2. Water Systems Ag Mechanics 21.00

3. Pipe Types Galvanized Steel Cast Iron Black Steel Copper

4. Pipe types cont’ PVC PEX

5. Pipe Cap

6. 45 degree pipe elbow

7. 90 degree pipe elbow

8. Pipe nipple

9. Pipe plug

10. Pipe Coupling

11. Pipe reducer

12. Pipe Bushing

13. Pipe stop & waste

14. Pipe tee

15. Pipe union

16. Copper Pipes Requires soldering tools

17. PVC Pipe Requires fewer tools (hacksaw, glue)

18. Cast Iron & Steel Requires pipe wrenches and threaders

19. Fixtures Things that attach to plumbing pipes

20. Nipple A short piece of pipe threaded on each end

21. Couplings Connects two pieces of pipe the same diameter

22. Bushings & Reducers Connect different sizes of pipes

23. Rubber Blanket When temporarily repairing a small leak you may use a ____________with a hose clamp.

24. Pipe Putty ______ ______ is used on threads to prevent leaks.

25. Plastic Pipe Pipe that is light weight, economical, and easy to install.

26. PVC Pipe Requires glue or adhesive

27. Inside & Outside Glue should be applied to what part of the pipe??

28. PVC Pipe Pipe not designed for hot water

29. Washer If a faucet drips, the problem might be a faulty________.

30. Hose Clamps Black plastic pipe is usually connected by using a tapered slide and _________.

31. 15 seconds When gluing PVC pipe it should be allowed to set for ____ seconds.

32. Female end The end of a water hose that attaches to the faucet is the _______(male/female).

33. Male end The other end of the hose is called the ________ end.

34. Hose connector kit If a hose is cut in the middle, you should purchase a _______ _______ ______.

35. Cleaning & replacing Maintaining an irrigation system requires _______ &______ sprinkler heads.

36. Created by Lori Jones 8-2-06 NCSU