1. Farmer Friendly Solar Based Electric Fence
for Deterring Cattles

2. Introduction The main scope of project is, the photovoltaic cells are
converting the sunlight in to electricity a charge controller is used.
PV cells are bundled together in modules or panels to produce higher voltages and increased power.
As the sunlight varies in intensity the electricity so generated
usually charges through the charge a set of batteries for
storing the energy.

3. PROJECT BLOCK DIAGRAM

4. PHOTOVOLTAIC CELLS/SOLAR CELLS RESISTOR CAPACITOR
HARDWARE REQUIREMENTS
BATTERY
PWM Inverter
MOSFET
PHOTOVOLTAIC CELLS/SOLAR CELLS
RESISTOR
CAPACITOR

5. BATTERY
An electrical battery is a combination of one or more electrochemical cells, used to convert stored chemical energy into electrical energy.
The battery has become a common power source for many household, robotics and industrial applications.
Larger batteries provide standby power for telephone exchanges or computer data centers

6. Battery capacity and discharging

7. PWM Inverter IC
The PWM Inverter is used to develop the PWM pulses based on a fixed frequency using common oscillator
The IC SG3524 operates at a fixed frequency, the oscillation frequency is determined by one timing resistor RT and one timing capacitor CT.
The SG3524 contains an inbuilt 5V regulator that supplies as a reference voltage, also providing the SG3524 internal regulator control circuitry.
Comparator provides a linear control of the output pulse width (duration) by the error amplifier.
The resultant PWM pulse from the comparator is passed to the corresponding output pass transistor (Q1, Q2 refer block diagram) using the pulse steering flip flop, which is synchronously toggled by the oscillator output.

8. Inverter IC Block Diagram

9. MOSFET(IRF 510)
The metal–oxide–semiconductor field-effect transistor (MOSFET, MOS-FET, or MOS FET) is a device used for amplifying or switching electronic signals
The basic principle of the device a voltage on the oxide-insulated gate electrode can induce a conducting channel between the two other contacts called source and drain
It is by far the most common transistor in both digital and analog circuits, though the bipolar junction transistor was at one time much more common.

10. BC547 (NPN –Transistor)
The BC547 transistor is an NPN Epitaxial Silicon Transistor.
It is used in general-purpose switching and amplification BC847/BC547 series 45 V, 100 mA NPN general-purpose transistors.
The ratio of two currents (Ic/Ib) is called the DC Current Gain of the device and is given the symbol of hfe or nowadays Beta, (β).

11. The current gain from the emitter to the collector terminal, Ic/Ie, is called Alpha, (α), and is a function of the transistor itself

12. 1N4148
The 1N4148 is a standard small signal silicon diode used in signal processing.
The 1N4148 is generally available in a DO-35 glass package and is very useful at high frequencies with a reverse recovery time of no more than 4ns.
This permits rectification and detection of radio frequency signals very effectively, as long as their amplitude is above the forward conduction threshold of silicon (around 0.7V) or the diode is biased.

13. PHOTOVOLTAIC CELLS
Photovoltaic (PV) cells are made of special materials called semiconductors such as silicon, which is currently the most commonly used.
Basically, when light strikes the cell, a certain portion of it is absorbed within the semiconductor material.
PV cells also all have one or more electric fields that act to force electrons freed by light absorption to flow in a certain direction.
This flow of electrons is a current, and by placing metal contacts on the top and bottom of the PV cell, we can draw that current off to use externally.

14. SOLAR PANEL
Expose the cell to light, and the energy from each photon (light particle) hitting the silicon, will liberate an electron and a corresponding hole.
If this happens within range of the electric field’s influence, the electrons will be sent to the N side and the holes to the P one, resulting in yet further disruption of electrical neutrality
This flow of electrons is a current; the electrical field in the cell causes a voltage and the product of these two is power

16. QUERIES ?

17. THANKYOU