1. Identify the science building
Explaining the basics of plumbing

2. Learning Objectives: Students can describe the plumbing work.
Students can specify the kind of plumbing work.
Students can specify the materials to plumbing work.
Students can specify the equipment to plumbing work.
Students can create a drain pipe from the zinc plate galvanic.
Students can mention, kind of pipe and size to plumbing work.
Students can explain the various connective tool (pipe fitting).
Students can create a network installation of simple water.
Teknik Furnitur

3. The plumbing
Plumbing is all things relating to the implementation, maintenance, and repair plumbing tools and pipes and equipment. The outside or inside the building.
Teknologi dan Rekayasa

4. Various work plambing Sanitary drainage, Rain water drainage, Ven,
Drinking plumbing water system that is connected with the city.
Teknologi dan Rekayasa

5. Materials work plambing
Galvanic Zinc
Galvanic Pipe
PVC Pipe
Equipment sanitation
Teknologi dan Rekayasa

6. Various pipes and pipe size
Galvanic Pipe Galvanis pipes that are in trade berdiameter: ½ ", ¾", 1 ", 1 ½", 2 ", 2 ½", 3 ", 3 ½", 4 ", 5" and 6 ". With length 6 m.
PVC Pipe
Table size of PVC pipe:
……….
Teknologi dan Rekayasa

7. Teknologi dan Rekayasa

8. Teknologi dan Rekayasa

9. Tools connective pipe Tools connective pipe galvanic: Socket Knee Tee
Elbow
Stop tap
Contra mur
Niple
Reducer
Teknologi dan Rekayasa

10. Cont’d PVC pipe fittings: Reducing socket Faucet tee Socket
Union socket
Valve socket
VA socker
Elbow
VC socket
Tee
Cap
Faucet socket
PVC Glue
Faucet knee
Teknologi dan Rekayasa

11. Create a network channel water simple
Planning pipeline network (the blueprint isometri)
The calculation of the length of pipe.
Cutting pipe:
Cutting end to end.
Cutting end to center.
Cutting center to center
Twisting.
String network.
Teknologi dan Rekayasa

12. SIMPLE WHITE WATER NETWORK PLANNING
Teknologi dan Rekayasa

13. Pipe length calculation
Various of pipe length in the graphic:
End to end (E-E)
End to centre (E-C)
Centre to centre (C-C)
Teknologi dan Rekayasa

14. THE PIPE LENGTH CALCULATION
EXAMPLE:
Teknologi dan Rekayasa

15. PIPE NEEDS CALCULATION
Teknologi dan Rekayasa

16. TWISTING Check the square of the pipe’s end.
Clamp the pipe with the ragum.
Clean bram at the pipe’s end.
Mark the length of the twist.
Start twisting.
Teknologi dan Rekayasa

17. Creat the pipe network Prepare the seal tape. Prepare the pipe key.
Put the seal tape on the twist.
Put the twist in the fitting.
Make sure the connection is strong enough with the pipe key.
Teknologi dan Rekayasa

18. Daftar Pustaka
Tahar, Evri dkk Dasar-Dasar Plambing. Bandung: Angkasa. Rahayu, Rita Laksmitasari Sistem dan Perencanaan Plumbing. Jakarta: PT Prima Infosarana Media.
Teknologi dan Rekayasa

19. THANK YOU
Teknologi dan Rekayasa