Download presentation
Presentation is loading. Please wait.
Published byBenjamin Golden Modified over 8 years ago
1
Aldo Sottolichio, Isabel Jalon Rojas, Sabine Schmidt University of Bordeaux, EPOC, France David Hurther LEGI (Laboratory of Geophysical and Industrial Fluid Flows) Grenoble, France Philippe Laguionie INSA, Rennes, France SPM concentration in a turbid estuary Alain Crave University of Rennes-IRD, France
2
How do we deal with very high SPMC (>5g/l) ?
3
What sensors do you use in monitoring, any other long-term observations and other ship surveys? optical OBS 3A Endress & Hauser TSBD NKE acoustic ADV Nortek (ADCP)
4
Type of observing systems: profiler on ships, poles, mooring stations … Typical deployment time of your systems? from 13h to several months Location of deployments: near-bed, near-channel
5
Jalon Rojas et al, 2015, HESS Long term monitoring
6
Jalon Rojas et al, 2015, HESS
7
Calibration in the laboratory Optical Backscattering Sensor saturation zone (15-30 g.l-1) Calibrated in the range 0,1-300 g.l-1 with natural Gironde mud
8
Argus Surface Meter ASM-IV Total length 1,44m Vertical resolution of 1cm Temporal sampling rate 0,33 Hz Calibration in the laboratory
9
Calibrated in the range 0,4-80 g.l-1 with natural Gironde mud Calibration in the laboratory Argus Surface Meter ASM-IV
10
Acoustic Doppler Velocimeter Vector ADV Calibration in the laboratory Empirical relations for C<5.5 g.-l and for C>5.5 g.l-1 Intensity SNR Calibrated with samples of natural mud
11
STBD NKE Calibration in the laboratory
12
turbidity in NTU
13
inversion with first part inversion with low part turbidité brute marée
14
Experiment 2 (nov 2005) Comparison between C-ASM and C-ADV from water samples
15
Experiment 3 (nov 2005) g/l
16
Experiment 3 (nov 2005) Comparison between C-ASM and C-ADV from water samples
17
Characteristics of the SPM at your locations (concentration, floc/particle size, organic fraction, mineralogy,....)? Organic fraction : 2-10% Floc size : difficult to determine Particle size: only in lab (10 µm)
18
LISST measurements along the estuary (Marchal, 2014)
19
Representiveness of a single point long-term measurement ?
20
Conclusions High SPMC: - imited knowledge on in-situ particle charactetistics (limited instrumentation) -ambiguity of bacscattering signal easy to solve in a vertical profile difficult to solve with one single probe
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.