1. VIA / TCU 5th semester workshop A2016 CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A20161 Wall elements

2. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – S20162 Wall elements and roof VIA / TCU 5th semester workshop A2016

3. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A20163 Wooden wall elements combined with heavy internal or external walls VIA / TCU 5th semester workshop A2016

4. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A20164 Wooden elements External walls made out of wood normally consist of a frame with insulation between the studs. Inside with a dpm and a covering consisting of boards. Examples of internal cladding fixed from the factory could be: Wood wool cement boards Plywood Plasterboard Fibergypsum board Hardboard Chipboard Furring for later fixing of boards after erecting the facade elements The choice of boards will depend of different factors.It could be fire-, moisture-, stability-, or sound. VIA / TCU 5th semester workshop A2016

5. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A20165 Placement of external horizontal and vertical cladding VIA / TCU 5th semester workshop A2016

6. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A20166 Flashing on top of the window VIA / TCU 5th semester workshop A2016

7. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A20167 Placement of window sill made out of steel/zinc. VIA / TCU 5th semester workshop A2016

8. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – S20168 Roof elements Wooden element What is a roof element? It is a prefabricated building component with semi finished roof, insulation and finished ceiling. Where is it used? Very often used for industrial-, office-, and dwelling buildings. Wooden roof elements can be used at all roof angles or produced with the slope from the factory. VIA / TCU 5th semester workshop A2016

9. CASE : Multistory Building VIA University CollegeTCU-VIA Workshop – A20169 Roof elements Damp proff membranes Unventilated roof elements is much more sensitive for the moisture condition when building. If a Hygrodiode membran is used as dpm any moisture in the element will be driven to the dpm where it condensates if the sun shines. Remember that the consultants must secure that no moisture will enter into the element while mounting. You must describe to: - Deliver the elements with the first layer of bitumen fixed. -Place a bitumen felt strip following the mounting sequence -During night seal the elements HygrodiodePVC-foil VIA / TCU 5th semester workshop A2016

10. CASE : Multistory Building VIA University CollegeTCU-VIA Workshop – A201610 VIA / TCU 5th semester workshop A2016

11. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201611 VIA / TCU 5th semester workshop A2016

12. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201612 VIA / TCU 5th semester workshop A2016

13. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201613 VIA / TCU 5th semester workshop A2016

14. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201614 VIA / TCU 5th semester workshop A2016

15. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201615 VIA / TCU 5th semester workshop A2016

16. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201616 VIA / TCU 5th semester workshop A2016

17. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201617 VIA / TCU 5th semester workshop A2016

18. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201618 VIA / TCU 5th semester workshop A2016

19. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201619 VIA / TCU 5th semester workshop A2016

20. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201620 VIA / TCU 5th semester workshop A2016

21. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201621 VIA / TCU 5th semester workshop A2016

22. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201622 VIA / TCU 5th semester workshop A2016

23. CASE 3: Multistory Building VIA University CollegeTCU-VIA Workshop – A201623 Concrete Balconies VIA / TCU 5th semester workshop A2016

24. CASE 2: Multistory Building VIA University CollegeTCU-VIA Workshop – S201624