1. 2009 Product Training Olathe Kansas June 2009

2. Drilling Equipment

3. HUSQVARNA DM 330

4. Two Models with 3-Speed gear box for optimum drilling performance through designated core bit range. High speed model – 1” thru 10” Low speed model – 2” thru 14” Integrated Amperage/load Indicator Smart Start Soft Start

5. DM 330 – 3-Speed Gear Selection Convenient 3-Speed gear selection lever. High speed model 1 st 6” to 10” 2 nd 3” to 6” 3 rd 1” to 3” Low speed model 1 st 8” to 14” 2 nd 4” to 8” 3 rd 2” to 4’ Provides better RPM’s through range of bits for increased production and life.

6. DM 330 – 3-Speed Gear Box

7. DM 330 – Water Connection The water hose connection pivots to left or right side to help manage water hose placement. Excellent for water hose management when drilling in corners or near walls.

8. DM 330 – Advanced Electronics Elgard TM Electronic overload protection prevents motor damage and reduces wear Softstart TM ensures a smoother start with less load on the electrical system

9. DM 330 – Advanced Electronics Integrated on/off switch Overload Indicator with five LED lights Eliminates need for switch box and ammeter.

10. DM 330 Smart Start Smartstart TM decreases rpm’s with a push of a button. This reduces bit chatter when starting a new whole.

11. DM 330 – Service and Warranty Program One year warranty and loaner program Loaner will ship within 24 hours

12. 24” Bit Test

14. HUSQVARNA DM 230

15. DM 230 – 3-Speed Gear Selection Convenient 3-Speed gear selection lever Offers optimum rpm for 1”– 6” core bits

16. The water hose and electric cord are parallel, reducing tangles and increasing maneuverability DM 230 – Parallel lines

17. Elgard TM Electronic overload protection prevents motor damage and reduces wear Softstart TM ensures a smoother start with less load on the electrical system DM 230 – Advanced Electronics

18. Ergonomic trigger, handles and padded rear end cap provide increased comfort and reduce operator fatigue DM 230 – Comfortable Operation

19. DM 230 – Service and Warranty Program One year warranty and loaner program Loaner will ship within 24 hours

20. DM 230 Test

21. HUSQVARNA DRILL STANDS

22. Column design eliminates column flex Tiltable column for angle drilling. Threaded ceiling jack for overhead support anchoring HUSQVARNA Small Drill Stands

23. Stronger combination base Self cleaning leveling screws Longer and stronger anchor slot. HUSQVARNA Small Drill Stands

24. Feed handle can be used for most adjustments Integrated level for increased accuracy Carriage lock holds carriage in place when using larger diameter bits HUSQVARNA Small Drill Stands

25. Ergonomic handle standard on all models Wheel kits standard on DS 250 and DMS 240 Two-speed feed carriage standard on DS 250 and DMS 240 HUSQVARNA Small Drill Stands

26. DS 150 Drill Stand Husqvarna DS 150 Drill Stand is perfect for use with the DM 230 Hand Held Core Drill Lightweight Tilt angle up to 60 o

27. DMS 180 Drill Rig Medium bit capacity 6” (150 mm) Length of travel 19” (485 mm) Weight 51 pounds (23.3 kg) Tilt angle up to 60 o

28. DS 250 Drill Stand Bit capacity up to 10” (250 mm) 2-Speed feed carriage Motor Quick- disconnect Length of travel 27” (680 mm) Weight 33 pounds (15 kg) Tilt angle up to 60 o

29. DMS 240 Drill Rig Bit capacity up to 10” (250 mm) 2-Speed drill motor Electronic overload protection 2-Speed feed carriage Length of travel 24” (600 mm) Weight 51 pounds (23.3 kg) Tilt angle up to 60 o