Presentation is loading. Please wait.

Presentation is loading. Please wait.

Agenda MAP Technical Training Configure MAP 5000 system Area

Similar presentations


Presentation on theme: "Agenda MAP Technical Training Configure MAP 5000 system Area"— Presentation transcript:

1 Agenda MAP Technical Training Configure MAP 5000 system Area
Agenda Configure MAP 5000 system Area User Smartkey Features Overview Part 1 Part 2 Basics MAP 5000 system overview System communication Modules Cabling Enclosure concept Remote Programming Software (RPS) MAP – Bringing into service Configure BDB devices Configure inputs/outputs Control center Configure LSN devices Start up RPS Set up modules Operation Points/Outputs Area User Schedule/Event Smartkey Diagnostics Firmware Closing meeting Diagnostics Firmware Features Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

2 Overview MAP Technical Training Security Systems
Overview Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

3 Core facts MAP 5000 MAP Technical Training MAP 5000
A modular and flexible security system that can be adapted to various needs For XLarge, large and medium sized projects (e.g. banks, universities or airports) A high-security intrusion panel that continues to work even in case of failure due to fault-tolerant and redundant bus technology Local Security Network (LSN) developed by Bosch Security System It can integrate with BIS supervisor intrusion, access control and video Security Systems ST-IN/MKA | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

4 Different applications
MAP Technical Training Different applications + MAP BIS More than elements Airports, universities, high rise buildings, museums Size of the project XLarge Shopping malls, hospitals, storage rooms Large MAP 5000 (8 loops) Up to 1500 elements Office buildings banks, large stores – retail chains, research departments, schools Medium MAP 5000 (4 loops) Up to 512 elements - Security Systems ST-IN/MKA | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

5 Main components MAP Technical Training Main components of MAP 5000
Wide range of LSN peripherals MAP 5000 Control Panel Control Center LSN gateway Power supply Main enclosure Expansion enclosure Power enclosure Motion PIR/microwave Seismic detector Glass break detector Smoke detector Magnetic contact detector Hold up – panic button Expansion modules Display panels Power supplies Security Systems ST-IN/MKA | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

6 Remote programming and monitoring
MAP Technical Training Main components Up to addresses, 500 areas and users Covering Installation Removable colored screw terminals Colored marking and labeling of connectors Control Panel In- and outputs 8 supervised inputs 1 supervised tamper input 2 programmable outputs 2 programmable relay outputs 1 auxiliary output Remote programming and monitoring Easy thanks to integrated ethernet connection Security Systems ST-IN/MKA | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

7 Main components MAP Technical Training Language
Language adapted to the user according to the identification Display Intuitive icons with description in plain text Available content according to the user access rights Control Center In- and outputs Guard function like staying logged or log-in through a physical input Intuitive arm of the building since areas are linked thanks to parent- child structures with arming conditions Control Full control of users – change user code on next logging Security Systems ST-IN/MKA | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

8 Main components MAP Technical Training Structure 1 loop or 2 stubs
Installation Removable colored screw terminals Marking and labeling of connectors LSN gateway Electric consumption 1 Loop or 2 stubs Low electric consumption Up to 8 LSN modules can be installed supporting each 127 LSN elements 2 auxiliary power outputs (500mA) Output 2 auxiliary power outputs (500mA) Security Systems ST-IN/MKA | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

9 Main components MAP Technical Training Number
Up to 32 per security system Number Up to 32 per security system Power 2 independent power ports with fixed 28VDC regulated output 28V is used by emil input/output modules to provide local 12V at any distance from the bus Power 2 independent power ports with fixed 28VDC regulated output 28V is used by emil input/output modules to provide local 12V at any distance from the bus Power supply Features 150W for battery charging and system power 1 24VDC aux output (500mA) 2 dry relay contacts for AC and DC trouble 2 independent battery supervision (24VDC/80Ah) Installation Removable screw terminals Labeling of connectors Security Systems ST-IN/MKA | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

10 Three types of enclosures
MAP Technical Training Main components Three types of enclosures Hinged plate to access easily to the wiring Rail system easy to install and maintenance Battery capacity 2x42Ah to preserve operation in case of AC loss Pre-wired cable set Main enclosure Extension enclosure Power enclosure Security Systems ST-IN/MKA | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

11 Basics MAP Technical Training Security Systems
Basics Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

12 Modules MAP Technical Training Internal Bosch Data Bus Control Panel
Control Center External Bosch Data Bus Power Supply DE module LSN gateway LSN loop Signaling devices Relais modules Printing function Batteries 12V Converter Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

13 Peripheral devices MAP Technical Training LSN devices Panel enclosure
EM55 LSN (Field Bus) Conventional devices via LSN coupler Conventional devices External Bosch Data Bus EMIL120 Expansion enclosure Security Systems ST-IN/MKA | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

14 Connector colors MAP Technical Training
AC and Battery Input terminals on the PSU Auxiliary power on the main panel, PSU and the LSN gateway LSN loop on the LSN gateway Input points (including tamper) on the main panel and PSU Output points (relay, EOL supervised and power) on panel, DE module and PSU Bosch Data Bus (CAN bus) connection DR2020 printer port on DE module Security Systems St-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

15 Bosch Data Bus (BDB) cabling
MAP Technical Training Bosch Data Bus (BDB) cabling BDB cabling (Internal and external Bus) Last element RE = 120 Ohm 2x2x0,8 Cable cross-section of wires depends on estimated current (Voltage NOT <12 Volt) Security Systems St-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

16 Bosch Local Security Network (LSN)
MAP Technical Training Bosch Local Security Network (LSN) Sensor actor fieldbus (master-slave principle) One network for intrusion and fire Wide range of more than 70 LSN device types from 6 manufacturers Interfaces for conventional detectors, inputs and outputs Central programming of all device configurations Extremely robust and provides fault tolerance Short circuit isolators in each device can withstand a short or open at any point in the loop and ALL devices still function Meets EN grade 3 and VdS class C approval Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

17 Bosch Local Security Network (LSN) wiring
MAP Technical Training Bosch Local Security Network (LSN) wiring AUX- AUX+ LSN (a- , b+) LSN Gateway Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

18 Bosch Local Security Network (LSN)
MAP Technical Training Bosch Local Security Network (LSN) Automatic address assignment 8 9 10 11 7 6 12 13 5 Initialize LSN loop (Assign addresses) 14 4 15 3 16 2 17 1 18 19 LSN Gateway Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

19 Smartkey system MAP Technical Training Blocking element LSN
Magnet contact Arm and disarm areas Additional features Smartkey interface module (SE320) (SE60) Door opener Bolt contact Smartkey reader Key fob – ID card Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

20 Smartkey system interface modules
MAP Technical Training Smartkey system interface modules Control unit SE 60 LSNi SE 120 LSNi SE 220 LSNi SE 320 LSNi VdS class c C Vds No. G G G G SPE blocking element x Conventional bolt contact Conventional magnetic contact Input unit Code keypad with integrated reader Code keypad and reader (in combination) Reader and lockable code keypad Code keypad (as autonomous code keypad) Blocking element for vault door or door opener relays Freely programmable switch output IUI-SKCUOL-60 IUI-SKCU1L-120 IUI-SKCU2L-220 IUI-SKCU3L-320 Connection options for system components Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

21 Remote Programming Software (RPS)
MAP Technical Training Remote Programming Software (RPS) Tool for configuration, diagnostics and firmware upgrade Graphic user interface, individually adjustable Communication via ethernet (IP) Wizzards simplify complex actions Many actions can be done intuitively per drag and drop Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

22 Start up RPS for MAP MAP Technical Training Security Systems
Start up RPS for MAP Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

23 MAP 5000 System Bundle MAP Technical Training
Remote Programming Software Firmware files Control Panel and modules RPS for MAP Update LSN gateway Control Panel Control Center Crystal reports Visual C++ NET framework SQL Server 2005 Express Microsoft SAP AG Bosch Manufacturers Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

24 RPS connects to MAP 5000 panel
MAP Technical Training RPS connects to MAP 5000 panel Prerequisites Ethernet (IP) connection must be given Assign IP address, fixed or dynamic to Ethernet adapter Administrator privileges are helpful RPS for MAP Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

25 RPS installation and start application
MAP Technical Training RPS installation and start application default Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

26 Select operator language
MAP Technical Training Select operator language „Menu Ansicht – Sprachen“ Select language Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

27 Administration operators
MAP Technical Training Administration operators Menu administration – operators Modify operator admin Set language e.g. American English RPS language changes when finished and persists for next time Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

28 Screen MAP Technical Training Menu Toolbox Explorer Properties Manager
(Diagnostics) Manager (Actions) Lists Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

29 Save configuration MAP Technical Training Menu home
Prior to panel connection click on save-button to save your configuration Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

30 Connect to Control Panel
MAP Technical Training Connect to Control Panel Menu home Click on connect-button Select via direct connect Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

31 Disconnect from Control Panel
MAP Technical Training Disconnect from Control Panel No Reboot Panel does not reboot after disconnect Reboot / Persist Panel reboots and keeps states of areas and points: armed areas would be armed after reboot disabled points would be disabled after reboot Reboot / No Persist Panel reboots all areas disarmed and all points enabled Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

32 Set up modules MAP Technical Training Security Systems
Set up modules Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

33 Hardware manager MAP Technical Training Security Systems
ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

34 Bosch Data Bus devices identification
MAP Technical Training Bosch Data Bus devices identification Assign area Some system devices have parameter panel wide device Assign product ID Product ID represents unique address of each module of a Bosch Data Bus ( BDB) Example Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

35 Control Panel identification
MAP Technical Training Control Panel identification This value does not modify the IP-address of the Control Panel Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

36 Control Panel interfaces
MAP Technical Training Control Panel interfaces Rear side Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

37 Control Panel behavior
MAP Technical Training Control Panel behavior Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

38 Control Panel RPS and BIS
MAP Technical Training Control Panel RPS and BIS ! Do not modify any passcode here Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

39 Control Panel miscellenious
MAP Technical Training Control Panel miscellenious Value indicates number of addresses used in the system Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

40 EN Grade 3 Compliance MAP Technical Training
Check for VdS/EN Grade 3 compliance Select default property values set = EN Grade 3 Restore all properties using ‘EN Grade 3’ default property values set (Right mouse click) Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

41 Control Center behavior
MAP Technical Training Control Center behavior Local area indicates delay times for exit and entry delay Default language is valid, when no user login Scope of indications may consider all alarms and troubles or be limited to areas in scope of this Control Center only Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

42 Control Center timing and holdup
MAP Technical Training Timing Display OFF Idle timeout Exit delay Holdup Behavior Suppress Duress and Holdup Alarms Suppress Indications if user not active on the keypad User Passcode Tamper Control Center timing and holdup Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

43 Double click on item leads to the source of the error
MAP Technical Training Panel Validation RPS for MAP performs panel validation before sending configuration to Control Panel Look at error list for errors Critical – prevent sending Warning Duplicate names VdS/EN Grade 3 compliance Double click on item leads to the source of the error Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

44 Operation MAP Technical Training Security Systems
Operation Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

45 Installer mode MAP Technical Training To get installer mode
Press installer button 3 s LED is blinking slow All Control Centers are inactive, except Installer Control Center Only users from type installer may login Alarms are not reported (default setting) Control Panel Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

46 Hardware reset MAP Technical Training
Press Installer Button 6s to reset the Control Panel LED condition Module condition OFF No function Blinking fast Initializing Blinking slow Data transfer Steady Normal Control Panel Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

47 Failsafe Mode MAP Technical Training Force to Failsafe Mode
Power OFF (remove AC and DC) Open tamper of Control Panel Power ON, keep installer button pressed (30s) System starts in failsafe mode (endures some min) When system is in Failsafe Mode No application is running RPS connect and firmware upgrade of Control Panel is possible Firmware and configuration must be sent again by RPS Control Panel Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

48 Control Center user login
MAP Technical Training Control Center user login Press installer button for 3s Login as User 004 4#969594 or User-ID Passcode User-ID Passcode Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

49 Control Center definitions
MAP Technical Training Control Center definitions Control Center menu Action Elements affected Properties User STATUS Bypass – unbypass Points, bypassable Action for users in order to arm area though there are tripped points Users SERVICE Enable – disable All devices Action for installer users to enable or disable devices Installers Activate – deactivate (by keyswitch) Control Centers Option for control centers must activate with key switch before usage Keyswitch user Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

50 Points and outputs MAP Technical Training Security Systems
Points and outputs Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

51 Point basics MAP Technical Training Point devices (LSN)
Interface module points Creation point at Control Panel Onboard I/O Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

52 Point properties MAP Technical Training Assign area Select point type
More options Exit delay option Entry delay option Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

53 Output basics MAP Technical Training Select output type
Output properties (behavior item list – edit button) Add one or more behavior items Add one or more behavior items (wizzard leads through configuration) Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

54 Output behavior MAP Technical Training One or more behavior items
AND/OR logic Max/min time for each event Idle state definition (low/high) for each event and for output Activation delay time for output Priority when using OR logic Event Priority 1 Min. time Logic OR/ AND 2 Event Activation Delay Time Idle statelow/high Idle state low/high 3 Event Min. time Event 4 Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

55 Output properties MAP Technical Training More properties
Logic level low/high Detect output activation (change state in event history) Turn ON logic OR/AND Turn OFF only when activation timer expires Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

56 LSN device detection MAP Technical Training Connect
Select LSN gateway device Click on refresh button Click on “Get available diagnostic functions” Click on “Start auto detection” System starts procedure to detect all LSN devices attached to the selected gateway Confirm result of auto detection Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

57 Area MAP Technical Training Security Systems
ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

58 Area basics MAP Technical Training Assign to an area
Smartkey devices (mandatory) BDB devices LSN devices Inputs Outputs Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

59 Area properties MAP Technical Training Force arming with alarm
Automatic arming Area relationships Timing and delays Blocking time for disarming Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

60 Area releationships master area
MAP Technical Training Area releationships master area Area 1 Control Panel Area Area 2 Area 3 Area 4 Area 5 Area 6 1 1 1 Child areas Area 1 Area 2 Area 3 Area 4 Area 5 2 1 1 Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

61 Area relationships master area child option
MAP Technical Training Area relationships master area child option Area 1 Control Panel Area Area 2 Area 3 Area 4 Area 5 Area 6 Child areas Area 1 Area 2 Area 3 Area 4 Area 5 Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

62 Area relationships shared area
MAP Technical Training Area relationships shared area Area 1 Control Panel Area Area 2 Area 3 Area 4 Area 5 Area 6 Child areas Area 1 Area 2 Area 3 Area 4 Area 5 Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

63 User MAP Technical Training Security Systems
ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

64 User basics MAP Technical Training Control Center Smartkey User
Access Profile Area & Time Model Smartkey Profile Permission Set Time Model Area Special Days Day Model Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

65 User creation MAP Technical Training Add users Select user type
Select access profile Assign pin Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

66 User properties MAP Technical Training Change users properties
Activation date Active/inactive Force passcode change on next login Assign language Change login ID Use standard or extended delay time for arming/disarming areas Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

67 Schedule and event MAP Technical Training Security Systems
ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

68 Schedule actions MAP Technical Training
Actions can be performed by schedule Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

69 Schedule creation MAP Technical Training
Use wizzard to create and configure schedules Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

70 Logging, printing and reporting
MAP Technical Training Logging, printing and reporting Panel event groups Configure properties for logging, printing and reporting Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

71 Reporting on parallel interface
MAP Technical Training Reporting on parallel interface Parameters for reporting on parallel interface of DE Module Relay module Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

72 Smartkey MAP Technical Training Security Systems
ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

73 Smartkey device MAP Technical Training
Assign smartkey device to an area More options Use of bolt contact Require passcode for arming/disarming Alarm overide Force unlock Use of door opener (SE320 only) Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

74 Smartkey profile MAP Technical Training Add smartkey profile
Assign one or more area(s) Smartkey profile properties Arm authority Disarm authority Time model used for disarming Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

75 Smartkey user MAP Technical Training Add smartkey user
Select user to use smartkey Smartkey user properties Assign smartkey profile Select smartkey access type Assign smartkey tag number Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

76 Firmware update MAP Technical Training Security Systems
ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

77 Modules MAP Technical Training Connect
Click on SW update/device firmware Select device Select update file RPS sends file to the Control Panel System will reboot Wait until system finished update Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

78 Control panel MAP Technical Training Connect
Click on SW update/Control Panel firmware Select update file RPS sends file to the Control Panel System will reboot Wait until system finished update Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

79 Features MAP Technical Training Security Systems
ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

80 Custom point types MAP Technical Training
Create custom point type, based on a standard type Modify arming dependent responses Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

81 Blocking time for disarming
MAP Technical Training Blocking time for disarming Configuration of allowed times for disarming for all areas and CPA Three blocking time intervals per day During configured intervals disarming is allowed Outside configured intervals disarming is NOT allowed During installer mode unlocking time is inactive for all areas Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

82 Keyswitch MAP Technical Training Keyswitch performing actions
Arm/disarm area Login on Control Center Activate/deactivate Control Center Motion detector test Reset Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

83 Virtual devices basics
MAP Technical Training Virtual devices basics Virtual devices do not exist on map hardware Virtual devices are designed to perform logic operations Virtual devices are configurable similar to corresponding hardware types Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

84 Virtual devices behavior
MAP Technical Training Virtual devices behavior Virtual output Virtual point Event OR/ AND No Hard-ware Event Event Event Virtual output Virtual keyswitch Event OR/ AND Operation Event Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

85 Virtual devices scenarios
MAP Technical Training Virtual devices scenarios Vitual outputs Vitual points Event Point Event OR/ AND Event output Event 1 OR/ AND Event Event Event Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

86 Diagnostics MAP Technical Training Security Systems
ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

87 Control Center MAP Technical Training Status View area status
View device status Service View version information Walk test Motion detector test Bell test Change/view output state Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

88 RPS for MAP MAP Technical Training Select device View diagnostics
Optional Click refresh button Perform actions Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

89 Questions? BI@ST MAP Technical Training Christoph Thomas ST/ICO42
Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

90 Firewall setting for windows 7
MAP Technical Training Firewall setting for windows 7 Windows 7 Firewall blocks DHCP data That’s why RPS for MAP cannot use direct connection Now RPS for MAP should be part of the list of allowed programs Procedure Open Control Panel / Windows Firewall, Click item “Allow a program or feature through Windows Firewall“, Click “Change settings“, click “Allow another program“ Click “Browse“. Select RPS for MAP, the path may be: C:\Users\xxxxxx\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\BOSCH Click “Add“ and select all network options Confirm with “ok”. Security Systems ST-IN/MKS | February 2015 | © Robert Bosch GmbH All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.


Download ppt "Agenda MAP Technical Training Configure MAP 5000 system Area"

Similar presentations


Ads by Google