2. 1 Properties of Solutions

3. 2 Solutions Why does a raw egg swell or shrink when placed in different solutions?

4. 3 Classification of Matter Solutions Solutions are homogeneous mixtures

5. 4 Some Definitions A solution is a _______________ mixture of 2 or more substances in a single phase. One constituent is usually regarded as the SOLVENT and the others as SOLUTES.

6. 5 Parts of a Solution SOLUTE – the part of a solution that is being dissolved (usually the lesser amount) SOLVENT – the part of a solution that dissolves the solute (usually the greater amount) Solute + Solvent = Solution SoluteSolventExample solid liquid gassolid liquid gasliquid gas

7. 6 What determines whether or not a solution will form and to what extent?

8. 7 “Like Dissolves Like” Fats Fats Benzene Benzene Steroids Steroids Hexane Hexane Waxes Waxes Toluene Toluene Polar and ionic solutes dissolve best in polar solvents Nonpolar solutes dissolve best in nonpolar solvents Inorganic Salts Water Water Sugars Sugars Small alcohols Small alcohols Acetic acid Acetic acid

9. 8 How fast will a substance dissolve? 1.Stirring 2.Temperature 3.Particle size (small size particles, more surface area exposed) **Dissolving is a surface phenomenon**

10. 9 Solubility-amount of solute per given amount of solvent at an given temperaterue and pressure. (g solute/100g solvent) Solutions can be classified as saturated or unsaturated. A saturated solution contains the maximum quantity of solute that dissolves at that temperature. An unsaturated solution contains less than the maximum amount of solute that can dissolve at a particular temperature

11. 10 Example: Saturated and Unsaturated Fats Unsaturated fats have at least one double bond between carbon atoms; monounsaturated means there is one double bond, polysaturated means there are more than one double bond. Thus, there are some bonds that can be broken, chemically changed, and used for a variety of purposes. These are REQUIRED to carry out many functions in the body. Fish oils (fats) are usually unsaturated. Game animals (chicken, deer) are usually less saturated, but not as much as fish. Olive and canola oil are monounsaturated. Saturated fats are called saturated because all of the bonds between the carbon atoms in a fat are single bonds. Thus, all the bonds on the carbon are occupied or “saturated” with hydrogen. These are stable and hard to decompose. The body can only use these for energy, and so the excess is stored. Thus, these should be avoided in diets. These are usually obtained from sheep and cattle fats. Butter and coconut oil are mostly saturated fats.

12. 11 Definitions SUPERSATURATED SOLUTIONS contain more solute than is possible to be dissolved Supersaturated solutions are unstable. The supersaturation is only temporary, and usually accomplished in one of two ways: 1.Warm the solvent so that it will dissolve more, then cool the solution 2.Evaporate some of the solvent carefully so that the solute does not solidify and come out of solution.

13. 12 Supersaturated Sodium Acetate Supersaturated Sodium Acetate One application of a supersaturated solution is the sodium acetate “heat pack.”One application of a supersaturated solution is the sodium acetate “heat pack.”

14. 13 Factors affecting solubility  Temperature:  The solubility of MOST solids increases with temperature.  The solubility of gases decreases with increases in temperature.  Pressure:  The solubility of gases increases with the pressure above the solution.

15. 14 Solubility Chart

16. 15 Henry’s Law

17. 16 Calculating Solubility: If the solubility of a gas in water is 0.77 g/L at 3.5 atm of pressure, what is its solubility in g/L at 1.0 atm of pressure? (constant temperature of 25  ) Answer: 0.22 g/L

18. 17 HOMEWORK Pg 477 # 3-7 Pg. 499 # 49 Pg. 500 #71, 77, 79

19. 18 Therefore… Solids tend to dissolve best when: o Heated o Stirred o Ground into small particles Gases tend to dissolve best when: o The solution is cold o Pressure is high

20. 19 An electrolyte is: A substance whose aqueous solution conducts an electric current. A nonelectrolyte is: A substance whose aqueous solution does not conduct an electric current. Definition of Electrolytes and Nonelectrolytes

21. 20 IONIC COMPOUNDS Compounds in Aqueous Solution Many reactions involve ionic compounds, especially reactions in water — aqueous solutions. KMnO 4 in water K + (aq) + MnO 4 - (aq)

22. 21 How do we know ions are present in aqueous solutions? The solutions _______________ __________ They are called ELECTROLYTES HCl, MgCl 2, and NaCl are strong electrolytes. They dissociate completely (or nearly so) into ions. Aqueous Solutions

23. 22 Aqueous Solutions Some compounds dissolve in water but do not conduct electricity. They are called nonelectrolytes. Examples include: sugarethanol ethylene glycol Examples include: sugarethanol ethylene glycol

24. 23 It’s Time to Play Everyone’s Favorite Game Show… Electrolyte or Nonelectrolyte!

25. 24 Electrolytes in the Body  Carry messages to and from the brain as electrical signals  Maintain cellular function with the correct concentrations electrolytes Make your own 50-70 g sugar One liter of warm water Pinch of salt 200ml of sugar free fruit squash Mix, cool and drink

26. 25 Suspensions and Colloids

27. 26 Colloids and suspensions are heterogeneous mixtures

28. 27 Suspensions and Colloids Suspensions and colloids are NOT solutions. Suspensions: The particles are so large that they settle out of the solvent if not constantly stirred. Colloids: The particle is intermediate in size between those of a suspension and those of a solution.

29. 28 Smog – A Suspension

30. 29 Types of Colloids Examples Dispersing Medium Dispersed Substance Colloid Type Fog, aerosol spraysGasLiquidAerosol Smoke, airborne bacteriaGasSolidAerosol Whipped cream, soap sudsLiquidGasFoam Milk, mayonnaiseLiquid Emulsion Paint, clays, gelatinLiquidSolidSol Marshmallow, StyrofoamSolidGasSolid foam Butter, cheeseSolidLiquidSolid emulsion Ruby glassSolid Solid sol

31. 30 The Tyndall Effect Colloids scatter light, making a beam visible. Solutions do not scatter light. Which glass contains a colloid? solution colloid

32. 31 Concentration of Solute The amount of solute in a solution is given by its concentration The amount of solute in a solution is given by its concentration. Molarity (M) = moles solute liters of solution

33. 32 1.0 L of water was used to make 1.0 L of solution. Notice the water left over.

34. 33 PROBLEM: Dissolve 5.00 g of NiCl 2 6 H 2 O in enough water to make 250 mL of solution. Calculate the Molarity. Step 1: Calculate moles of NiCl 2 6H 2 O Step 2: Calculate Molarity NiCl 2 6 H 2 O [NiCl 2 6 H 2 O ] = 0.0841 M

35. 34 Step 1: Change mL to L. 250 mL * 1L/1000mL = 0.250 L Step 2: Calculate. Moles = (0.0500 mol/L) (0.250 L) = 0.0125 moles Step 3: Convert moles to grams. (0.0125 mol)(90.00 g/mol) = 1.13 g USING MOLARITY moles = MV What mass of oxalic acid, H 2 C 2 O 4, is required to make 250. mL of a 0.0500 M solution?

36. 35 Learning Check How many grams of NaCl are required to prepare 250. mL of 2.0 M NaCl solution?

37. 36 An IDEAL SOLUTION is one where the properties depend only on the concentration of solute. Need conc. units to tell us the number of solute particles per solvent particle. The unit “molarity” does not do this! Concentration Units

38. 37 Three Other Concentration Units grams solute grams solution MOLALITY, m % by mass = % by mass m of solution= mol solute kilograms solvent % by Volume = % by volume mL solute mL solution

39. 38 Calculating Concentrations Dissolve 62.1 g (1.00 mol) of ethylene glycol in 250. g of H 2 O. Calculate molality and % by mass of ethylene glycol.

40. 39 Calculating Concentrations Calculate molality Dissolve 62.1 g (1.00 mol) of ethylene glycol in 250. g of H 2 O. Calculate m & % of ethylene glycol (by mass). Calculate weight %

41. 40 Learning Check A solution contains 15 g Na 2 CO 3 and 235 g of H 2 O? What is the mass % of the solution? 1) 15% Na 2 CO 3 2) 6.4% Na 2 CO 3 3) 6.0% Na 2 CO 3

42. 41 Using mass % How many grams of NaCl are needed to prepare 250 g of a 10.0% (by mass) NaCl solution? 10% = x/250g 25 g NaCl

43. 42 Try this molality problem 25.0 g of NaCl is dissolved in 5000. mL of water. Find the molality (m) of the resulting solution. m = mol solute / kg solvent 25 g NaCl 1 mol NaCl 58.5 g NaCl = 0.427 mol NaCl Since the density of water is 1 g/mL, 5000 mL = 5000 g, which is 5 kg 0.427 mol NaCl 5 kg water = 0.0854 m salt water

44. 43 Using Volume % What is the percent by volume of ethanol (ethyl alcohol, C 2 H 6 O) in the final solution when 75 mL of ethanol is diluted to a volume of 250 mL with water? % = 75mL 250mL x 100 = 30% ethanol

45. 44 Colligative Properties On adding a solute to a solvent, the properties of the solvent are modified. Vapor pressure decreasesVapor pressure decreases Melting point decreasesMelting point decreases Boiling point increasesBoiling point increases Osmosis is possible (osmotic pressure)Osmosis is possible (osmotic pressure) These changes are called COLLIGATIVE PROPERTIES. They depend only on the NUMBER of solute particles relative to solvent particles, not on the KIND of solute particles.

46. 45 Change in Freezing Point The freezing point of a solution is LOWER than that of the pure solvent Pure water Ethylene glycol/water solution

47. 46 Change in Freezing Point Common Applications of Freezing Point Depression Propylene glycol Ethylene glycol – deadly to small animals

48. 47 Common Applications of Freezing Point Depression Which would you use for the streets of Bloomington to lower the freezing point of ice and why? Would the temperature make any difference in your decision? a)sand, SiO 2 b)Rock salt, NaCl c)Ice Melt, CaCl 2 Change in Freezing Point

49. 48 Change in Boiling Point Common Applications of Boiling Point Elevation

50. 49 Boiling Point Elevation and Freezing Point Depression ∆T = Kmi ∆T = Kmi i = van’t Hoff factor = number of particles produced per molecule/formula unit. For covalent compounds, i = 1. For ionic compounds, i = the number of ions present (both + and -) CompoundTheoretical Value of i glycol1 NaCl2 CaCl 2 3 Ca 3 (PO 4 ) 2 5

51. 50 Boiling Point Elevation and Freezing Point Depression ∆T = Kmi ∆T = Kmi SubstanceKbKb benzene2.53 camphor5.95 carbon tetrachloride5.03 ethyl ether2.02 water0.52 m = molality K = molal freezing point/boiling point constant SubstanceKfKf benzene5.12 camphor40. carbon tetrachloride30. ethyl ether1.79 water1.86

52. 51 Change in Boiling Point Dissolve 62.1 g of glycol (1.00 mol) in 250. g of water. What is the boiling point of the solution? K b = 0.52 o C/molal for water (see K b table). Solution∆T BP = K b m i 1.Calculate solution molality = 4.00 m 2.∆T BP = K b m i ∆T BP = 0.52 o C/molal (4.00 molal) (1) ∆T BP = 0.52 o C/molal (4.00 molal) (1) ∆T BP = 2.08 o C BP = 100 + 2.08 = 102.08 o C (water normally boils at 100)

53. 52 Calculate the Freezing Point of a 4.00 molal glycol/water solution. K f = 1.86 o C/molal (See K f table) Solution ∆T FP = K f m i = (1.86 o C/molal)(4.00 m)(1) = (1.86 o C/molal)(4.00 m)(1) ∆T FP = 7.44 FP = 0 – 7.44 = -7.44 o C (because water normally freezes at 0) Freezing Point Depression

54. 53 At what temperature will a 5.4 molal solution of NaCl freeze? Solution ∆T FP = K f m i ∆T FP = (1.86 o C/molal) 5.4 m 2 ∆T FP = (1.86 o C/molal) 5.4 m 2 ∆T FP = 20.1 o C ∆T FP = 20.1 o C FP = 0 – 20.1 = -20.1 o C FP = 0 – 20.1 = -20.1 o C Freezing Point Depression

55. 54 Preparing Solutions Weigh out a solid solute and dissolve in a given quantity of solvent.Weigh out a solid solute and dissolve in a given quantity of solvent. Dilute a concentrated solution to give one that is less concentrated.Dilute a concentrated solution to give one that is less concentrated.

56. 55 ACID-BASE REACTIONS Titrations H 2 C 2 O 4 (aq) + 2 NaOH(aq) ---> acid base acid base Na 2 C 2 O 4 (aq) + 2 H 2 O(liq) Carry out this reaction using a TITRATION. Oxalic acid, H 2 C 2 O 4

57. 56 Setup for titrating an acid with a base

58. 57 TitrationTitration 1. Add solution from the buret. 2. Reagent (base) reacts with compound (acid) in solution in the flask. 3.Indicator shows when exact stoichiometric reaction has occurred. (Acid = Base) This is called NEUTRALIZATION. This is called NEUTRALIZATION.