1. How To Resolve Upside Screen Error In Dell Laptop?

2. Replacing the Ram to increase the speed of your laptop is a smart decision. With increased RAM available in your system, it will operate faster. Even advanced software’s totally depends on the system RAM. So if you wish to install RAM in a Dell Laptop, check this presentation, it is purely for you. Hereby you can follow few steps for to replace the RAM..

3. Step 1: First check the minimum and maximum capacity for RAM in your laptop. For that you can go to the manufacturer specification details.

4. Step 2: Check the percentage and type of RAM already installed using a third party RAM checker if necessary.

5. Step 3: Now determine the type of memory to purchase the laptop.

6. Step 4: Next to install the RAM firstly you need to remove the battery. Then locate the memory access door.

7. Step 5: Now unscrew the door and remove the shield. Now remove the memory SODIMMs then the RAM module will pop up, gently take it out.

8. Step 6: Next align the new memory in the slot and gently push it into place at a 45 degree angle.

9. Step 7: Rotate the module downwards and replace the memory access door and screws. Now place the battery and then turn on the laptop.

10. These were the few simple steps to guide you through the RAM installation process. If you face any issue then you can dial dell technical helpline Australia 1-800-894-139 and they will provide you with a quick response.dell technical helpline Australia Original Source :http://dellsupportaustralia.blogarama.com/2016/08/26/how-to- resolve-upside-screen-error-in-dell-laptop/http://dellsupportaustralia.blogarama.com/2016/08/26/how-to- resolve-upside-screen-error-in-dell-laptop