1. Computer Language

2. Introduction
A language which is acceptable to a computer system, is called a computer language or programming language, and the process of writing instructions is such a language for an already planned program is called programming coding.
10/28/2017

3. All the computer languages can be broadly classified into three categories
Machine language
Assembly language and
High-level language
10/28/2017

4. Machine Language
A programming language, which can be understood by a computer without using a translation program, is called the machine language of the computer.
It is normally written as strings 1s and 0s.
10/28/2017

5. Advantages and Limitations of Machine Language
Program written in machine language can be executed very fast by the computer.
This is because machine instructions are directly understood by the computer, and no translation of the program is required.
However writing a program in machine language has several disadvantages, which are described below :
Machine dependent : Because the internal design of every type of computer is different from every other type of computer, the machine language also differs from computer to computer. Hence, after becoming proficient in the machine language of a particular computer, if a company decides to change to another computer, its programmers will have to learn a new machine language, and would have to rewrite all the existing programs.
10/28/2017

6. Difficult program: Although machine language programs are directly and efficiently executed by the computer, it is difficult to program in machine language . It is necessary for the programmer either to memorize the dozens of operation code numbers for the commands in the machine’s instruction set or to constantly refer to a reference card.
A programmer is also forced to keep track of the storage locations of data and instructions. Moreover, a machine language programmer must be an expert who knows about the hardware structure of the computer.
10/28/2017

7. Difficult to modify: It is difficult to correct or modify machine language programs. Similarly, modifying a machine language program later is so difficult that many programmers would prefer to code the new logic afresh, instead of incorporating the necessary modifications in the old program.
Error prone: For writing programs in machine language, since a programmer has to remember the opcodes, and must keep track of the storage locations of data and instructions, it becomes very difficult for him/her to concentrate fully on the logic of the problem. This frequently results in programming errors.
10/28/2017

8. Assembly Language
A language, which allows instructions and storage locations to be represented by letters and symbols, instead of numbers, is called assembly language or symbolic language. A program written in an assembly language is called assembly language program or a symbolic program
10/28/2017

9. Advantages of Assembly Language over Machine language
Easier to understand and use
Easier to locate and correct errors
Easier to modify
No worry about addresses
Easily relocatable
Efficiency of machine Language
10/28/2017

10. Limitations of Assembly Language
The following limitations of machine language are not solved by using assembly language
Machine dependent
Knowledge of hardware required
Machine level coding
10/28/2017

11. High-level Language
Machine and assembly languages are often referred to as low-level programming languages, because they are machine dependent, they require the programmers to have a good knowledge of the internal structure of the computer being used, and they deal with machine-level coding requiring one instruction to be written for each machine-level operation. High-level programming languages overcome these limitations of low-level programming languages.
10/28/2017

12. Compiler
A compiler is a translator program, which translates a high-level language program into its equivalent machine-language program
High-level language program Machine language program
compiler
Input
Output
10/28/2017

13. Linker
A linker is a software, which takes multiple object program files of a software, and fits them together to assemble them into the program’s final executable form, which is sometimes called a load module.
10/28/2017

14. Interpreter
An interpreter is a translator program, which translates a high-level language program into its equivalent machine language program.
However, unlike a compiler, which merely translators the entire source program into an object program and is not involved in its execution, an interpreter takes one statement of source program, translates it into machine language instructions, and then immediately executes the resulting machine language instructions, before taking the next statement for translation.
No object program of the source program is generated by the interpreter.
10/28/2017

15. Advantages and Limitation of High-level Languages
High-level languages enjoy the following advantages over assembly and machine languages:
Machine independence
Easier to learn and use
Fewer error
Lower program preparation cost
Better documentation
Easier to maintain
10/28/2017

16. Limitations of high-level Languages
The two limitations of high-level languages are as follows :
Lower efficiency
Less flexibility
10/28/2017

17. What was the first generation of programming languages?
Machine languages were the first languages available for programming computers
First-generation languages
A machine language provides a set of commands, represented as a series of 1s and 0s
10/28/2017

18. What is a second-generation languages?
An assembly language allows programmers to use abbreviated command words, called op codes, rather than 1s and 0s
Classified as a low-level language
Most often used to write system software
10/28/2017

19. What is a third generation languages?
Third-generation languages use easy-to-remember command words to take the place of several lines of assembly language or endless strings of machine language
COBOL
FORTRAN
Pascal C
BASIC
10/28/2017

20. What is a fourth generation languages?
Fourth-generation languages more closely resemble human languages
Eliminate many of the strict punctuation and grammar rules complicating third-generation languages
Typically used for database applications
SQL
RPG-I
10/28/2017

21. What about fifth-generation languages?
Some believe a fifth-generation language is a computer programming language based on a declarative programming paradigm
Other experts feel fifth-generation languages are those that allow programmers to use graphical or visual tools to construct programs
10/28/2017