Presentation is loading. Please wait.

Presentation is loading. Please wait.

The essentials of building wireless networks Sebastian Büttrich, NSRC edit: xxxx 2010

Similar presentations


Presentation on theme: "The essentials of building wireless networks Sebastian Büttrich, NSRC edit: xxxx 2010"— Presentation transcript:

1 The essentials of building wireless networks Sebastian Büttrich, NSRC edit: xxxx 2010 http://creativecommons.org/licenses/by-nc-sa/3.0/

2 Essential elements Radio physics Site survey IP Planning (subnet!subnet!subnet!) Link budget Antennas … (sectorize!sectorize!sectorize!) Layer thinking

3 Site Survey No matter what network you are building, core infrastructure or edge access, a site survey is mandatory Results of the site survey are the basis for your technology and process decisions

4 Site Survey A site survey includes – Spectrum Analysis, wireless scan – check for conflicts and interference – Power/Electricity conditions – Wired network conditions – Environmental conditions – Social / human factors … who are my neighbours? – Documentation of everything!

5 Site Survey think holistic! networking is more than ping!

6 Link Budget A link budget is mandatory for all long links – point to point, point to multipoint Not relevant for a “hotspot” A link budget is simply adding up all gains and losses (in dB!) and telling you if what you have in the end is enough for a working link

7 Link Budget Radio output TX Radio sensitivity RX Cables on both sides Antennas on both sides And a lot of Free space.... FSL [dB]= C + 20 * Log(D) + 20 * Log(F) D distance, and F frequency [MHz]. C = 36.6 if D [miles] / 32.5 if D [kilometers] (Hopefully no) amplifiers

8 Complete link budget – ex. 1 Transmit output+ 015 dBm Cable + Connectors- 003 dB Antenna TX+ 024 dBi FSL (50 km / 31.1 miles at 2.4 Ghz) - 134 dB Antenna RX+ 024 dBi Cable + Connectors- 003 dB Receive Sensitivity- 085 dBm (subtract!) ------------------------------------------------------------------------ TOTAL+ 008 dB margin

9 Complete link budget – ex. 1

10 Complete link budget – ex. 2 Transmit output+ 018 dBm Cable + Connectors- 005 dB (low quality cabling) Antenna TX+ 005 dBi (an omni) FSL (1 km / 0.622 miles at 2.4 Ghz) - 100 dB Antenna RX+ 008 dBi (patch antenna Cable + Connectors- 005 dB (bad again :) Receive Sensitivity- 092 dBm (subtract!) ------------------------------------------------------------------------ TOTAL+ 13 dB margin

11 Complete link budget – ex. 2

12 Antennas!

13 Layers!

14 That was it... Thank you! sebastian@less.dk http://wire.less.dk Sebastian Büttrich, wire.less.dk edit: March 2010 http://creativecommons.org/licenses/by-nc-sa/3.0/


Download ppt "The essentials of building wireless networks Sebastian Büttrich, NSRC edit: xxxx 2010"

Similar presentations


Ads by Google