1. Pilot Walktour Pack Product Overview v3.2

2. Contents 1. Overview 2. Product Details 3. New Features
4. Main Features
5. Supported Terminals
6. Conclusion

3. Pilot Walktour pack Overview

4. Comprehensive information
Product Introduction
概 述
Pilot Walktour Pack is a portable multi-technology test tool for measuring wireless network quality and services performance. With an iPad and smart phones integrated into a single backpack, the system provides powerful functions for multi-network benchmarking. Pilot Walktour Pack's unique design allows users to perform measurements on test sites, network performance, and services quality in a convenient way.
High work efficiency
Centralized control
Comprehensive information

5. Traditional Drive Test Tool
Product Introduction
概 述
Multiple test devices for network benchmarking. Not portable enough due to equipment set up
Connection via cable or USB port
Sufficient power solution needed for continuous outdoor tests
Mostly dependent on iPhone and Android based devices
Traditional Drive Test Tool
Portable, a backpack contains all test devices
Connection with WiFi or data cable
Stable, and easy for commissioning
Built-in battery
Continuous test capability: up to eight hours
Multiple commercial handsets used for testing
Pilot Walktour Pack
Powerful, portable, simple operation for benchmarking testing

6. Pilot Walktour pack Product Details

7. Product Details-System Architecture
产品介绍
Portable benchmarking tool
Based on commercial mobile phones
Controller
Data interaction
Wi-Fi/Cable Connection
Control interaction
Data management and analysis platform
Pilot Pioneer Expert
Post-processing

8. Product Details-System Solution
iPad
Mobile Phone
Pilot Walktour Pack Case
Controller
Configure test terminal groups
Deliver test plans
Manage data files
Monitor test terminals and test progress
Display real-time test information
Test terminal
Based on iOS/Android operating system for measuring wireless network quality and services performance
Supports GSM/UMTS/LTE network technologies
Collect wireless parameters
Fix test terminals
Supports a maximum of six terminals for continuous (up to) eight hours testing
Connect with iPad through Wi-Fi
Automatically detect devices for connection

9. Product Details-System Solution
Pilot Walktour Pack
Portable benchmarking test
Various test services
Simultaneous multi-network testing
Managed by one engineer throughout the whole testing
Monitor real-time test progress and check parameter information
Customized test groups
CS Call, CSFB
FTP, Ping, , HTTP Page, Parallel Service, Video Play, HTTP Download, PBM, Speedtest, etc.
Various test scenarios
Measurements from a user's perspective
Outdoor and Indoor tests
Outdoor GPS positioning and indoor pin-pointing test
Accurate and detailed parameter information
Commercial mobile phones based on iOS/Android operating system
Measurements from a user's perspective
Collects various wireless parameters

10. Product Details-System Solution
Test anytime anywhere
Indoor Test: such as within passenger lifts, shopping center, residential buildings and scenic areas.
Outdoor test
Pre-defined floor plans
Building GPS location
Indoor coverage distribution display
JPG/PNG/BMP map import
Automatic map import for indoor test
Log files storage according floor level
Built-in high performance GPS
Google online/offline map
User-defined parameters display
Cell site details

11. Product Details-System Solution
Data management and analysis
Test events and alarms can be checked on the mobile phone.
Fleet Unify and Pilot Navigator are used for data analysis and management.
Various analysis and reports are supported.
Pilot Pollution Analysis
Neighbor Cell Analysis
Overlapping Analysis
Single-cell Coverage Analysis
Co-channel/Adjacent Channel Analysis
Effective Cell Analysis
No Main Serving Cell Analysis
Overshooting Cell Analysis
MOC-MTC Report
Data Service Report
Custom Events Analysis
BIN Analysis
Difference Value Analysis
PPP Analysis
Signaling Delay Analysis
MOC-MTC Analysis
Coverage Rate Analysis
Frequent Handover Analysis

12. New Features In Version 3.2

13. Reconstruction of Data File Management Function
新功能
Sort Function: Data files can be sorted based on upload status and data time.
Multiple Data Formats: Multiple data formats (including *.rcu, *.dtlog, *.pcap) are supported for data upload to Pilot Fleet Unify.
Real-Time Data Upload: Data files can be uploaded to the user-defined FTP server in real time.
Event Search Function: Users may search events based on keywords, and corresponding events will be displayed on the interface.

14. MOS Test Added
新功能
MOS test option is added to the Call test settings page. Users may set MOS test type and MOS algorithm type.

15. Customize Test Process Tags
新功能
During service test, users may add tags to mark the test process as required. The added tags will be saved to corresponding data files.

16. Freeze Measurement Information Screen
新功能
Users may freeze the real-time test information screen as required.
After freezing, there is no real time update on the event and message information (but the information is still collected in the background), thereby allowing users to check the current event and message history.
The real-time event and message information can be updated again after unfreezing.

17. Real-Time Statistics 新功能
Real-time statistics for voice and data services test (e.g. success rate, speed) is supported in this version

18. Remotely Reboot or Shut down Pilot Walktour Pack Case
新功能
Users may remotely reboot or shut down the Pilot Walktour Pack Case from the iPad. Therefore, users do not need to press and hold the power key for a physical rebooting or shutting down

19. Pilot Walktour pack Main Features

20. Upgraded Pilot Walktour Pack Case
Pilot Walktour Pack Case is upgraded to version 3.0. Android mobile phones are connected with the backpack Hub through data cables to ensure stable and reliable connection with iPad.

21. Various Test Services Supported
Various test services are supported.
Voice services: CS Call，CSFB
Data services: Ping, FTP UL/DL, HTTP Download, HTTP Page, WAP Page, WAP Download, Send, Receive, Trace route, Video Play, Facebook, Multi FTP Upload, Multi FTP Download, HTTP Upload, PBM
Others:
Idle, Parallel test
Loop test
PPP Connection modes for data services

22. Monitoring and Data Management
Real-time monitoring
Real-time parameters, events, messages of all devices can be monitored and displayed during tests.
Alarm
Supports various alarm modes: audio alarm, alarm with icons, alarm with subtitle, etc.
Supports alarm summary
Map
Collects GPS data and display tracks in real time
Support pin-pointing for indoor tests
Data
Data files are uploaded to the iPad for management after testing.
Test routes displayed on Map
Real-time Information
Data file uploaded to the iPad
Alarm

23. Application Scenarios
Indoor test: Within hotel buildings, Offices, etc.
Outdoor tests: road, high-speed rail, etc.
Outdoor tests: scenic spots
Outdoor tests: schools

24. Supported Terminals

25. Supported Terminals 支持终端 Supported iOS-based terminals are as bellows:
Device Model
Description
iPhone 6 (HK Version: A1586) iPhone 6Plus (HK Version: A1524)
2G: GSM/EDGE (850, 900, 1800, 1900 MHz) 2G/3G: CDMA EV-DO Rev. A and Rev. B (800, 1700/2100, 1900, 2100 MHz) 3G: TD-SCDMA 1900 (F), 2000 (A) 3G: UMTS/HSPA+/DC-HSDPA (850, 900, 1700/2100, 1900, 2100 MHz) 4G: FDD-LTE (Bands 1, 2, 3, 4, 5, 7, 8, 13, 17, 18, 19, 20, 25, 26, 28, 29) 4G: TD-LTE (Bands 38, 39, 40, 41)
iPhone 5S (HK Version: A1530)
2G: GSM/EDGE (850, 900, 1800, 1900 MHz) 3G: TD-SCDMA 1900 (F), 2000 (A) 4G: TD-LTE (Bands 38, 39, 40) 2G: GSM/EDGE (850, 900, 1800, 1900 MHz) 3G: WCDMA/HSPA+ DC (850, 900, 1900, 2100 MHz) 4G: FDD-LTE (Bands 1, 2, 3, 5, 7, 8, 20)
iPhone 5S (HK Version: A1533)
2G: GSM/EDGE (850, 900, 1800, 1900 MHz) 2G/3G: CDMA EV-DO Rev. A and Rev. B (800, 1700/2100, 1900, 2100 MHz) 3G: TD-SCDMA 1900 (F), 2000 (A) 4G: TD-LTE (Bands 38, 39, 40) 2G: GSM/EDGE (850, 900, 1800, 1900 MHz) 3G: WCDMA/HSPA+ DC (850, 900, 1900, 2100 MHz) 4G: FDD LTE (Bands 1, 2, 3, 4, 5, 8, 13, 17, 19, 20, 25)

26. Supported Terminals Supported Android-based terminals are as bellows:
Device Model
Description
Samsung Galaxy S5 (G9008V)
GSM: 850/900/1800/1900 MHz
TD-SCDMA: 1880/2010 MHz
WCDMA: 850/900/1900/2100 MHz, only supported on international roaming
TDD LTE: 1900/2300/2500/2600 MHz
FDD LTE: 1800/2600 MHz, only supported on international roaming
Samsung Galaxy S5 (G9006V)
UMTS: 850/900/1900/2100 MHz
LTE FDD: 1800 MHz
LTE TDD: 2300/2500 MHz
LTE FDD: 2100/2600 MHz, only supported on international roaming
Samsung Galaxy S5 (G9009W)
CDMA: 800 MHz
EVDO: 800 MHz
FDD LTE: 1800/2100 MHz
Samsung Galaxy Note3 (N9008S)
GSM: 850/900/1800/1900
TD-SCDMA: B34/39
TD-LTE: B38/39/40

27. Supported Terminals Device Model Description
Samsung Galaxy Note3 (N9008V)
GSM: 850/900/1800/1900 MHz
TD-SCDMA: 1880/2010 MHz
TD-LTE: 1900/2300/2600 MHz
WCDMA: 850/900/1900/2100 MHz, only supported on international roaming
FDD-LTE: 1800/2600 MHz, only supported on international roaming
Samsung Galaxy Note4 (N910G)
UMTS: 850/900/1900/2100 MHz
LTE-FDD: B1 (2100 MHz)/B2 (1900 MHz)/B3 (1800 MHz)/B4 (AWS)/B5 (850 MHz)/
B7 (2600 MHz)/B8 (900 MHz)/B28 (700 MHz)
LTE-TDD: B38 (2600 MHz)/ B40 (2300 MHz)
Samsung Galaxy S6 (G9200)
GSM: 850/900/1800/1900 CDMA: 800 UMTS: B1 (2100), B2 (1900), B5 (850), B8 (900) EVDO: 800 TD-SCDMA: B34 (2010), B39 (1880) FDD-LTE: B1 (2100), B3 (1800), B4 (AWS), B7 (2600), B8 (900), B28 (700) TDD-LTE: B38 (2600), B40 (2300), B41 (2500)

28. Conclusion

29. Conclusion—Portable Benchmarking Test Solution
应用场景
Product Advantages
Product Values 1
Portable, managed by one engineer for benchmarking tests 1
Tests with common handsets to perform measurements from user's perspective
Concurrent test on multi-network to reduce operational cost and minimize test period 2
Small and easy to operate 2 3
Built-in battery for continuous testing 3
Simple and easy operation for better productivity and shorten the learning curve 4
Built-in high-performance GPS 4
Product operation stability to enhance work efficiency

30. Customer Base
应 用
在海外国家和地区应用广泛