Presentation is loading. Please wait.

Presentation is loading. Please wait.

Warm Welcome Matrix SETU VTEP Single Span VoIP to T1/E1 PRI Gateway.

Similar presentations


Presentation on theme: "Warm Welcome Matrix SETU VTEP Single Span VoIP to T1/E1 PRI Gateway."— Presentation transcript:

1 Warm Welcome Matrix SETU VTEP Single Span VoIP to T1/E1 PRI Gateway

2 Introduction VoIP to T1/E1 PRI Gateway Dedicated VoIP-ISDN PRI Gateway
Plug-n-Play device VoIP access device for an existing PBX PRI trunking for an IP-PBX

3 SETU VTEP - At a Glance Network Interfaces SETU VTEP Sync In Sync Out
Network Clock Synchronization ISDN - PRI ISDN TE/NT WAN Port USB Port DC Power Jack Network Interfaces

4 VoIP Connectivity Network Connectivity ISDN PRI Connectivity
32 VoIP Channels 32 SIP Accounts VoIP Proxy Calls (SIP Accounts) Peer-to-Peer Calls (500 Entries) ISDN PRI Connectivity 1 ISDN PRI Software Configurable T1 and E1 PRI Programmable TE/NT

5 Target Customers END USERS BUSINESS VERTICALS Corporate Offices
Factories and Ware Houses Banks IT and Technology Companies Logistics Companies Government Institutions Hotels Call Centers Organizations with Remote Offices System Integrators Internet Telephony Service Providers Internet Service Providers Confidential

6 APPLICATIONS Confidential

7 Existing Infrastructure
VoIP Access Device for Existing PBX T1/E1 PRI Existing Infrastructure ISDN PBX ISDN Terminals VoIP Access SETU VTEP VoIP access for legacy phone systems with T1/E1 PRI interface Programmable TE/NT modes , so no configuration changes in the PBX Retain existing PBX infrastructure and terminals ISDN terminals can place calls directly over WAN network Compatible with all legacy ISDN PBX

8 T1/E1 PRI Gateway for an IP-PBX
IP- Phones IP-PBX IP based System ISDN PRI SETU VTEP VoIP ISDN PRI trunking for IP based system Deployable in all SIP based VoIP networks Provide connectivity to traditional and wide spread ISDN PRI network

9 Peer-to-peer Calling VoIP without involving SIP proxy server
500 Direct dial access codes Dynamic DNS support ; no need of static IP address Enables SOHO and SMEs to interconnect multiple sites without significant investment of telephony infrastructure at all sites

10 Virtual Trunking Accessibility
Local PSTN Trunk Accessibility Call Placed over VoIP network

11 Virtual Trunking Accessibility
Connect multiple branch offices over cost-effective IP network Virtually access trunk connectivity of remote location Avoid heavy inter-network call charges SETU VTEP can be registered to central IP-PBX Leverage central IP-PBX resources and features remotely via SETU VTEP

12 DDI Routing over IP Extends ISDN DDI service over IP from one location to other Receive DDI calls directly on remote branch extensions Route a callback over ISDN trunk–either from local branch or remote branch

13 KEY DIFFERENTIATORS Confidential

14 Compact Footprint Compact and dedicated VoIP-ISDN PRI Gateway
Out-n-Out Gateway 32 VoIP Channels 1 ISDN PRI T1/E1 Channel Various mounting options Wall-Mount Table-Top 19” Rack Mount ISDN PRI VoIP SETU VTEP

15 Network Clock Synchronization
Dedicated Sync-In and Sync-Out port Common clock source shared between PBX and SETU VTEP No interoperability issues No clock slips ~ no dropped calls: Superior voice quality ISDN PBX ISDN PRI Sync In Sync Out Master Clock SETU VTEP TE NT Extns

16 Click Next to Configure Step-wise
Administrative and Configuration Ease Fast and easy installation No high level expertise required Web–based remote management Intuitive user interface Quick access wizard for easy configuration Click Next to Configure Step-wise

17 Localization Multiple language support
English French German Italian Portuguese Spanish Call Progress Tones and Detection Country wise Call Progress Tones and Rings Customize Tones as per Requirement Country- Specific Date -Time Format , ISDN PRI Variants and CLIP variants Day Light Saving Time

18 Key Benefits Substantial communication cost reduction
Extended existing PBX capacity and capability High on SOHO and SME wish list Early Return on Investment No need to replace legacy communication infrastructure Cost-effective migration to IP telephony with lower CAPEX Fast and Easy Installation Multi-site and Multi-branch connectivity for growing organizations Enhanced administrative and configuration ease

19 Key Features

20 Allowed and Denied List
Allow or deny specific numbers from being dialed Avoid misuse and restrict unproductive calls Separate Lists for VoIP and ISDN PRI ports Automatic Number translation Automatically translates the number to match with numbering plan of the destination network User can dial without worrying about the network through which the call will be routed Supported on VoIP and ISDN PRI ports

21 Direct Dial-in Routing
Call Detail Record Monitor and Keep Record of Incoming and Outgoing Calls Filters like Call Duration, Calling Number, Type of Port etc. helps in Call Analysis Store details of 2000 calls Back-up options in csv and text format Direct Dial-in Routing Route Incoming Calls on SIP and ISDN PRI trunks to specific extension Extend DDI Routing capability over IP among Remote locations Avoid Operator Intervention A boon for PBX without DDI functionality

22 Digest Authentication
Used to authenticate an incoming caller on SIP port Restrict calls between a group of users Automated authentication mechanism.; no need to manually enter passwords each time before placing calls Ensure secured communication Enhanced Voice Quality Toll quality voice with all industry standard codecs support G.711 A-Law,µ-Law, G.723, G.729AB, GSM-FR codecs to ensure superior voice quality

23 Return Call to Original Caller
Fax over IP Send and receive real-time fax using cost-effective IP network T.38 Fax and Pass-Through No need of dedicated analog lines Return Call to Original Caller Equipment intelligence stores details of called number along with extension number, in case the called number is busy or unanswered On call back from the called number, SETU VTEP automatically routes call to the same extension from where the call was attempted – No more lost business opportunities SETU VTEP supports RCOC in both – VoIP and T1/E1 PRI Trunks

24 TR-069 Auto-Configuration
TR-069 is a Secure Remote Management Protocol It is used for Auto-configuration and Remote management of the device at customer premises from an Auto-Configuration Server It supports a variety of functionalities: Dynamic Service Provisioning Firmware Management Status and Performance Monitoring Remote Diagnostics

25 Feature List Access Codes Allowed and Denied Numbers
Auto Provisioning for Mass Deployments Automatic Number Translation Call Detail Records (CDR) Call Progress Tone and Rings Daylight Saving Mode Digest Authentication Emergency Number Dialing Fax over IP Least Cost Routing TR-069 Auto-Configuration NAT and STUN Support PCAP Trace Peer-to-Peer Calling Return Call to Original Caller SNMP Monitoring TLS and SRTP Support VLAN Tagging Web based Management

26 Matrix GATEWAY PRODUCT RANGE
SETU VGFX Multi-port SIP based VoIP to GSM-FXO and FXS Gateway SETU VGB Multi-port SIP based VoIP to ISDN BRI Gateway SETU VFXTH Medium Density Multi-port SIP based VoIP to FXO-FXS Gateway SETU VFX Low Density Multi-port SIP based VoIP to FXO-FXS Gateway SIMADO GFX Multi-port GSM to FXS Gateway SIMADO GBR Multi-port GSM to BRI Gateway

27 27

28 Type of Presentation: Product Presentation Number of Slides: 28
Revised On: 1st Dec 2014 Version-Release Number: V2R1 For Further Information Please Contact: ID: Visit us at 28


Download ppt "Warm Welcome Matrix SETU VTEP Single Span VoIP to T1/E1 PRI Gateway."

Similar presentations


Ads by Google