1.  Bilt2Spec™ Custom walk-ins: Practically any size, shape or option available.

2.  Panels ◦ Foamed-in-place polyurethane ◦ Interior and exterior wall and roof finish 26 ga. acrylic coated stucco galvanized steel ◦ Completely CFC/HCFC free ◦ Standard 4 " thickness with 5 " and 6 " available

3.  Doors ◦ Energy-free/low energy doors - Cooler doors don't require anti- condensate heat and freezer doors only require a low wattage heater in the frame. ◦ Standard V-Series door size: 36 x 78 ◦ Optional widths: 26, 30, 42, 48, 54, 60 ◦ All hinges are spring-loaded and cam-lift for reliable closure ◦ Standard hydraulic hinge closure for added durability ◦ Optional heavy-duty E-Series door available

4.  Doors Section through a typical V-Series door frame ¼-inch thick steel hinge support (at hinge locations only) 10 gauge steel backup for vinyl frame Vinyl frame Raceway containing heater wire in freezer doors

5.  Adjustable Hinge Backing Plate

6.  Non-Slip Flooring (when floor is specified) ◦ NSF-7 approved ◦ Textured.080 aluminum ◦ Textured finish provides increased traction and additional floor strength ◦ Optional heavy-duty floor with plywood reinforcement available ◦ Optional structural floor also available

7.  Master-Bilt provides walk-in coolers and freezers that meet or exceed the prescriptives defined in “LEED 2009 for Retail: New Construction and Major Renovations.”

8.  Quick Ship Walk-Ins ◦ Ships in five business days after order is received; free freight ◦ Coolers, freezers and combo units available ◦ Indoor and outdoor models available ◦ Single compartment & combo units ◦ 36" x 78" V-series door ◦ Must include refrigeration system ◦ Pre-assembled remote M-Series refrigeration systems or PRS-2 packaged systems with standard-duty and heavy- duty options ◦ 4-year extended compressor warranty included

9.  10-Bilt™ Walk-Ins ◦ Ships in 10 business days after order receipt ◦ 4" thick panels ◦ Coolers, freezers and combo units available ◦ Indoor and outdoor models available ◦ Single compartment walk-in widths range from 5'10" to 13'6" (widths of 11'7" and 13'6"recommended for indoor installs only, consult factory for more information) ◦ Unlimited lengths on single compartments ◦ Choice of 26", 30" or 36" wide door ◦ Pre-assembled remote M-Series systems or PRS-2 packaged systems with standard- duty and heavy-duty options

10.  Ready-Bilt™ Walk-Ins ◦ Completely pre-assembled at the factory and ready to set in place at the job site. ◦ The refrigeration system(s) is already installed and the entire walk-in is fully tested before shipping. ◦ Just provide electricity for the single source hook-up (one per refrigeration system). ◦ Each Ready-Bilt walk-in is UL-listed as an entire package, not just for individual components, facilitating electrical inspections.

11. Master-Bilt has long history of providing turnkey refrigerated warehouse projects

12.  Single Compressor

13.  MRS Series Multi-Compressor ◦ Removes heat produced by multiple refrigeration systems and reduces air conditioning load. ◦ Reduces noise level and extends the life of equipment ◦ Because all the refrigeration components are housed in one unit, the system is also easier to service ◦ Single roof penetration point reduces installation costs and chances of roof leakage. ◦ The modular condenser protects against catastrophic failure, should a section of the condenser be damaged it can be replaced without replacing an entire condenser coil.

14.  DRS Series Dual Compressor ◦ Removes heat produced by multiple refrigeration systems and reduces air conditioning load. ◦ Reduces noise level and extends the life of equipment ◦ Because all the refrigeration components are housed in one unit, the system is also easier to service ◦ Single roof penetration point reduces installation costs and chances of roof leakage. ◦ Modular condenser protects against catastrophic failure. Should a section of the condenser be damaged, it can be replaced without replacing an entire condenser coil.

15.  PS Series Parallel Racks ◦ Energy savings of 20% or more over single compressor unit ◦ Wide range of compressors available, including digital scrolls, to better match capacity and budget needs ◦ Add or change compressors as needed ◦ Standard rack housing and frame made of durable galvanized steel with stainless steel as an option ◦ Electronic controller units available

16.  GPS Series Glycol-Cooled Parallel Racks ◦ Use a highly efficient refrigeration system to chill a glycol loop which cools various refrigeration equipment ◦ Utilizes floating heat pressure technology to lower the energy consumption of the refrigeration system by as much as 25%. ◦ Full digital controls provide greater precision, diagnostics, data logging and monitoring capability

17.  Master Controller Reverse Cycle Defrost option provides up to 27% energy savings  2-4% additional savings through new optional evaporator fan cycling