1. TEKLINX PAKISTAN Your Embedded Solution Partner

2. Industrial Instrument: Coupling Decoupling Network. Equipment for EFT/Surge measurements, together with EFT/Surge generator. Specifications: Frequency Range: 1MHz~100MHz Coupling Capacitance: 33nF Damping between the output and the input: >20dB Rated Load: 20A Line voltages: 380V Phase voltage:220V

3. Industrial Instrument: Dry Heat Test Oven This chamber is used for test of heat stress on materials like Poly carbonate, ABS, Nylon etc. It can also be used to simulate the aging effect of electronic accessories. Specifications: Temperature Range: room temperature ~ 80’C Adjust able linear slope for temperature rise Uniform heat flow across the chamber Availability of Main voltage terminals Computer interface Capacity: 4.5 cubic Ft

4. Industrial Instrument: Dust Chamber Dust tests for equiment. Complies with IEC60529 Specification: Complies with IEC60529 Capacity: 10 Cubic Ft.

5. Industrial Instrument: Glow wire Tester Used for testing the material properties on extreme temperature ranges Specification: Temperature Range: Max 1000 ‘C Adjustable contact time Adjustable tension with glow element

6. Industrial Instrument: Impulse Generator Used for simulating the lightening surges. Specification: Max voltage: 10KV Standard 1.2 / 50us wave-form (+/-30%) Adjustable time between the surges Adjustable surge count. Oscilloscope output for impulse wave form viewing.

7. Industrial Instrument: Magnetic Tester For external Origin Magnetic ring coil is used to test the EUT under magnetic field disturbances. Specification: Max Flux: 0.5m Tesla Standard 1000 AT coil

8. Industrial Instrument: Power Frequency Tester This equipment is used for testing the insulation properties of EUT Specification: Max output potential: 10KV (Adjustable) Short circuit protection Program able stress time LCD Based interface / counter / voltage indicator

9. Industrial Instrument: Rain Fall Simulator Rain fall tester is used for simulating the raining scenario for EUT. Its use is to check and verify the sealing of EUT

10. Industrial Instrument: Short Time over Current Tester It is used for checking the EUT under severe short circuit and over load conditions. Specification: Output current range: 1200A / 3000A Time of pulse: 10ms Purely inductive solution