. Engines Engine Requirements Four Strokes Parts of an Engine Engine Terminology General Service

9. Diesel engines

10. Two stroke engine parts Can you label this engine with the proper terminology?

11. Carburation What is a carburetor? Why did we replace this technology?

12. Electronic Fuel injection Part identification Principles of operation Advantages of EFI TBI vs. MPFI

13. GDI engine technology How is it different than traditional fuel injection systems?

14. Engine cooling systems Part identification Principles of operation

15. Emissions systems Part identification Principles of operation

16. Catalytic converter Part identification Principles of operation

17. EGR system Part identification Principles of operation

18. Positive crankcase ventilation Part identification Principles of operation

19. Turbo chargers Part identification Principles of operation

20. Super chargers Part identification Principles of operation

21. Ignition system Part identification Principles of operation

22. Clutches Part identification Principles of operation

23. Air conditioning Part identification Principles of operation

24. Welding processes MIG welding ARC welding Oxy- acetylene welding Can you… State the difference between ARC and MIG processes? Identify the gases used? Describe the shielding gases used?

25. Preparing for the exam Before the exam; Study for small amounts of time- about 20 minute sessions Study multiple days before, not late at night when you are tired Review past tests and diagrams Have a quiet place without distractions- TV, cel phone Get a good night sleep- 8-10 hours Have a good breakfast Come prepared with 2 pens and a good attitude