1. Josren Ventures Company (JVC) Limited, Takoradi Workshop

2. Site location

3. Site layout Phase 1, 2015 workshop machines equipment growing line
blasting
painting
office facilities
Phase 2, 2016
assembly workshop
high tolerance fabrication
prefabrication tanks, pipelines and vessels
Phase 3, 2016/2017
zinc coating
heat treatment

4. Workshop, General View

5. Plate Roller, Faccin HAV 3165
Variable geometry with three moveable rolls
Linear Slides for roll movement (RGS)
Induction hardened and surface polished rolls
Electronic Balance System (EPS)
Special Breaking System for pre-bending
Cone bending attachment
Control console moveable on wheels
Centralized Lube system (pump)
Siemens Numerical Control Unit
Safety Guard cable around machine
Side and to plate supports
Support boom for 6 m radius
Machine CE certified for safety

6. Profile Roller Faccin RMCI 110
Universal rolls for rolling all standard sections
Motorized fine adjustment for universal roll height
Independent adjustment of the bending rolls (double pinch)
External guide rolls independently adjustable in six directions
Simultaneous translating and rotating movements for bending rolls
Infinitely variable rotation speed for interpolation between different radii
Automatic hydraulic compensation of rolls rotational speed
Three independently driven shafts with torque expander
Three hydraulic motors and three planetary gearboxes for rolls rotation
Special high resistance heat treated forged steel used for rolls
Roll shafts made of NiCrMo alloy steel hardened and ground
High load over-dimensioned bearings
Machine CE certified for its safety

7. Plasma Cutting Machine, Esab Phoenix PXE 4500

8. Band Saw, Bomar DGH
Program controlled 60° two-sided double bevel
Fully automatic double-bevel band saw machines with a bevel range of 60° on both sides. Individually configurable feed lengths to 6,000 mm and graphical, dialog-based operator prompts offer a wide range of applications.
Continuous two-sided bevel cuts to 60°
Material tension always under 90° to the contact axis, even with bevel cuts
Integrated material rollers up to the saw machine's support tables
Large, precise V-guide block for the adjustable saw band guide arm
Powered shavings brushes always synchronized to the saw band speed
Large, easily visible bevel scale readable right from the pivoting console
Vice with full-lift cylinder and special adjustable guide on hardened, ground rails

9. Lathe, Pro Takang TK 840x3000
Conventional Lathe for high speed operation
Capacity
Swing over bed mm
Swing over cross slide mm
Swing over gap mm
Centre height mm
Gap width from spindle nose 460 mm
Between centres 2000 mm, 3000 mm, 4000 mm, 5000 mm
Bed width mm/460 mm
Weight cap between centres 2800 kg

10. Milling machine, Accutec 2500 M
Standard Features
Rapid traverse on "X", "Y" & "Z" axis.
Via inverter variable feeding on "X", "Y" & "Z" axis.
High quality meehanite casting body GC-45/DIN-40.
All gears & shafts are hardened & ground.
Table swivels ±45° degrees left & right.
All "X", "Y" & "Z" wider square slide ways & table surface are hardened & ground.
Motorized ARM/RAM elec. Motor is 3.75KW (5.5HP)
Horizontal spindle elec. Motor is 5.5KW (7.5HP)
All square slide way & dovetail way are bigger & stronger.
Cast iron is either ASTM No. 40/meehanite GC-45 or DIN GG-40

11. Drilling machine, Opti B50 GSM
Heavy gear drilling machine with coolant system and threading mechanism as well as automatic spindle sleeve feed
Heavy solid cast iron construction
Very smooth running due to ground oil-quenched gear wheels
High true running accuracy due to hardened and ground work spindle
Two-stage driving motor
Automatic toothed wheel lubrication via oil pump
Threading unit
Lockable main switch and motor protection switch
Machine luminaire integrated in the drill head

12. Press brake, Vakomet KR1000
Strong structure with hydraulic adjustment of pressing power
Standard supplies:
V-pieces
Height adjustment of table
Groove for fastening of work pieces
Punch
Hydraulic piping
Power gauging
Technical data
Pressing Power: 1000 kN
Stroke length: 300 mm
Pressing speed: 6 mm/s
Motor power: 5,5 kW
Oil tank: 40 l
Weight: kg

13. Welding machines MIG/MAG welding machines, 21 pcs SAW Tractor, 5 pcs
Welding towers which will be part of growing line for assembly of e.g. Anchor Suction Piles

14. First project, fabrication of Foundation Module Supports for FPSO
Fabrication on-going
Fabrication of 122 pcs of Foundation Module Supports for OCTP, FPSO project
Total weight 250 ton
Supports ready for transportation
Supports arrived in Singapore

15. Next project starting up, OCTP FPSO 6 pcs of Anchor Suction Piles
Growing line assembly
Top can
Padeye plate, 75 mm thickness
Plate rolling

16. Contact Information
Mr. Joseph Quashie, CEO phone: Mr. Tom Främling phone:

17. RANDOM WORKSHOP PICTURES

18. Workshop, General View

19. Machines and Equipment

23. THANK YOU