1. Istituto Tecnico Industriale A.Monaco EURLAB Moving a robot connect the wifi-component ESP8266

2. Istituto Tecnico Industriale A.Monaco EURLAB Moving a robot If you want to communicate with your robot over the wireless network, you need a wireless serial adapters, for example, the ESP8255 module. connect the wifi-component ESP8266 http://www.robotshop.com/media/files/images2/superdroid-hd2-robot-wifi- control-camera.jpg

3. Istituto Tecnico Industriale A.Monaco EURLAB Moving a robot To communicate you can take your smartphone. Download following App (for Android): Max Remote (Simulation of Remote Panels) connect the wifi-component ESP8266 http://www.robotshop.com/medi a/files/images2/superdroid-hd2- robot-wifi-control-camera.jpg

4. Istituto Tecnico Industriale A.Monaco EURLAB Moving a robot Progam You need the file „ESP8266_Workshop_v103 Upload this file to the arduino The esp8266Init send you the IP-Adress for the connection with your other device

5. Istituto Tecnico Industriale A.Monaco EURLAB Moving a robot Progam You need the file „ESP8266_Workshop_v101 Before uploading in your arduiono you must set the SSID, Password and the Port like here You need the SSID and password of the access points in your area!

6. Istituto Tecnico Industriale A.Monaco EURLAB Moving a robot Progam If you start this program, you must open the serial-monitor! The Initialisation needs approx. 60 seconds. Afterwards you see the IP-Adress and the port in the window of the serial-monitor. Connect your device with this IP and Port.

7. Istituto Tecnico Industriale A.Monaco EURLAB Moving a robot wirering Map ESP8266 data-lines