1. Switching Switch CDP

2. Broadcast and Collision

3. MAC

4. CDP Switch CDP

5. Reality Check

6. NetStep Challenge increases the number of collision domains decreases the number of collision domains implements VLAN decreases the number of broadcast domains uses the IP address to make decisions for forwarding data packets

7. NetStep Resolution increases the number of collision domains decreases the number of collision domains implements VLAN decreases the number of broadcast domains uses the IP address to make decisions for forwarding data packets I AM NOT SAYING …….. I AM JUST SAYING

8. NetStep Challenge A switch does not induce any latency into the frame transfer time A switch tracks MAC addresses of directly-connected devices. A switch operates at a lower, more efficient layer of the OSI model A switch decreases the number of broadcast domains A switch decreases the number of collision domains

9. NetStep Resolution A switch does not induce any latency into the frame transfer time A switch tracks MAC addresses of directly-connected devices A switch operates at a lower, more efficient layer of the OSI model A switch decreases the number of broadcast domains A switch decreases the number of collision domains I AM NOT SAYING …….. I AM JUST SAYING

10. NetStep Challenge HTTP DNSDHCPRARPARP HTTP

11. NetStep Challenge HTTP DNSDHCPRARPARP I AM NOT SAYING …….. I AM JUST SAYING

12. NetStep Challenge Access Core Distribution Layer 3 support Port securityVLANsPoERedundancy

13. NetStep Resolution Access Core Distribution Layer 3 support Port securityVLANsPoERedundancy I AM NOT SAYING …….. I AM JUST SAYING

14. NetStep Challenge There are no collisions in full-duplex mode. A dedicated switch port is required for each full-duplex node. Ethernet hub ports are preconfigured for full-duplex mode. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting. The host network card and the switch port must be capable of operating in full-duplex mode.

15. NetStep Resolution There are no collisions in full-duplex mode. A dedicated switch port is required for each full-duplex node. Ethernet hub ports are preconfigured for full-duplex mode. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting. The host network card and the switch port must be capable of operating in full-duplex mode. I AM NOT SAYING …….. I AM JUST SAYING

16. NetStep Challenge Switch VoIP Phone TCPRTP CDP UDP

17. NetStep Resolution Switch VoIP Phone TCPRTP CDP UDP I AM NOT SAYING …….. I AM JUST SAYING

18. Switching Switch CDP