1. Modular Flexible Manufacturing System for Industrial Engineering teaching and research http://www.dolangeducation.com/m ps-training-series/

2. DLMPS-205 Modular flexible production system Overview ● The system consists of distribution unit, testing unit, handling unit, pressing unit, sorting units. Each station of this system is installed on groove aluminum plates. Each station can be connected to be an automatic product line. ● All stations are composed of modular form. Each station is easy to set up, disassemble and maintenance. Each station can be combined freely. ■ Technical Parameter ● Total dimension : 2450×790×2400mm ● Input power : single-phase,three-wire AC 220V±10% 50Hz/60HZ ● Output power : AC 220V safety socket ● Capacity : < 2KVA Distribution unit Testing unit Handling unit Pressing unit Sorting unit ■ Optional ● Computer,computer table ● PLC module ● Air compressor

3. DLMPS-600A Modular flexible production system Overview ● The system consists of six stations: distribution unit, testing unit, processing unit, handling unit, assembly unit and classification storage unit, the main components of the system including: PLC, HMI, handling manipulator, switching power supply, hopper, sorting bin, workpiece pushing member, slide bar pushing member, punch motor assembly, detection cylinder assembly, translation stage, rotating table, cylinder, solenoid valve, DC gear motor, vacuum generator, various industrial sensors, a variety of commonly used detection typical switch, button. ● The system software is controlled by MCGS industrial configuration monitoring software, through the software can monitor the operational status and operation process. ■ Technical Parameter ● Total dimension : 3600×800×1420mm ● Input power : single-phase, three-wire AC 220V±10% 50Hz/60Hz ● Capacity : < 5KVA ■ Optional ● Computer, computer table ● PLC module ● Air compressor

4. DLMPS-500C Modular flexible production system Overview This system mainly consists of 5 stations, respectively is: distribution unit, testing unit, processing unit, robot handling unit, sorting and storage unit. The difference between DLMPS-500A Training System is that the robot handling unit adopts swing cylinder manipulator. Technical Parameter Total dimension : 3000×800×1420mm Input power : single-phase, three-wire AC220V±10% 50Hz/60Hz Capacity : ≤ 2KVA Optional Computer, computer desk PLC module Air compressor