1. DIGITAL MULTIMETER DMG600-610

2. DIGITAL MULTIMETER DMG600-610
NEW DMG MULTIMETER
TARGET
Great performances/cost ratio
Introduction of CX01 – CX02 (with app Sam1)
Competitive product against
Socomec Diris A20
Socomec Diris A17
Janitza UMG-96
Circutor NRG-96 e CVM-C5
Schneider PM200
Gavazzi EM26-96
DMG
CX02
CX01
M63 GB

3. DIGITAL MULTIMETER DMG600-610
MAIN CHARACTERISTICS
72x46mm backlighted LCD display with icons
Size 96x96x65mm
With or without EXP
DMG600: standard version
DMG610: version with built-in RS485
1 slot
Front optical port
M63 GB

4. DIGITAL MULTIMETER DMG600-610
DISPLAY (LCD WITH ICON)
Operating temperature -20…+60°C
Bar graph Percentage of a full scale value
Units
Subpage indication: instantaneous measures, maximum, minimum, average values, maximum demand
Measurement value
Measurement type (ex. V L3-L1)
Active energy counters always available in all the pages
Flashing icon for alarms
Scrolling text in case of alarms, messages for the user or parameter setup Texts available in 5 languages
M63 GB

5. DIGITAL MULTIMETER DMG600-610
OPTICAL PORT ON FRONT
Advantages
No need to disconnect the panel power supply to connect with the device.
Electrical safety (no physical connection).
IP54 protection degree
Comfortable access to the unit from the front.
M63 GB

6. DIGITAL MULTIMETER DMG600-610
OPTICAL PORT ON FRONT
CX01
PC link through USB (CX01) or WiFi (CX02) for:
Programming
CX01 (USB) for:
Firmware upgrade.
CX02 (WiFi) for:
Project upload/download
Controller cloning.
CX02
M63 GB

7. DIGITAL MULTIMETER DMG600-610
LINK TO APP SAM1
Link to SAM1 app:
to see on smartphones or tablets all the measures of the multimeter
to send commands, such as counters reset or enabling and disabling of multimeter outputs
to set the parameters, save a copy in a file and retrieve it in case of need (the file can be sent via as well)
to see the user alarms which are active.
M63 GB

8. DIGITAL MULTIMETER DMG600-610
COMPATIBILITY WITH SYNERGY SOFTWARE
M63 GB

9. DIGITAL MULTIMETER DMG600-610
EXPANDABILITY
1 EXP MODULE
EXP1000 (4 digital inputs)
EXP1001 (4 digital outputs)
EXP1002 (2 inputs + 2 static outputs)
EXP1003 (2 relay outputs)
EXP1008 (2 inputs + 2 relay ouputs)
EXP1010 (USB)
EXP1011 (RS232)
EXP1012 (RS485)
EXP1013 (Ethernet), with static or dynamic IP address support
M63 GB

10. DIGITAL MULTIMETER DMG600-610
CHARACTERISTICS
Auxiliary power supply: 100…440VAC - 120…250VDC
3-phase + N voltage input: 50…720VAC (600VAC rated)
3-phase current input: 25mA...6AAC, programmable CT 5A / 1 A,
Accuracy for voltage and current: 0.5%
Accuracy for energy: class 1 EN (active energy) - class 2 EN (reactive energy)
4-quadrant measurements
IP54 protection degree
Compatibility with Synergy supervision software
Compatibility with SAM1 app
M63 GB

11. DIGITAL MULTIMETER DMG600-610
MEASUREMENTS
3Ph + N voltages
3Ph + N currents (N current is calculated)
Active, reactive and apparent power (4 quadrants)
Power factor
Active, reactive and apparent energy (total and per phase)
Frequency
Total harmonic distortion (THD)
Hour counter
Asymmetry (voltage and current)
Phase active power unbalance
M63 GB

12. DIGITAL MULTIMETER DMG600-610
FUNCTION
Monitor relay function (with EXP1003)
4 limit thresholds on all the available measures
4 digital inputs (with EXP module) to:
generate alarms
execute commands (for example alarm reset)
syncronise the average calculation.
4 alarms
activated by digital inputs or limit thresholds overcoming
with possibility to make the display backlight flash for indication from a distance.
4 digital outputs (with EXP module) to:
indicate the limit threshold overcoming
signal the alarm conditions
generate pulse energy
to remotely operate through a software.
M63 GB

13. DIGITAL MULTIMETER DMG600-610
FUNCTIONS
Demand peak monitoring:
4 integration mode for active and reactive power:
fixed time
mobile window
synchronisation command by digital input
synchronisation command by serial message (modbus)
Possibility to set a limit threshold to disconnect non priority loads or to indicate the user to operate to reduce the power consumption.
Typically sent
by the Utility
M63 GB

14. DIGITAL MULTIMETER DMG600-610
SELLING POINTS
CX01 and CX02 support
Built-in RS485 serial port (DMG610)
Expandability with EXP… modules
Alarm notification through backlight flashing
Active power maximum demand management
Compatibility with SAM1 app
Compatibility with Synergy software.
M63 GB

15. DIGITAL MULTIMETER DMG600-610
COMPETITION
Lovato
DMG600
DMG700
Schneider
PM200
Socomec
Diris A20
Diris A17
Circutor
CVM-NRG-96
CVM-C5
Janitza
UMG 96-L
Housing
Dimensions
(terminals included)
96x96x65mm
96x96x60mm
96x96x50mm
72x72
96x96x63
96x96x42
Dimensions with modules
96x96x80mm
Not expandable -
Protection degree
IP54
IP65
n.a.
IP52
IP51
IP50
LCD type
icon
Graphic
128x80 pxls
Auxiliary supply
AC voltage
100…440VAC
100…415VAC
110…400VAC
200…277VAC
100…240VAC
220…240VC
DC voltage
120…250VDC
125…250VDC
120…350VDC
95…300VDC
Voltage/Current
Voltage range
50…720VAC
20…830VAC
10…576VAC
50…500VAC
Max 598VAC
86…442VAC
CT secondary
/5 or /1 /5
/5 (C5: also /1)
Current range
10mA…6A
…6A
Max 6A
20mA…6A
Temperature
Operating
-20…+60°C
0…+60°C
-10…+55°C
-20…+50°C
M63 GB

16. DIGITAL MULTIMETER DMG600-610
COMPETITION
Lovato
DMG600
DMG700
Schneider
PM200
Socomec
Diris A20
Diris A17
Circutor
CVM-NRG-96
CVM-C5
Janitza
UMG 96-L
Accuracy
Voltage
0.5%
0.2%
n.a. 2%
Current (with /5 CTs)
Active energy
Class 1
Class 0.5S
96: class 0.5S
C5: class 1
Class 2
Reactive energy
Other characteristics
4 quadrants measurements ● -
Hours counter
THD measurements
Option
Harmonic analisys
M63 GB

17. DIGITAL MULTIMETER DMG600-610
COMPETITION
Lovato
DMG600
DMG700
Schneider
PM200
Socomec
Diris A20
Diris A17
Circutor
CVM-NRG-96
(M51800)
Janitza
UMG 96-L
Expansion modules / options
Number of expansion module for a single multimeter 1 4 - 2
Digital inputs ●
C5 only
Digital inputs+outputs
Relay outputs
Static outputs
Option
Built-in
RS232 port
RS485 port
DMG610: built-in
USB port
Ethernet
M63 GB

18. DIGITAL MULTIMETER DMG600-610
Thank you for the attention!