Presentation is loading. Please wait.

Presentation is loading. Please wait.

1 MICE CM25 Engineering Session Summary Contents: Infrastructure Diffuser Coupling Coils Radiation Shutter AFC module EMR Andy Nichols, STFC, 4-7 th November.

Published byBrianna Cross Modified over 8 years ago

Similar presentations

Presentation on theme: "1 MICE CM25 Engineering Session Summary Contents: Infrastructure Diffuser Coupling Coils Radiation Shutter AFC module EMR Andy Nichols, STFC, 4-7 th November."— Presentation transcript:

1 1 MICE CM25 Engineering Session Summary Contents: Infrastructure Diffuser Coupling Coils Radiation Shutter AFC module EMR Andy Nichols, STFC, 4-7 th November 2009

2 CM25 Engineering Infrastructure: –Air conditioning complete and working –Air system ready –Step II rolling platform installed and tested –CCR cooling water installation started –Electrical work for Step II a priority –Will shortly begin marking out holes in floor for whole cooling channel –‘Domestic’ work in R5.2 complete, handover from BPG mid-Nov –Some more discussion needed on permutations of MICE steps Nothing will be holding up Step II on its present schedule This should be the last CM at which the infrastructure is mentioned! 2

3 CM25 Engineering Diffuser: –It’s assembled and working, with air and control systems –Some development of Pb disc transfer required, plan to do with independent mock-up –Will take nine weeks, on critical path –Some thought still needs to be given to installation details Quench forces Tolerance stack-up Shimming on S/SOL flange? As m/f measurement will be useful Also some idea of the flange’s deflection Essential that we capture this on a proper installation drawing 3

4 CM25 Engineering Radiation Shutter Doors have been made by FNAL Final design drgs of complete installation to be reviewed at December TB He window diameter questioned – CAD exercise required Need to make sure rails have sufficient adjustment range Clarify need for extra tapped holes in S/Sol end plate for shutter rail support with designer Drive mechanism thro’ vacuum is designed Non-magnetic air motor is sourced, but hand operation for now Question: we’re making one set, but we need two. 4

5 CM25 Engineering AFC Modules Manufacturing at TESLA, UK Design mods to accommodate absorber pipes complete and all effects understood Thermal analysis is done and accepted Production of manufacturing drawings has started Regular project meetings with Tesla now established The fact that there is little to mention is good news! 5

6 CM25 Engineering EMR Scintillator planes are well in manufacture and QA at UNIGE Need to go at two planes per week for schedule Magnetic shielding around PMs needs to be understood – Mike C or G. Gregoire maybe can help Design of flex circuits to PMs need to be frozen soon Some minor clashes with R5.2 infrastructure anticipated – exchange of CAD models required Delivery of EMR scheduled for July/August, 2010 6

Download ppt "1 MICE CM25 Engineering Session Summary Contents: Infrastructure Diffuser Coupling Coils Radiation Shutter AFC module EMR Andy Nichols, STFC, 4-7 th November."

Similar presentations

1 UK Project Alan Grant, STFC. Finance How savings are made Update on stepIV position Milestones Critical Path - stepIV Concerns 2.

1 UK Project Alan Grant, STFC. Finance How savings are made Update on stepIV position Milestones Critical Path - stepIV Concerns 2.
MICE RF and Coupling Coil Module Outstanding Issues Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 26, 2004.

MICE RF and Coupling Coil Module Outstanding Issues Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 26, 2004.
1 MICE CM31 Key schedule drivers for Step IV Schedule table Milestone summary Comment on Step V Step VI Andy Nichols, STFC, 3/11/11.

1 MICE CM31 Key schedule drivers for Step IV Schedule table Milestone summary Comment on Step V Step VI Andy Nichols, STFC, 3/11/11.
Status of the AFC at RAL Tom Bradshaw John Cobb Wing Lau Matt Hills Elwyn Baynham Mike Courthold Victoria Bayliss MICE Project Board 28 th June 2011.

Status of the AFC at RAL Tom Bradshaw John Cobb Wing Lau Matt Hills Elwyn Baynham Mike Courthold Victoria Bayliss MICE Project Board 28 th June 2011.
MICE Hall – South Mezzanine Jason Tarrant - STFC l Contents »Device checks with current South Mezzanine »South Mezzanine change summary »Conclusion.

MICE Hall – South Mezzanine Jason Tarrant - STFC l Contents »Device checks with current South Mezzanine »South Mezzanine change summary »Conclusion.
CM30 University of Oxford Engineering session Peter Ford Tim Hayler Eddie Holtom Roy Preece Jason Tarrant Steve Virostek.

CM30 University of Oxford Engineering session Peter Ford Tim Hayler Eddie Holtom Roy Preece Jason Tarrant Steve Virostek.
RF Measurement Plan Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory January 20, 2011 MICE Video Conference Meeting.

RF Measurement Plan Derun Li Center for Beam Physics Lawrence Berkeley National Laboratory January 20, 2011 MICE Video Conference Meeting.
Step IV Infrastructure update STFC Tim Hayler Eddie Holtom Norbert Collomb Graham Stokes 14 th December 2011 MICO170 meeting 1Tim Hayler.

Step IV Infrastructure update STFC Tim Hayler Eddie Holtom Norbert Collomb Graham Stokes 14 th December 2011 MICO170 meeting 1Tim Hayler.
Action Who Progress made status Implement central repository for drawings -- need detector information to add to official drawing WL Progress on-going.

Action Who Progress made status Implement central repository for drawings -- need detector information to add to official drawing WL Progress on-going.
1 MICE PM Report General Update –Phase I civil engineering –R5.2 in June –Phase II design work –Phase II hardware –A few questions –Schedule, milestones.

1 MICE PM Report General Update –Phase I civil engineering –R5.2 in June –Phase II design work –Phase II hardware –A few questions –Schedule, milestones.
MICE Collaboration meeting at CERN March 28 – April 1, 2004 MICE Cooling Channel --- AFC Module work group report Wing Lau – Oxford.

MICE Collaboration meeting at CERN March 28 – April 1, 2004 MICE Cooling Channel --- AFC Module work group report Wing Lau – Oxford.
23 October 2005MICE Meeting at RAL1 MICE Tracker Magnets, 4 K Coolers, and Magnet Coupling during a Quench Michael A. Green Lawrence Berkeley Laboratory.

23 October 2005MICE Meeting at RAL1 MICE Tracker Magnets, 4 K Coolers, and Magnet Coupling during a Quench Michael A. Green Lawrence Berkeley Laboratory.
1 MICE Video Conference Reception of FC magnets Andy Nichols, STFC, 19-1-12.

1 MICE Video Conference Reception of FC magnets Andy Nichols, STFC,
Paul drumm; 1 st December 2004; PM&TB Report 1 Project Management & Technical Board Reports.

Paul drumm; 1 st December 2004; PM&TB Report 1 Project Management & Technical Board Reports.
Global Magnet Systems including Field Mapping MICE Project Board 28 th June 2011 M Courthold – RAL R Preece - RAL.

Global Magnet Systems including Field Mapping MICE Project Board 28 th June 2011 M Courthold – RAL R Preece - RAL.
1 Project Manager Report Andy Nichols, STFC – RAL MICE Collaboration Meeting, Harbin, 13-17th January 2009.

1 Project Manager Report Andy Nichols, STFC – RAL MICE Collaboration Meeting, Harbin, 13-17th January 2009.
1 MICE Radiation Shutter Description Present status Plans, schedule and remaining work MICE CM26, 24-27th March, 2010.

1 MICE Radiation Shutter Description Present status Plans, schedule and remaining work MICE CM26, 24-27th March, 2010.
MICE Collaboration meeting at Berkeley 9 – 12 February 2005 Cooling Channel layout Presented by Stephanie Yang & Wing Lau.

MICE Collaboration meeting at Berkeley 9 – 12 February 2005 Cooling Channel layout Presented by Stephanie Yang & Wing Lau.
Background to the current problem 1. As a result of the high stresses in the bobbin due to the magnet load, the bobbin end plate needs to be increased.

Background to the current problem 1. As a result of the high stresses in the bobbin due to the magnet load, the bobbin end plate needs to be increased.
1 MICE PM Report Installations to date Future installation work Preparations for Phase Two Target status MICE Video Conference, 22nd May, 2008.

1 MICE PM Report Installations to date Future installation work Preparations for Phase Two Target status MICE Video Conference, 22nd May, 2008.

Similar presentations

Ads by Google