1. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
Fingertip temperature response during DTM (clinical data, sampled data averaged over 1 s interval, symbols added for clarity)

2. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
Finger model components and steady-state temperature (°C) distribution at the sensor plane with the finger enclosed in an air cavity (simulation conditions same as Fig. )

3. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
Histogram of grid quality (measured by equiangle skew): (a) sensor plane for 3D simulations and (b) for 2D simulations

4. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
Steady-state temperatures (Tss) at the sensor location as a function of Qs for an upward air velocity of 0.1 m/s

5. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
Steady-state temperature distribution (internal and external to the finger, shown in three planes) for Qs=10 cc/min and air velocity=0.1 m/s (see Fig. )

6. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
Artery surface temperature (°C) during the recovery stage, toccl,end=time at the end of occlusion (Qs=10 cc/min, b=4, tc=60 s, Tambient=22°C, air velocity=0.1 m/s)

7. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
Fingertip temperature response during DTM; measured (o—occluded arm, x—control arm) and simulated (-) for conditions Tambient=24.8°C, Qs=35 cc/min, b=1.5, tc=120 s, air velocity=0.02 m/s

8. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
DTM response (Qs=10 cc/min, b=4, tc=60 s, Tambient=22°C, air velocity=0.1 m/s)

9. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
TR dependence on Qs for b=2,4,6; curve fit lines shown only for trend purposes and do not represent actual data points

10. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
NP dependence on Qs for b=2,4,6; curve fit lines shown only for trend purposes and do not represent actual data points

11. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
TTR (min) dependence on Qs for b=2,4,6; curve fit lines shown only for trend purposes and do not represent actual data points

12. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
AUC dependence on Qs for b=2,4,6; curve fit lines shown only for trend purposes and do not represent actual data points

13. Date of download: 9/22/2017
Copyright © ASME. All rights reserved.
From: Sensitivity of Digital Thermal Monitoring Parameters to Reactive Hyperemia
J Biomech Eng. 2010;132(5): doi: /
Figure Legend:
TR dependence on start temperature for b=2,4,6; curve fit lines shown only for trend purposes and do not represent actual data points