1. Control system at the FREIA Laboratory
ICS – FREIA meeting
Uppsala, March 2016

2. People Head of FREIA Physics Control system Engineering Project leader
T. Ekelöf
Physics
V. Goryashko
Han Li
A. Bhattacharyya
V.Ziemann
M. Olvegård
Control system
K. Fransson
K. Gajewski
M. Jacewicz
Engineering
J. Eriksson
M. Jobs
Å. Jönsson
T. Lofnes
T. Pettersson
R. Santiago Kern
R. Wedberg
A. Wirén
Project leader
R. Ruber
Site manager
L. Hermansson
Note: this is not a formal organization diagram
22-March-2016
Konrad Gajewski - FREIA introduction

3. Infrastructure LHe Cryo plant HNOSS – horizontal cryostat
Subatmospheric pumps
Electrosys tetrode RF station
DB Elettronica tetrode RF station
Deionized water cooling system
Bunkers and radiation monitoring system
22-March-2016
Konrad Gajewski - FREIA introduction

4. Control system - software
Epics based (CODAC 4.1, EEE)
HMI – BOY (CODAC/EEE)
Archiver BEUTY (CODAC)
Alarm server (BEAST) (CODAC)
IOCs (EEE)
Logbook (elogbook, DESY)
Measurement automatization – LabVIEW
Epics modules used at FREIA
s7plc (Cryo system, HNOSS, DB RF station, slow interlocks)
Modbus (Dewpoint meter)
Snmp (Electrosys RF station)
StreamDevice (Vacuumeters, radiation detectors, environment data)
Sequencer
Autosave
22-March-2016
Konrad Gajewski - FREIA introduction

5. Control system - hardware
HP ProLiant DL380p Gen8 – Server
128 Gb RAM, 200 MB SSD, 300 GB Raid1, 1 TB Raid1
Virtual Machine host (Ubuntu)
Virtual Machines (clients):
CSS archive server
CODAC desktop, CSS alarm server
EEE server
Linux workstation (HMI, DM)
Windows PCs (LabVIEW, WinCC, DMs)
IOCs
NUC (i3, 4Gb RAM)
cPCI (timing generator – to be installed)
MTCA (LLRF)
NI CompactRIO (fast interlocks)
22-March-2016
Konrad Gajewski - FREIA introduction

6. Control system hardware (cont)
Siemens S7-300 PLC (Profibus, DIO, AI)
Instrumentation
VNA
Function generators
Spectrum analyzers
Oscilloscopes
NI PXI (LLRF, DAQ)
22-March-2016
Konrad Gajewski - FREIA introduction

7. Control system - network
Public subnet (Gbit)
Public WLANS (eduroam, FREIA_guest)
Gbit router to private network (NAT)
Several subnets (Cryo-system, HNOSS, PLCs, Epics)
Possibility to connect via VPN (L2TP/IPSec) or ssh from outside
WLANS (FREIA_WLAN, FREIA_MEAS)
Epics gateway (private network – office network)
22-March-2016
Konrad Gajewski - FREIA introduction

8. Procedures Documentation Common file server (Windows) for FREIA
FREIA reports (DIVA)
Indico
Cable database (MySQL, web interface)
Log books – electronic logbooks for:
FREIA measurements
Control system
Cryostat
Cryo-system
Source code repository – bitbucket (ESS)
Issue tracking, communication - JIRA (ESS) – limited use so far, mainly for control system related stuff
Weekly FREIA meetings (with possibility to join via telephone)
22-March-2016
Konrad Gajewski - FREIA introduction

9. FREIA contribution (control system)
Development of the control system for the acceptance tests of the spoke cavities cryo-module
Acquire the hardware needed for the system
Build and test the control system compatible with ICS
Integrate the testing procedures and the saving of the results in the ESS’s IT infrastructure
Dependencies:
Access to the ESS IT infrastructure for storage of the test results.
Access to the vacuum and cryogenic components developed by ESS.
Deliverables:
Control system for testing the spoke-cryomodule (software and hardware compatible with ICS).
22-March-2016
Konrad Gajewski - FREIA introduction

10. FREIA contribution (control system)
Control System, Methodology and Procedures for Machine Physicists
Identification of the measurements that are of interest for the machine physicists,
Implementation of the control system in ICS for the tests and performing the measurements.
Dependencies:
An ESS LLRF system, including the ICS hardware and software, for use during the test.
Access to the ESS IT infrastructure for storage of the test results.
Deliverables:
Report containing the description of the tests.
The tests results in a format compatible with ICS requirements.
22-March-2016
Konrad Gajewski - FREIA introduction

11. FREIA contribution (control system)
Control Systems for the Lund Test Stand
Develop controls and software in ICS to be used at the Lund Test Stand,
Assist with the installation and commissioning at the Lund Test Stand.
Dependencies:
An ESS LLRF system, including the ICS hardware and software, for use during the test.
Access to the ESS IT infrastructure for storage of the test results.
Deliverables:
Help with controls integration, installation and commissioning of the elliptical cavities test stand.
Software derived from the spoke cryo-module control system that can be used at Lund Test Stand.
22-March-2016
Konrad Gajewski - FREIA introduction

12. ESS deliverables LLRF system to be used for all tests
Prototype spoke resonator cryomodule including hardware and software for using during the test
Fully functional prototype spoke valve box
High Voltage modulator and klystrons
22-March-2016
Konrad Gajewski - FREIA introduction

13. Areas where ESS can help
LLRF
Piezzo tuner
Step motor control
Timing system (TG)
Cryomodule and valvebox controller (PLC)
Modulator and klystron controls
Instrument EPICS drivers
Vacuum devices (serial) Epics drivers
IOC logs
IOC deployment
OPI symbol library, color scheme
Transition CODAC->EEE
Alarms (BEAST)
Archiver (AA)
22-March-2016
Konrad Gajewski - FREIA introduction

14. Areas where ESS can help (cont)
JIRA
FREIA Wiki page
22-March-2016
Konrad Gajewski - FREIA introduction