1. R6 Marketing Guide Keypad and Proximity Access Controller Metal Shell, IP65&Vandal Resistant

2. Introduction R6 R6 is a keypad and proximity card access controller operated in standalone mode. It has interfaces to connect with electric lock, door sensor, exit button and doorbell, which would compose of a simple access control system.

3. Profile

4. Features  Hardware  Hardware: Metal Housing Anti-vandal IP65 rated waterproof and dustproof Durable Keypad Metal key buttons, white backlit for use in darkness LED Lamp and Buzzer beeps indicates operation status

5. Specification

6. Configuration

7. Operation Guide User ManagementKeypad InputInstruction Admin Password 1~4 digits (default 1234) *#→PW (press # if PW length < 4 digit) To enter into the system setting mode 8 To change the admin password 0→0 To open the door Admin PW was lost? Reset by press the optical tamper switch three times once a beep is generated (30~60s) after reboot the device (each press shall take 2~5 seconds and it has a beep each time, the red LED blink if the operation is successful) Add Users 1 Individually registration for card 6 Batch registration for cards(cards No. and user ID in series ) Delete Users 2 Delete user individually 9→99→9 Delete all users 8 Groups Password 3→1~8 (Group No.) → 4 digits password accordingly ( input PW two times to confirm) Verification by Password: input password and press # to confirm during verification state (green LED blink once every second) *#: System Setting*: Quit#: Confirm

8. Operation Guide Access Control ManagementKeypad InputInstructionDefault Unlocking Duration 4 1~254s5s Authentication Mode 5 1 PW only 2 RF only 3 PW/RF 4 PW&RF PW/RF Concealed Mode 0→30→3 Enable: 0 Disable: 1 Disable Door Sensor 0→50→5 NO: 0 NC:1 None: 2 None Alarm ON/OFF 0→10→1 Enable: 0 Disable: 1 Enable: Door Sensor Delay Alarm 0→4 1~254s15s Error Operation Alarm 0→2 Enable: 0 Disable: 1 Enable Tamper Alarm 7 Enable: 0 Disable: 1 Enable Restore to Factory Setting 0→9→9

9. Packing Information R6 Terminal Metallic Mounting Plate Screws and Holders Star-shape Screw DriverID Thin Card (1pc) ItemSizeWeight R6 Device 5.2*11.8*2.4cm0.32kg Boxed R6 **CMKG pcs/Carton Per Carton Size: **CM Per Carton Weight: KG Documents

10. Optional Accessories AccessoriesItemPicture 125KHz Cards Thin Card/Thick Card/Key Fobs Power Supply PS901B: 12V/3A with Battery Leads PS902B: 12V/5A with Battery Leads PS901: 12V/3A without Battery Leads PS902: 12V/5A without Battery Leads Electric Lock Magnetic Lock and Brackets Electric Bolt and Brackets Request to exit K1-1: Non Touch Exit Button Alarm or Siren AS603: Piezo Strobe Siren Door Sensor Select if the lock doesn’t equip with