1. Copenhagen, 16th and 17th June 2016
2nd Eionet NRC workshop on Industrial Pollution LCP data collecting and verification in Poland
Copenhagen, 16th and 17th June 2016

2. I
National Greenhouse Gases and Other Substances Emissions Database (National Database) – collecting and first stage of verification II
Final stage of verification

3. I. National Greenhouse Gases and Other Substances Emissions Database (National Database)

4. Informations reported to National Database:
Administrative data of industrial plant
Technological structure of industrial plant (installations, sources – boilers, gas turbines…, stacks, abatement techniques)
Combusted fuels
Heat and power production
Emissions to air
Permissions for emissions to air and IPPC permits

5. Verification mechanisms in National Database:
Verifications at the form level
Errors
Datasheets
Explanations

6. Verifications at the form level

7. Errors

8. Datasheets

9. Explanations

10. II. Final stage of verification

11. Amount of annual emission control
Analysis of reports from two adjacent years (report periods)
Amount of annual emission control
Number of operating hours of seperate source (boiler, gas turbine…)
Fuel combustion structure
Fuel parametres:
Sulphur content
Ashes content
Net calorific value
Real efficiency of abatement techniques
Number of operating hours of abatement techniques
Differences between emission factors (related to annual energy input)

12. Amount of annual energy input control
Analysis of reports from two adjacent years (report periods)
Amount of annual energy input control
Number of operating hours of seperate source (boiler, gas turbine…)
Differences between emission factors (related to annual energy input)

13. Amount of annual energy input control
Analysis of particular year report
Amount of annual energy input control
Heat and power production related to annual energy input:
0,1< 𝑃𝑐[𝐺𝐽]+𝑃𝑒[𝑀𝑊ℎ]∗3,6 𝐸𝑐ℎ[𝐺𝐽] <1
Pc – amount of annual heat production [GJ]
Pe – amount of annual power production [MWh]
Ech – amount of annual energy input [GJ]

14. Analysis of particular year report
Amount of annual energy input control
Ratio fuel input/capacity:
𝑀𝑎𝑥𝑖𝑚𝑢𝑚 𝐸𝑛𝑒𝑟𝑔𝑦 𝐼𝑛𝑝𝑢𝑡 𝑇𝐽 =𝑅𝑇𝐼[𝑀𝑊𝑡ℎ]∗3600[𝑠]∗8760[ℎ]/
𝐴𝑛𝑛𝑢𝑎𝑙 𝑓𝑢𝑒𝑙 𝑖𝑛𝑝𝑢𝑡/ max 𝑓𝑢𝑒𝑙 𝑖𝑛𝑝𝑢𝑡 𝑟𝑎𝑡𝑖𝑜 = Total Energy Input Reported (TJ) Maximum Energy Input (TJ)
1>𝑅𝑎𝑡𝑖𝑜 𝑓𝑢𝑒𝑙 𝑖𝑛𝑝𝑢𝑡/𝑐𝑎𝑝𝑎𝑐𝑖𝑡𝑦>0,1 ID
RTI [MWth]
Maximum Energy Input (TJ)
Total Energy Input Reported (TJ)
Annual fuel input/ max fuel input ratio X
3500
65 524
0.594 Y
3100
97 762
43 447
0.444 Z
4000
54 305
0.431

15. Analysis of particular year report
Phone call
Mail
Official letter
Examples of explanations:
I’ve made a mistake…
failure of the monitoring/measuring device

16. Krystian Grzybowski krystian.grzybowski@kobize.pl tel +48 22 56-96-545