1. Presenting by Yogesh and Babakhan
WIFI, GPRS and push data
Welcome to X990 with
eSSL
Presenting by Yogesh and Babakhan

2. X990 500 dpi Optical Sensor 2.8’’ TFT Screen Function Keys Arrow keys
eSSL
Arrow keys
Keypad
X990

3. Technical specification
X990
Technical specification
Users – 3,000Fingerprints/Cards
Transaction – 1,00,000 Logs
CPU – 32 Bit High End Microprocessor
Sensor – 500 dpi Optical Sensor/ Secugen Sensor (Optional)
Identification Speed - <=0.5 Sec.
FAR - <=0.0001%
FRR - <=1%
Card Reader – Inbuilt Proxi. Card Reader
Access Control – 50 Time Zones, 5 Groups, 10 Time Combination
Wiegand I/O – 26 Bit
Communication – RS485, TCP/IP
USB – Host & Client 2.0 Port
Power – 12V DC, 1.5 A
Optional Function – Web Server, GPRS, WIFI, Antipass, Mifare/HID Card Reader/HID Proxy/Battery
eSSL

4. X990 Menu Options Main Menu 1) User Management
The fingerprint machine is in accessible state, Press key to open the Main Menu.
eSSL
1) User Management
For a fingerprint machine, user's basic information includes fingerprint, password and management privilege. Fingerprint machine provide function to add, delete, change the user.

5. X990 Menu Options Add new user:
Firstly register the personnel’s fingerprint or the password on the machine Whose time & attendance record will be tracked.
eSSL
Follow the equipment prompt place the finger, you must continuously press the same finger 3 times in the correct method until the registration success prompt appear.

6. X990
Menu Options
Following the equipment prompt, input the password, then press OK key and input password once again, only can input max. 8 digit the effective figure for the password.
b) Manage:
Here you can view all users' information in the current equipment is available, which include username, the number of fingerprint, whether the password is registered, and user’s attendance logs. You are allowed to edit or delete some users.
eSSL

7. X990
Menu Options
Here we can delete/edit/search for the registered users
eSSL
c) SMS:
Examine the public short message when the equipment is at the readiness status, the main interface show the picture and the current effective content of the public short message.

8. X990 Menu Options d) work codes: e) Access Control setting:
Track Time & Attendance record is basis to compute the salary, the staff has possibly assign to the different working category, also has the possibility to assign different type of work in one factory in the different time.
eSSL
e) Access Control setting:
Access Control settings are designed for user’s Time Period and control unlocks.
if Registered users are unable to unlock, reason is current unlock time should be within any effective Time Scope of the User.

9. X990 Menu Options 2) Communication setting Configure networks:
when transfer the data between the equipment and PC, it is necessary to set the equipment communication parameter. When the equipment and the machine are in the communication, Message will display on the Software “Device connected successfully”.
eSSL
Configure networks:
Machine IP address: Default IP is , you may change, modify it;
Do not set IP as same as the IP of PC. We can not assign IP address in device through DHCP.

10. X990 Menu Options f) Wiegand: 3) System Setting
Pulse interval: which is default 900 microseconds, can be adjusted between the
200 and
Output: Wiegand output signals contained in the content choose to include workers, or card number.
eSSL
3) System Setting
To set up system parameter, make the equipment at the function, display with the perfect exhibition, pursue user's satisfactions.

11. X990 Menu Options b) Data: d) Keyboard:
Delete attendance record: Deletes all attendance record. Delete all registrations personnel information, the fingerprint and the attendance record.
eSSL
d) Keyboard:
When press any condition
key on initial interface left, the attendance
condition which correspond the condition key will appear under the screen left, provide user with the convenient to examine.

12. X990 Menu Options e) Display: f) Reset:
After the user verifying operation, the clock style of your choice will display on the verification screen here, regardless of the success or failure.
eSSL
f) Reset:
Restore the communications setting,
system settings, to the factory settings.

13. X990 Advanced Features GPRS (General Packet Radio Service) WIFI
Push Data
eSSL

14. X990 GPRS (General Packet Radio Service)
Through the GPRS we can access our device from any part of the world.
For configure GPRS we will need a GPRS activated SIM card.
X990 device must be enable with GPRS option.
You should know the APN no. and Dial no. of your service provider. Ex. – For Vodafone . APN – www, Dial no - *99***1# , Heart Beat Server : Static ip
Device must be in Service provider’s network area.
One static IP required to use GPRS service.
GPRS tools required for configuring the device.
eSSL

15. X990
GPRS TOOL
eSSL

16. X990
WIFI
WIFI is a wireless network , where we can get authorized access within the range of our WIFI equipments.
X990 device must be enabled with WIFI option .
Device must be in WIFI range.
One WIFI Router is required to install the X990 WIFI device.
WIFI tools required for configure the device.
eSSL

17. X990
WIFI TOOL
eSSL

18. Thank you every one for your valuable time
eSSL