Presentation is loading. Please wait.

Presentation is loading. Please wait.

Quick Reference Parts Guide Introduction

Published byCarmel Golden Modified over 7 years ago

Similar presentations

Presentation on theme: "Quick Reference Parts Guide Introduction"— Presentation transcript:

1 Quick Reference Parts Guide Introduction
Main Menu This Quick Reference Parts Guide is an easy way to locate part numbers to common replacement parts. It does not include items such as wire or their cord grips, terminal blocks, or mounting brackets. It also does not include standard hardware like nuts and bolts. To locate parts that are not covered here, refer to the drawing set in your equipment manual. Navigating the CD Exit

2 Navigating the Quick Reference Parts Guide
Main Menu The next screen is the Main Menu, which has buttons to reach each category that this parts guide uses. Each category may be further divided into different sections, each with their own button on the category’s main screen. From each screen, you can: Return to the Main Menu Return to the category’s main page Go forward or backward one screen at a time within the category Click a link to order the part on-line or via Exit How to get To the eStore To access a different program or file while leaving the Quick Reference Parts Guide open, hold the Alt button while pressing the Tab button on your keyboard.

3 Once you find the part number you need, click on the web site link
How to get to the eSTORE Example

4 This is the web site, click on the machinery tab
How to get to the eSTORE

5 Click the Ordering Parts menu, then, click eStore.
How to Get to the eStore

6 How to Get to the eStore Main Menu Exit
Enter your eStore login and password and click Login. If you need to register, click the Click here to register button. Main Menu Exit How to Get to the eStore

7 OMNI MISER II Main Menu Navigating the Electrical Parts Main CD
Exit Main Menu Mechanical Parts Main Electrical Parts Main Infeed Rail Main Operator Console Main Pneumatic Parts Main

8 Electrical Parts Main Menu
Exit Click on the electrical box or on the cover where the part you need is located Side view Front view Rear view

9 Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Part # Breaker Part # Part # Part # Breaker Part # Fuse Part # Fuse Part # Fuse Part # Overload Contact block part#

10 Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Part # Contactor Part # Part # Contactor Part # Power Supply

11 Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Part # Relay Card Part # Power Supply

12 Electrical Parts Main Menu Exit www.mii.com Part# 92227R Part#92225R

13 Electrical Parts Main Menu Exit www.mii.com Part# 192657 CAC Card

14 Electrical Parts Main Menu Exit www.mii.com Part# 005-03802
Standstill Monitor

15 Electrical Parts Main Menu Exit www.mii.com Part# 005-01500 Blade
Servo Amp Only Part# Part# Fan

16 Electrical Parts Main Menu Exit www.mii.com Part# 194652 CSTC Card
CETC Card

17 Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Stroke Motor

18 Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com

19 Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Angle Home Sensor Part # Angle Max Sensor

20 Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Angle Motor Part # Angle Encoder

21 Electrical Parts Main Menu Exit www.mii.com Part# 504663 Door Switch
Switch only part# Switch assembly part# Includes conduit and cabling Part # Elev. Motor Part # Encoder Part # Elev. Brake

22 Electrical Parts Main Menu Exit www.mii.com mitekparts@mii.com
CTRM Card Part # LASM Encoder

23 Electrical Parts Main Menu Exit www.mii.com Part # 97013-501
Lockout Prox Part # LASM Max Sensor

24 Electrical Parts Main Menu Exit www.mii.com Part # 97019-501
LASM Home Sensor

25 Electrical Parts Main Menu Exit www.mii.com Part # 005-00019
LASM Motor

26 Electrical Parts Main Menu Exit www.mii.com
Prox switch Part# Part # Blade Motor Part # CLS Sensor

27 Electrical Parts Main Menu Exit www.mii.com Part # 005-00019
Outfeed Motor

28 Electrical Parts Main Menu Exit www.mii.com Part# 194649 CTRM Card
Air Pressure Sensor

29 Inker End Electrical Parts Driven End Electrical Parts
Infeed Rail Main Main Menu Exit Inker End Electrical Parts Driven End Electrical Parts

30 Inker End Electrical Parts Part # 97071-501 Gripper Min sensor
Main Menu Exit Rear view Front view Part # Gripper Encoder Part # PE Receiver Part # PE Emitter Part # Gripper Min sensor Part # MPE Card

31 Driven End Electrical Parts
Main Menu Exit Part # Gripper Home Sensor Part # M2EC Part # X 3 Part #

32 PC, Monitor and Keyboard
Operator Console Main Main Menu Exit PC, Monitor and Keyboard Click on the switch needed

33 Operator Console Main Menu Exit www.mii.com Part # 511532

34 Operator Console Main Menu Exit www.mii.com Part # 005-00391

35 Operator Console Main Menu Exit www.mii.com Part # 005-00337

36 Operator Console Main Menu Exit www.mii.com Part # 005-00337

37 Operator Console Main Menu Exit www.mii.com Part # 005-00337

38 Operator Console Main Menu Exit www.mii.com Part # 005-00337

39 Operator Console Main Menu Exit www.mii.com Part # 005-00339

40 Operator Console Main Menu Exit www.mii.com Part # 005-00339

41 Operator Console Main Menu Exit www.mii.com Part # 511538 assembly

42 Operator Console Main Menu Exit www.mii.com Part # 504692 PC
Monitor Not Shown Part # Part # PC Part # Com Card Part # I/O Card

43 Click on the cover where the part you need is located
Pneumatic Parts Main Main Menu Exit Click on the cover where the part you need is located

44 Pneumatic Parts Main Menu Exit www.mii.com mitekparts@mii.com
Gage Part # Air Pressure Sensor Part # Valve Part # Air Shut Off Part # Regulator Part # Air Dump Part # Coil Part # Exhaust Muffler Part # Regulator

45 Pneumatic Parts Main Menu Exit www.mii.com Part # 005-04462
Exit Complete Assembly # Part # Relief Valve Part # Regulator Assy

46 Pneumatic Parts Main Menu Exit www.mii.com mitekparts@mii.com
Part # Valve Part # Coil Part # Exhaust Muffler Part # Festo Sensor Part # Cylinder

47 Pneumatic Parts Main Menu Exit www.mii.com
Exit Part # Cylinder Part # mm Print Head Part # Exhaust Valve

48 Pneumatic Parts Main Menu Exit www.mii.com mitekparts@mii.com
Sensor Assembly Part # Cylinder Part # Fitting Part # Bulkhead Fitting Part # Fitting

49 Pneumatic Parts Main Menu Exit www.mii.com Air cylinder # 85448
Exit Air cylinder # 85448

50 Part # 005-06118 Hold Down Cylinder
Pneumatic Parts Main Menu Exit Part # Air Cylinder Part # Hold Down Cylinder

51 Click on the cover where the part you need is located
Mechanical Parts Main Main Menu Exit Click on the cover where the part you need is located

52 Mechanical Parts Main Menu Exit www.mii.com
Exit Part # Outfeed Side Part # Infeed Side Part # Outfeed Side X3 Part # Infeed Side X3

53 Mechanical Parts Main Menu Exit www.mii.com Part # 005-03165
Exit Part # Screw Jack Part # Stroke Gearbox

54 Mechanical Parts Main Menu Exit www.mii.com mitekparts@mii.com
Belt Part # Shaft Part # Bearing Part # Bearing

55 Mechanical Parts Main Menu Exit www.mii.com Angle Gearbox #005-02962
Exit Angle Gearbox #

56 Mechanical Parts Main Menu Exit www.mii.com Part # 005-00010 Gas Shock
Exit Part # Gas Shock

57 Mechanical Parts Main Menu Exit www.mii.com Part # 005-02979 Gearbox
Exit Part # Roller Part # Steel Roller Part # Bearing Part # Clutch Part # Gearbox

58 Mechanical Parts Main Menu Exit www.mii.com Part # 005-03370 Fixed Jaw
Exit Part # Fixed Jaw Part # Floating Jaw

59 Mechanical Parts Main Menu Exit www.mii.com Part # 005-00010 Gas Shock
Exit Part # Gas Shock Part # LASM Bearing 4PK

60 Mechanical Parts Main Menu Exit www.mii.com Part #005-02972
Exit Part # Part # Drive end Kit Part # Belt Part # Pulley

61 Mechanical Parts Main Menu Exit www.mii.com Part #005-02972 LASM Belt
Infeed Side Part # LASM Belt Part # Idle End Kit

62 Mechanical Parts Main Menu Exit www.mii.com
Exit Part # Idler End Kit Part # Drive End Kit Part # Part # FT FT FT Part # Gripper V-Belt Part # Pulley

63 Mechanical Parts Main Menu Exit www.mii.com For use later
Exit For use later

64 Mechanical Parts Main Menu Exit www.mii.com For use later
Exit For use later

Download ppt "Quick Reference Parts Guide Introduction"

Similar presentations

Purpose Body Making module is designed for bending the laminated foil film in the shape of a tube, for welding the side seam and for cutting bodies with.

Purpose Body Making module is designed for bending the laminated foil film in the shape of a tube, for welding the side seam and for cutting bodies with.
Common Faults - Machinery Cover missing or not fitted correctly Action : replace or refit covers Nuts or bolts missing from covers Action : replace Seals.

Common Faults - Machinery Cover missing or not fitted correctly Action : replace or refit covers Nuts or bolts missing from covers Action : replace Seals.
Engineer Training XL1200 Mechanics. Engineer Training XL1200 Mechanics Confidential 2 The XL1200 is both a Roll to Roll and a Roll to Sheet Printing Machine.

Engineer Training XL1200 Mechanics. Engineer Training XL1200 Mechanics Confidential 2 The XL1200 is both a Roll to Roll and a Roll to Sheet Printing Machine.
Optical Manufacturing Solutions 1 Probe Assembly.

Optical Manufacturing Solutions 1 Probe Assembly.
HYDRAULICS & PNEUMATICS

HYDRAULICS & PNEUMATICS
Ejection module is the last mechanism in KOMBIS TMM8003. It is designed to eject the ready tube from machine.

Ejection module is the last mechanism in KOMBIS TMM8003. It is designed to eject the ready tube from machine.
Unwinding module is designed for unwinding of laminate tape, for its steering, for the cutting of the necessary width and for the easy feeding of material.

Unwinding module is designed for unwinding of laminate tape, for its steering, for the cutting of the necessary width and for the easy feeding of material.
Overview The top seal mechanism consists of a foil unwinding and feeding mechanism and a cutting and welding mechanism. It is designed to cut out and weld.

Overview The top seal mechanism consists of a foil unwinding and feeding mechanism and a cutting and welding mechanism. It is designed to cut out and weld.
PEUGEOT 206 INSTALLATION 99’— 05’ TU5JP4

PEUGEOT 206 INSTALLATION 99’— 05’ TU5JP4
Installation. Indoor Unit Installation Typical Installation.

Installation. Indoor Unit Installation Typical Installation.
Engineer Training Mechanical Overview. Engineer Training Confidential 2 XL1500 is both Roll-to-Roll and Roll-to-Sheet Printer MachineXL1500-2mXL1500-3mXL1500-5m.

Engineer Training Mechanical Overview. Engineer Training Confidential 2 XL1500 is both Roll-to-Roll and Roll-to-Sheet Printer MachineXL1500-2mXL1500-3mXL1500-5m.
Create New Account. Use of the Winland EnviroAlert EA800-ip requires an account for remote access to: –View real-time sensor data –Modify setting configurations.

Create New Account. Use of the Winland EnviroAlert EA800-ip requires an account for remote access to: –View real-time sensor data –Modify setting configurations.
Installation. Indoor Unit Installation Typical Installation.

Installation. Indoor Unit Installation Typical Installation.
SMARTLINE. WHY 4X1 ? Less space requirement Fast make ready time Less power consumption.

SMARTLINE. WHY 4X1 ? Less space requirement Fast make ready time Less power consumption.
Robotics – 8. Plates (2-sizes) Plate with holes on 0.500 increments and 1/8 diamonds in between. Can be cut on 0.500 increments. Available in two sizes.

Robotics – 8. Plates (2-sizes) Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments. Available in two sizes.
Www.mmu.ac.uk/itservices/ IT Services Getting Started on your iPad Created by Michael Mackenzie.

IT Services Getting Started on your iPad Created by Michael Mackenzie.
Easy Reach 7.0 Honda Element Packing List QtyDescriptionPacked 115ft 10ga Red Wire 16ft 10ga Black Wire 140amp Breaker 23/8 Yellow Ring Terminals 25/16.

Easy Reach 7.0 Honda Element Packing List QtyDescriptionPacked 115ft 10ga Red Wire 16ft 10ga Black Wire 140amp Breaker 23/8 Yellow Ring Terminals 25/16.
TEAM 5950 CODE NAME “LITTLE BOY”. DRIVE BASE- ANDYMARK AM-14U3 Multiple configurations- we chose the 32” X 36” slim design Price $599 included in KOP.

TEAM 5950 CODE NAME “LITTLE BOY”. DRIVE BASE- ANDYMARK AM-14U3 Multiple configurations- we chose the 32” X 36” slim design Price $599 included in KOP.
1 Product Immersion Olathe June 2009. 2 FS 4800 Available as a front pivot (Standard) or rear pivot model 900mm (36”) Maximum Blade Capacity 35.7 kW (48.

1 Product Immersion Olathe June FS 4800 Available as a front pivot (Standard) or rear pivot model 900mm (36”) Maximum Blade Capacity 35.7 kW (48.
Engine Brake VEB + VEB + is the name of the Volvo engine braking system and is a further development of the VEB engine brake. Engine brake VEB + consists.

Engine Brake VEB + VEB + is the name of the Volvo engine braking system and is a further development of the VEB engine brake. Engine brake VEB + consists.

Similar presentations

Ads by Google