2.  A car Jack  A wrench  A flat surface

3. Put the car into park and apply the parking brake.

4. Get the spare tire, wrench and the jack out from your trunk.

5.  Raise the jack so that it is supporting and not lifting the car.

6.  Take the hub cap off and loosen the nuts of the tire with the wench by turning counter- clockwise.

7.  Lift the tire off the ground and remove the loosened nuts.

8.  Remove the tire and replace it with the new tire, tighten the nuts by hand.

9.  Lower the car without applying the full weight on the tire and tighten the nuts as much as possible.

10.  Lower the car to the ground and remove the jack. Finish tightening the nuts and replace the hub cap

11.  Put the jack, wrench and old tire into the trunk. Your done.