1. T EXAS A & M U NIVERSITY Mechanical Engineering (M.S): Master of Science in Mechanical Engineering

2. 2 Mechanical Engineering Department Administration Andreas A. Polycarpou Department Head Meinhard J. Kotzebue ’14/Professor Office: 100 MEOB Email: apolycarpou@tamu.edu Arun Srinivasa Associate Department Head Holdredge/Paul Professor Office: 505 & 202 MEOB Email: asrinivasa@tamu.edu M ECHANICAL E NGINEERING

3. 3 Mechanical Engineering Department Graduate Program Office Dr. Daniel McAdams Graduate Director/Professor Office: 212 & 411 MEOB Email: dmcadams@tamu.edudmcadams@tamu.edu Research: http://gta.tamu.edu/ http://gta.tamu.edu/ Tandilyn Morrel Senior Graduate Advisor II Office: 210 MEOB Email: tmorrel@tamu.edutmorrel@tamu.edu Sandra Havens Graduate Program Coordinator Office: MEOB 211 Email: shavens@tamu.edushavens@tamu.edu M ECHANICAL E NGINEERING

4. 4

5. 5 Graduate Advising Office Questions which can be directed towards this office: –Qualifying Exam Registration/Details –Degree Requirements & Academic Degree Process Forms –Registration (i.e. Dropping or Adding classes, Q-drops) –Transferring & Substitution Coursework –Academic Enrollment Verification Letters –MEEN 681 Seminar Course/Submit make-up for Seminar –Graduate MEEN Facebook Group & LinkedIn Group –Teaching Assistantship/Fellowships & Travel Awards Applications M ECHANICAL E NGINEERING

6. 6 Graduate Mechanical Engineering Degrees 1.Master of Science (MS) (32 credit hrs. with thesis) http://engineering.tamu.edu/mechanical/academics/degre es/graduate/ms http://engineering.tamu.edu/mechanical/academics/degre es/graduate/ms 2.Master of Engineering (MEng) (30 credit hrs. non- thesis) http://engineering.tamu.edu/mechanical/academics/degre es/graduate/meng http://engineering.tamu.edu/mechanical/academics/degre es/graduate/meng 3.Doctor of Philosophy (Ph.D.) (64 credit hrs./96 credit hrs. without a Master’s Degree) http://engineering.tamu.edu/mechanical/academics/degre es/graduate/phd http://engineering.tamu.edu/mechanical/academics/degre es/graduate/phd M ECHANICAL E NGINEERING

7. 7 Master of Science Requirements The Master of Science (M.S.) degree with the thesis option requires a minimum of 32 semester credit hours. http://engineering.tamu.edu/mechanical/academics/degrees/graduate/mshttp://engineering.tamu.edu/mechanical/academics/degrees/graduate/ms 1 With the approval of student’s thesis advisor ²These courses may include up to two MEEN senior (400 level) electives (6 semester credit hours), and up to 4 semester credit hours of MEEN 685, and other graduate courses with the approval of the student's advisory committee and the Graduate Program Director.

8. 8 Master of Science Requirements (cont.) Core and Suggested Mathematics Courses- Required to take 2 of the following designated core courses: MEEN 603– Theory of Elasticity MEEN 607– Polymer Physical Properties, or MEEN 635– Flow and Fracture of Polymeric Solids MEEN 608– Continuum Mechanics MEEN 613– Engineering Dynamics MEEN 615– Advanced Engineering Thermodynamics MEEN 617– Mechanical Vibrations MEEN 621– Fluid Mechanics MEEN 630– Intermediate Heat Transfer MEEN 651– Control System Design MSEN 601– Fundamental Materials Science Engineering Suggested Math Courses: MATH 601MATH 601 – Methods of Applied Mathematics I MATH 603MATH 603 – Methods of Applied Mathematics II STAT 601 – Statistical Analysis MEEN 602– Modeling & Analysis of Mechanical Systems M ECHANICAL E NGINEERING

9. 9 Finding a Permanent Faculty Chair Take classes from faculty of interest Search Faculty Research groups/centers on MEEN website Directly reach out via email/phone/appointment with Faculty Talk to other Current Graduate Students Take Core Course(s) *Graduate students should have a permanent faculty advisor/chair by the end of their first semester. If not, please make appointment with Dr. McAdams, Graduate Program Director. M ECHANICAL E NGINEERING

10. 10 M ECHANICAL E NGINEERING Who should be on my Degree Plan Committee ? 1 Faculty Chair 2 Faculty Committee Members = Total 3 Faculty Chair/Advisor MUST BE from the MEEN department Committee Members: A professor from the student’s area of study A professor from outside the Mechanical Engineering Department

11. 11 How to apply for a research assistant (GAR) position? In order to apply for a RA, a student must contact the professor in their area of interest. The professors handle funding and will be able to inform students about openings for research positions. Visit http://ogs.tamu.edu/funding-information/graduate- assistantships/http://ogs.tamu.edu/funding-information/graduate- assistantships/ M ECHANICAL E NGINEERING

12. 12 What does a research assistant (GAR) do? Research Project usually externally funded (federal, industry) Lab experiments Data reduction/analysis Write reports and papers Attend conferences Write a thesis (MS) or dissertation (PhD) for a degree M ECHANICAL E NGINEERING

13. 13 How to apply for a teaching assistant (GAT) position? About two months prior to a new semester, applications are distributed to all the graduate students through the Mechanical Engineering department newsletter. In order to apply for a TA, complete the application and submit it online through the link provided by the graduate office. Visit for more info: http://ogs.tamu.edu/funding- information/graduate-assistantships/http://ogs.tamu.edu/funding- information/graduate-assistantships/ M ECHANICAL E NGINEERING

14. 14 What does a teaching assistant (GAT) do? Teach Teach lab sections Run experiments Teach discussion sections Grade lab reports Prepare homework solutions Grade homework Hold office hours M ECHANICAL E NGINEERING

15. 15 M ECHANICAL E NGINEERING International Student TA Requirement International students whose native language is not English and who wish to apply for a TA position must fulfill an English Proficiency Certification requirement. The English Proficiency Certification is required before a graduate student is eligible to serve as a TA or in any other position considered to be a teaching position. It is best to meet this proficiency requirement early in a student’s program. Contact the Data & Research Office at (979) 845-0532, to arrange a test. Email testing@tamu.edutesting@tamu.edu Visit http://www.dars.tamu.edu for more informationhttp://www.dars.tamu.edu

16. 16 Performance Review for TA & RA As a TA or RA, you must perform your duties satisfactorily. Your supervisor or thesis/dissertation advisor will review your performance regularly and report poor performance in writing to the graduate program office, which will inform you of the poor performance reviews and will discuss with you on ways to improve. If you do not improve after two of these poor performance reviews during a semester, and there is a third poor performance review, you may not continue as a TA or RA. M ECHANICAL E NGINEERING

17. 17 Continuation of Teaching Assistant Appointment For you to continue to be a TA, you must: 1.Perform your duties satisfactorily 1.Maintain an overall grade point average of 3.0 or above for all of the courses you take 2.Pass all of the English Language Proficiency Exams (ELP Exams) before the end of the Fall 2015 semester (if you are an international student). You should attempt to obtain an RA from one of the professors so that you may begin your thesis/dissertation research and complete your graduate study as soon as possible. M ECHANICAL E NGINEERING

18. 18

19. 19

20. 20

21. 21

22. 22 Registration Full-time Status: 3 classes (9 semester credit hours) is considered full-time during the Fall & Spring semesters and 6 credit hours in the summer (if applicable). You may register for your classes online through your HOWDY portal. Your degree plan must be approved by your Faculty Chair, the Graduate Advising office, and the Office of Graduate & Professional Studies M ECHANICAL E NGINEERING

23. 23

24. 24

25. 25 MECHANICAL ENGINEERING Student forms Fulfill degree requirements Submit a degree plan (https://ogsdpss.tamu.edu/)https://ogsdpss.tamu.edu/ Submit Petitions (https://ogsdpss.tamu.edu/)https://ogsdpss.tamu.edu/ Get involved on campus Prepare thesis or dissertation Address an academic concern regarding policy, process, or regulation Meet requirements/deadlines for graduation Fellowships and grants Professional development workshops Records processing & degree progress information Confidential advice and problem solving Thesis preparation support Graduate Catalogs Office of Graduate and Professional Studies http://ogs.tamu.edu http://ogs.tamu.edu Want to know how to…..

26. 26

27. 27

28. 28

29. 29 Degree Plan Document Processing Submission System You must submit your degree plan online through: https://ogsdpss.tamu.edu/ https://ogsdpss.tamu.edu/ You have two semesters from the time you’re admitted to do so. Otherwise, you will be blocked from registration for classes. If you wish to make changes to your degree plan Submit MDD petition (Change of major, degree, or department) Submit Long form petition (Change of courses, committee members, waivers etc.) These forms must be completed and approved online. M ECHNICAL E NGINEERING

30. 30

31. 31

32. 32

33. 33 Office Graduate Studies Deadlines All students should be aware of the various deadlines published on the Office of Graduate Studies calendars http://ogs.tamu.edu/current-students/dates-and-deadlines/ You are responsible for meeting these deadlines so that you may complete your degree in a timely fashion! This means you must turn in your forms to the Graduate Advising Office BEFORE the OGAPS deadline for processing time! M ECHANICAL E NGINEERING

34. 34 Payment of Tuition and Fees Pay the balance of your tuition and fees before the payment deadline. Estimated Cost of Attendance 2016-2017 College Station Graduate Fall and Spring: http://financialaid.tamu.edu/Graduate/Cost-of-Attendance#0-CollegeStationGraduateStudents Tuition and fees dates and deadlines are posted on the Student Business Service’s website at: http://sbs.tamu.edu/resources/important-dates/ Tuition Estimator: (The following will help you estimate your required tuition and fees for the semester.) http://sbs.tamu.edu/accounts-billing/tuition-fees/estimator/http://sbs.tamu.edu/accounts-billing/tuition-fees/estimator/ Information for New Students: http://sbs.tamu.edu/information-for-new-students/http://sbs.tamu.edu/information-for-new-students/ Access your statement through the Howdy Portal and pay online!Howdy Portal M ECHANICAL E NGINEERING

35. 35 M ECHANICAL E NGINEERING Probation Policy Students with an overall GPA less than 3.0 are on Academic Probation. Full-time students who earn individual semester GPAs below 2.00 twice cannot continue in the Mechanical Engineering Graduate degree program. Full-time students who earn individual semester GPAs below 3.00 in two successive semesters (fall or spring) cannot continue in the Mechanical Engineering Graduate degree program. Full-time students who earn a cumulative GPA less than 3.00 will have two following long semesters to raise their GPA above 3.00 to be able to continue the Mechanical Engineering Graduate degree program

36. 36 Cheating and Dishonesty We have a departmental “Zero Tolerance” policy on cheating in graduate courses, including MEEN 691 Research and MEEN 685 Directed Studies (for instance, plagiarism in the preparation of a thesis/dissertation or a report). The Aggie honor code: “An Aggie does not lie, cheat, or steal, or tolerate those who do.” Any student who is caught cheating in a graduate course will receive an F* for the course. A second violation could result in the immediate dismissal of the student from the mechanical engineering graduate program. M ECHANICAL E NGINEERING

37. 37 Questions? M ECHANICAL E NGINEERING