1. PowerPoint ® Lecture Slides prepared by Karen Dunbar Kareiva Ivy Tech Community College © Annie Leibovitz/Contact Press Images Chapter 9 Part B Muscles and Muscle Tissue © 2016 Pearson Education, Inc.

2. 9.5 Whole Muscle Contraction Same principles apply to contraction of both single fibers and whole muscles Contraction produces muscle tension, the force exerted on load or object to be moved Contraction may/may not shorten muscle –Isometric contraction: no shortening; muscle tension increases but does not exceed load –Isotonic contraction: muscle shortens because muscle tension exceeds load © 2016 Pearson Education, Inc.

3. 9.5 Whole Muscle Contraction Force and duration of contraction vary in response to stimuli of different frequencies and intensities Each muscle is served by at least one motor nerve –Motor nerve contains axons of up to hundreds of motor neurons –Axons branch into terminals, each of which forms NMJ with single muscle fiber Motor unit is the nerve-muscle functional unit © 2016 Pearson Education, Inc.

4. The Motor Unit Motor unit consists of the motor neuron and all muscle fibers (four to several hundred) it supplies –Smaller the fiber number, the greater the fine control Muscle fibers from a motor unit are spread throughout the whole muscle, so stimulation of a single motor unit causes only weak contraction of entire muscle © 2016 Pearson Education, Inc.

5. Figure 9.10 A motor unit consists of one motor neuron and all the muscle fibers it innervates. © 2016 Pearson Education, Inc. Branching axon to motor unit Axon terminals at neuromuscular junctions Motor unit 2 Motor unit 1 Nerve Motor neuron axon Motor neuron cell body Spinal cord Muscle fibers Axons of motor neurons extend from the spinal cord to the muscle. At the muscle, each axon divides into a number of axon terminals that form neuromuscular junctions with muscle fibers scattered throughout the muscle. Branching axon terminals form neuromuscular junctions, one per muscle fiber (photomicrograph 330  ).

6. The Muscle Twitch Muscle twitch: simplest contraction resulting from a muscle fiber’s response to a single action potential from motor neuron –Muscle fiber contracts quickly, then relaxes Twitch can be observed and recorded as a myogram –Tracing: line recording contraction activity © 2016 Pearson Education, Inc.

7. The Muscle Twitch (cont.) Three phases of muscle twitch –Latent period: events of excitation-contraction coupling No muscle tension seen –Period of contraction: cross bridge formation Tension increases –Period of relaxation: Ca 2+ reentry into SR Tension declines to zero Muscle contracts faster than it relaxes © 2016 Pearson Education, Inc.

8. Figure 9.11a The muscle twitch. Latent period Period of contraction Period of relaxation Single stimulus Percentage of maximum tension 020 40 60 80 100 120 140 Time (ms) Myogram showing the three phases of an isometric twitch © 2016 Pearson Education, Inc.

9. The Muscle Twitch (cont.) Differences in strength and duration of twitches are due to variations in metabolic properties and enzymes between muscles –Example: eye muscles contraction are rapid and brief, whereas larger, fleshy muscles (calf muscles) contract more slowly and hold it longer © 2016 Pearson Education, Inc.

10. Figure 9.11b The muscle twitch. Latent period Extraocular muscle (lateral rectus) Gastrocnemius Soleus 0 40 80 120 160 200 Time (ms) Single stimulus Percentage of maximum tension Comparison of the relative duration of twitch responses of three muscles © 2016 Pearson Education, Inc.

11. Graded Muscle Responses Normal muscle contraction is relatively smooth, and strength varies with needs –A muscle twitch is seen only in lab setting or with neuromuscular problems, but not in normal muscle Graded muscle responses vary strength of contraction for different demands –Required for proper control of skeletal movement Responses are graded by: –Changing frequency of stimulation –Changing strength of stimulation © 2016 Pearson Education, Inc.

12. Graded Muscle Responses (cont.) Muscle response to changes in stimulus frequency –Single stimulus results in single contractile response (i.e., muscle twitch) © 2016 Pearson Education, Inc.

13. Figure 9.12a A muscle’s response to changes in stimulation frequency. Contraction Stimulus Relaxation Maximal tension of a single twitch 100 200300 Time (ms) Tension Single stimulus: single twitch. A single stimulus is delivered. The muscle contracts and relaxes. 0 © 2016 Pearson Education, Inc.

14. Graded Muscle Responses (cont.) Muscle response to changes in stimulus frequency (cont.) –Wave (temporal) summation results if two stimuli are received by a muscle in rapid succession Muscle fibers do not have time to completely relax between stimuli, so twitches increase in force with each stimulus Additional Ca 2+ that is released with second stimulus stimulates more shortening © 2016 Pearson Education, Inc.

15. Graded Muscle Responses (cont.) Muscle response to changes in stimulus frequency (cont.) –Wave (temporal) summation results if two stimuli are received by a muscle in rapid succession (cont.) Produces smooth, continuous contractions that add up (summation) Further increase in stimulus frequency causes muscle to progress to sustained, quivering contraction referred to as unfused (incomplete) tetanus © 2016 Pearson Education, Inc.

16. Figure 9.12b A muscle’s response to changes in stimulation frequency. Partial relaxation Stimuli 100 200 300 Time (ms) Tension Low stimulation frequency: unfused (incomplete) tetanus. If another stimulus is applied before the muscle relaxes completely, then more tension results. This is wave (or temporal) summation and results in unfused (or incomplete) tetanus. 0 © 2016 Pearson Education, Inc.

17. Graded Muscle Responses (cont.) Muscle response to changes in stimulus frequency (cont.) –If stimuli frequency increases, muscle tension reaches maximum Referred to as fused (complete) tetanus because contractions “fuse” into one smooth sustained contraction plateau Prolonged muscle contractions lead to muscle fatigue © 2016 Pearson Education, Inc.

18. Figure 9.12c A muscle’s response to changes in stimulation frequency. Stimuli 100200 300 Time (ms) Tension High stimulation frequency: fused (complete) tetanus. At higher stimulus frequencies, there is no relaxation at all between stimuli. This is fused (complete) tetanus. 0 © 2016 Pearson Education, Inc.

19. Graded Muscle Responses (cont.) Muscle response to changes in stimulus strength –Recruitment (or multiple motor unit summation): stimulus is sent to more muscle fibers, leading to more precise control –Types of stimulus involved in recruitment: Subthreshold stimulus: stimulus not strong enough, so no contractions seen Threshold stimulus: stimulus is strong enough to cause first observable contraction Maximal stimulus: strongest stimulus that increases maximum contractile force –All motor units have been recruited © 2016 Pearson Education, Inc.

20. Figure 9.13 Relationship between stimulus intensity (graph at top) and muscle tension (tracing below). Stimulus strength Stimuli to nerve Stimulus voltage Threshold stimulus Maximal stimulus Proportion of motor units excited Strength of muscle contraction Maximal contraction Time (ms) Tension 1 2 3 4 5 6 7 8 9 10 © 2016 Pearson Education, Inc.

21. Graded Muscle Responses (cont.) Muscle response to changes in stimulus strength (cont.) –Recruitment works on size principle Motor units with smallest muscle fibers are recruited first Motor units with larger and larger fibers are recruited as stimulus intensity increases Largest motor units are activated only for most powerful contractions Motor units in muscle usually contract asynchronously –Some fibers contract while others rest –Helps prevent fatigue © 2016 Pearson Education, Inc.

22. Figure 9.14 The size principle of recruitment. Skeletal muscle fibers Motor unit 1 recruited (small fibers) Motor unit 2 recruited (medium fibers) Motor unit 3 recruited (large fibers) Time Tension © 2016 Pearson Education, Inc.

23. Muscle Tone Constant, slightly contracted state of all muscles Due to spinal reflexes –Groups of motor units are alternately activated in response to input from stretch receptors in muscles Keeps muscles firm, healthy, and ready to respond © 2016 Pearson Education, Inc.

24. Isotonic and Isometric Contractions Isotonic contractions: muscle changes in length and moves load –Isotonic contractions can be either concentric or eccentric: Concentric contractions: muscle shortens and does work –Example: biceps contract to pick up a book Eccentric contractions: muscle lengthens and generates force –Example: laying a book down causes biceps to lengthen while generating a force © 2016 Pearson Education, Inc.

25. Figure 9.15a-1 Isotonic (concentric) and isometric contractions. Isotonic contraction (concentric) On stimulation, muscle develops enough tension (force) to lift the load (weight). Once the resistance is overcome, the muscle shortens, and the tension remains constant for the rest of the contraction. Tendon Muscle contracts (isotonic contraction) Tendon 3 kg © 2016 Pearson Education, Inc.

26. Figure 9.15a-2 Isotonic (concentric) and isometric contractions. Resting length Muscle stimulus Peak tension developed Muscle relaxes Amount of resistance Time (ms) Tension developed (kg) Muscle length (percent of resting length) 8 6 4 2 0 100 90 80 70 Isotonic contraction (concentric) © 2016 Pearson Education, Inc.

27. Isotonic and Isometric Contractions (cont.) Isometric contractions –Load is greater than the maximum tension muscle can generate, so muscle neither shortens nor lengthens © 2016 Pearson Education, Inc.

28. Isotonic and Isometric Contractions (cont.) Electrochemical and mechanical events are same in isotonic or isometric contractions, but results are different –In isotonic contractions, actin filaments shorten and cause movement –In isometric contractions, cross bridges generate force, but actin filaments do not shorten Myosin heads “spin their wheels” on same actin- binding site © 2016 Pearson Education, Inc.

29. Figure 9.15b-1 Isotonic (concentric) and isometric contractions. Isometric contraction Muscle is attached to a weight that exceeds the muscle’s peak tension-developing capabilities. When stimulated, the tension increases to the muscle’s peak tension-developing capability, but the muscle does not shorten. Muscle contracts (isometric contraction) 6 kg © 2016 Pearson Education, Inc.

30. Figure 9.15b-2 Isotonic (concentric) and isometric contractions. Amount of resistance Peak tension developed Muscle relaxes Resting length Muscle stimulus Time (ms) Muscle length (percent of resting length) Tension developed (kg) Isometric contraction 8 6 4 2 0 100 90 80 70 © 2016 Pearson Education, Inc.

31. 9.6 Energy for Contraction and ATP Providing Energy for Contraction ATP supplies the energy needed for the muscle fiber to: –Move and detach cross bridges –Pump calcium back into SR –Pump Na + out of and K + back into cell after excitation-contraction coupling Available stores of ATP depleted in 4–6 seconds ATP is the only source of energy for contractile activities; therefore it must be regenerated quickly © 2016 Pearson Education, Inc.

32. Providing Energy for Contraction ATP is regenerated quickly by three mechanisms: –Direct phosphorylation of ADP by creatine phosphate (CP) –Anaerobic pathway: glycolysis and lactic acid formation –Aerobic respiration © 2016 Pearson Education, Inc.

33. Providing Energy for Contraction (cont.) Direct phosphorylation of ADP by creatine phosphate (CP) –Creatine phosphate is a unique molecule located in muscle fibers that donates a phosphate to ADP to instantly form ATP Creatine kinase is enzyme that carries out transfer of phosphate Muscle fibers have enough ATP and CP reserves to power cell for about 15 seconds Creatine phosphate + ADP  creatine + ATP © 2016 Pearson Education, Inc.

34. Figure 9.16a Pathways for regenerating ATP during muscle activity. Direct phosphorylation Coupled reaction of creatine phosphate (CP) and ADP Energy source: CP CP ADP Creatine kinase Creatine ATP Oxygen use: None Products: 1 ATP per CP, creatine Duration of energy provided: 15 seconds © 2016 Pearson Education, Inc.

35. Providing Energy for Contraction (cont.) Anaerobic pathway: glycolysis and lactic acid formation –ATP can also be generated by breaking down and using energy stored in glucose Glycolysis: first step in glucose breakdown –Does not require oxygen –Glucose is broken into 2 pyruvic acid molecules –2 ATPs are generated for each glucose broken down Low oxygen levels prevent pyruvic acid from entering aerobic respiration phase © 2016 Pearson Education, Inc.

36. Providing Energy for Contraction (cont.) Anaerobic pathway: glycolysis and lactic acid formation (cont.) –Normally, pyruvic acid enters mitochondria to start aerobic respiration phase; however, at high intensity activity, oxygen is not available Bulging muscles compress blood vessels, impairing oxygen delivery –In the absence of oxygen, referred to as anaerobic glycolysis, pyruvic acid is converted to lactic acid © 2016 Pearson Education, Inc.

37. Providing Energy for Contraction (cont.) Anaerobic pathway: glycolysis and lactic acid formation (cont.) –Lactic acid Diffuses into bloodstream Used as fuel by liver, kidneys, and heart Converted back into pyruvic acid or glucose by liver –Anaerobic respiration yields only 5% as much ATP as aerobic respiration, but produces ATP 2½ times faster © 2016 Pearson Education, Inc.

38. Figure 9.16b Pathways for regenerating ATP during muscle activity. Anaerobic pathway Glycolysis and lactic acid formation Energy source: glucose Glucose (from glycogen breakdown or delivered from blood) Glycolysis in cytosol Pyruvic acid Lactic acid ATP net gain Released to blood 2 Oxygen use: None Products: 2 ATP per glucose, lactic acid Duration of energy provided: 30–40 seconds, or slightly more O2O2 O2O2 © 2016 Pearson Education, Inc.

39. Providing Energy for Contraction (cont.) Aerobic respiration –Produces 95% of ATP during rest and light-to- moderate exercise Slower than anaerobic pathway –Consists of series of chemical reactions that occur in mitochondria and require oxygen Breaks glucose into CO 2, H 2 O, and large amount ATP (32 can be produced) –Fuels used include glucose from glycogen stored in muscle fiber, then bloodborne glucose, and free fatty acids Fatty acids are main fuel after 30 minutes of exercise © 2016 Pearson Education, Inc.

40. Figure 9.16c Pathways for regenerating ATP during muscle activity. Aerobic pathway Aerobic cellular respiration Energy source: glucose; pyruvic acid; free fatty acids from adipose tissue; amino acids from protein catabolism Glucose (from glycogen breakdown or delivered from blood) Pyruvic acid Fatty acids Amino acids CO 2 H2OH2O 32 ATP net gain per glucose O2O2 O2O2 Oxygen use: Required Products: 32 ATP per glucose, CO 2, H 2 O Duration of energy provided: Hours © 2016 Pearson Education, Inc.

41. Providing Energy for Contraction (cont.) Energy systems used during sports –Aerobic endurance Length of time muscle contracts using aerobic pathways –Light-to-moderate activity, which can continue for hours –Anaerobic threshold Point at which muscle metabolism converts to anaerobic pathway © 2016 Pearson Education, Inc.

42. Figure 9.17 Comparison of energy sources used during short-duration exercise and prolonged-duration exercise. Short-duration, high-intensity exercise Prolonged-duration exercise 6 seconds 10 seconds 30–40 seconds End of exercise ATP stored in muscles is used first. ATP is formed from creatine phosphate and ADP (direct phosphorylation). Glycogen stored in muscles is broken down to glucose, which is oxidized to generate ATP (anaerobic pathway). Hours ATP is generated by breakdown of several nutrient energy fuels by aerobic pathway. © 2016 Pearson Education, Inc.

43. Muscle Fatigue Physiological inability to contract despite continued stimulation Usually occurs when there are ionic imbalances –Levels of K +, Ca 2+, P i can interfere with E ‑ C coupling –Prolonged exercise may also damage SR and interferes with Ca 2+ regulation and release Lack of ATP is rarely a reason for fatigue, except in severely stressed muscles © 2016 Pearson Education, Inc.

44. Excess Postexercise Oxygen Consumption For a muscle to return to its pre-exercise state: –Oxygen reserves are replenished –Lactic acid is reconverted to pyruvic acid –Glycogen stores are replaced –ATP and creatine phosphate reserves are resynthesized All replenishing steps require extra oxygen, so this is referred to as excess postexercise oxygen consumption (EPOC) –Formerly referred to as “oxygen debt” © 2016 Pearson Education, Inc.