1. SERVO TECHNO SYSTEM CO.,LTD DC Ｍｏｔｏｒ ｗｉｔｈ Ｂｒ ｕｓｈ Ｉｎｔｒｏｄｕｃｔｉｏｎ of Ｎ ｅｗ Ｐｒｏｄｕｃｔｓ １．３７．２ dia. Planetary gear head ２．３０ dia. Planetary gear head ３． Introduction for developing instances ４． Applicable instances of product ５． Brush-up plan of products

2. SERVO TECHNO SYSTEM CO.,LTD Realized Compact size & High strength G.H Same strength as 50G gear head ( Allowable torque for G.H : 0.98N-m max.) Features Construction 37.2 dia. Planetary gear head ＤＭＥ３７ Series Motor part A view of G.H Internal Gear Output Shaft Carrier Planetary Gears 4pcs. / stage 37.2 dia. Planetary Gear Head

3. SERVO TECHNO SYSTEM CO.,LTD 37.2 dia. Planetary Gear Head ３－Ｍ３ ４ depth Ｐ＝１２０ ° Ｐ. Ｃ. Ｄ＝２７ dia. Outline Variation of Series ※ ○ ： Completed △： Under plan Ｌ Φ ３７． ２ ０.５０.５ Φ６Φ６ Φ １２ ± ０. １ －０．０ ２ ０

4. SERVO TECHNO SYSTEM CO.,LTD 37.2 dia. Planetary Gear Head Example of application Reliability （ Motor speed 4000 r/min, Gear ratio 1/16 ） １） Life Load ： 0.706 Ｎ・ｍ Speed ： 250r/min Operation mode ： Repeating ‘2sec.ON→1sec.OFF’ More than 600hrs. ２） Sound level Less than 55db(A) ( 1m distance ) ３） Heat Cycle -10deg.C to ＋ 65deg.C for 240hrs. ４） Shock Test Half sin wave 300 ｍ／ｓ ８ｍｓ shock 3 times ５） Vibration Test 10 to 100 Hz, 10m ／ｓ, Applying X,Y & Z direction each 3 min. for 30 min. ※ Please contact to us in details ２ ２ ・ Changing M/C ： Conveyer of bill ・ Vending M/C ： Ejector & etc.

5. SERVO TECHNO SYSTEM CO.,LTD 30 dia. Planetary Gear Head Realized compact size & High strength of Gear. ( G.H allowable torque 0.19 N-m max. ） A view of G.H Features Construction Internal Gear Output Shaft Carrier Planetary Gears 3 pcs. / stage 30 dia. Planetary Gear Head ＤＭＥ２５ sires Motor Part

6. SERVO TECHNO SYSTEM CO.,LTD Ｌ Φ ３０ ０.５０.５ Φ６Φ６ Φ １２ ± ０. １ －０．０ ２ ０ ３－Ｍ３ ４ depth Ｐ＝１２０ ° Ｐ. Ｃ. Ｄ＝２１ dia. Outline Variation of Sires ※ ○ ： Completed △： Under plan 30 dia. Planetary Gear Head

7. SERVO TECHNO SYSTEM CO.,LTD Example of Application Reliability ( Motor speed 3000 r/min & Gear ratio 1/16 ) １） Life Load 98 mN-m & Speed 120 r/min Operation Mode ： Repeating ‘2.5scc ON→1 sec. OFF’ More than 900 hrs. ２） Sound level More than 40 dB(A) ( 1 m distance ) ３） Heat cycle -10deg.C to +65deg.C for 240 hrs. ４） Shock Test Half sin wave 300m/s for 8msec. Applying 3 times ５） Vibration Test 10 to 100Hz, 10m/s Applying 3 direction ( X, Y, & Z ) each 3 min. for 30 min. ※ Please contact to us in details 。 ２ ２ ・ Changing M/C ： Conveyer of bill ・ Vending M/C ： Ejector & etc. 30 dia. Planetary Gear Head

8. SERVO TECHNO SYSTEM CO.,LTD Ex. 1. Application ・ Compact ・ Low cost ・ＲｏＨＳ complied Rated voltage ＤＣ２４Ｖ Rated torque ５９ ｍＮ・ｍ Rated speed ５５．０ ｒ／ｍｉｎ No-load speed ６５．０ ｒ／ｍｉｎ Direction of rotation ＣＣＷ A view of unit Construction ＤＭＥ２５ Built-in Gear Unit Spec. ・ OA equipment ( Toner stirring unit ） Example of application Features

9. SERVO TECHNO SYSTEM CO.,LTD ＤＭＥ３７＋ Coin hopper G.H A view of G.H Construction Ex.2. Application ・ High strength of output Gear & Shaft ・ Low cost ・ High output Features Rated voltage ＤＣ２４Ｖ Rated torque ９８ ｍＮ・ｍ Rated speed １６９ ｒ／ｍｉｎ No-load speed １７９ ｒ／ｍｉｎ Direction of rotation ＣＷ ・ Amusing equipment ( Coin hopper ) Example of application Spec.

10. SERVO TECHNO SYSTEM CO.,LTD ・ Multi-shaft / Gear unit ・ Saving the space ・ Reducing usage of motors Features Under development ＤＭＥ３４＋ Multi-output shaft A view of G.H Ex. 3. Application ・ Special application Example of application Spec. Under preparation

11. SERVO TECHNO SYSTEM CO.,LTD Ex. 4. Application Copier （ Toner stirring unit ） Coin Hopper ※ Refer to Ex.1 ※ Refer to Ex.2

12. SERVO TECHNO SYSTEM CO.,LTD Ex. 5. Application Rack & Pinion UnitValve Switch Unit

13. SERVO TECHNO SYSTEM CO.,LTD Ex. 6. Application Electric Linear Actuator

14. SERVO TECHNO SYSTEM CO.,LTD Brush-Up Plan I ■ Content of Brush-up Concept Brush-up product Standardization of products High Quality Long Life ＤＭＥ２５ ＤＭＥ３７ High production efficiency New ＤＭＥ６０ New ・ Research into the application & Realizing High reliability product design. ・ 1 M times operations ( １ｓｅｃＯＮ / ＯＦＦ） ・ Line up as New Series ・ＤＭＥ３７＆ Planetary ＧＨ development in Priority ・ Similar figure design ・ Standardize from current series to the above new series but current series are not changed for the short time.

15. SERVO TECHNO SYSTEM CO.,LTD ＳＢＳＢＫＳＢＫＪＳＢＳＢＢ ＤＭＥ ２５ ＤＭＥ ３３ ＤＭＥ３４ＤＭＥ３７ ＤＭＥ ４４ ＤＭＥ ６０ 0.731.34.574.67.29.23 ＤＭＥ２５ＤＭＥ３７ ＤＭＥ ６０ Continuous Short time Continuous Sintered alloySintered Ｂ．Ｂ Terminal Holder method Holder Current Series Output Rating Bearing Input Brush New Series 17.214.8 9.21326 ◎ Insulation improved ◎ Long life by bigger brush & bearing ◎ Process & products are standardized by standard design. ◎ Simplification of input method(Lead wire type is also available) ◎ Special appearance is under consideration for new series. Features ■ New Series Outline Brush-Up Plan Ⅱ

16. SERVO TECHNO SYSTEM CO.,LTD Ｓ DME38S Ｂ Ｋ ５ １０１０ １５１５ ２０２０ Ｏｕｔｐｕ ｔ（Ｗ） ０.５０.５ ２.０２.０ １.５１.５ １.０１.０ DME38 B ＤＭＥ３８ Series DME44S DME44 B Ｃｏｓｔ ＤＭＥ４４ Ｓｅｒｉｅｓ ＤＭＥ６０ Series DME60S DME60 B Ｊ New- Ｊ New- Ｋ Ｈ （Ｎｅｗ Ｍｏ ｄｅｌ） ＤＭＥ３７ Series ■ ＤＭＥ３７ Series Map Ｄｅｖｅｌｏ ｐｍｅｎｔ Ｃｏｍｐｌｅ ｔｅ Ａｐｒ．／２ ００５ Brush-Up Plan Ⅲ