2. Sure Torque develops and produces closure torque testers since 1984
Sure Torque develops and produces closure torque testers since 1984., and provides the widest range of Torque Testing solutions

3. ST-LAB – full automatic torque testers
Main features:
Operator-independent testing
Programmable Topload control
Customer configurable parameter setup for 10 different sample types
SD card, Serial, Ethernet communication
Quick overchange between different samples - no tool !
STATISTIC function (Average, deviation, cpk, etc)
All the sample fixings and movements are automatic, with 100% repeatable speed and forces

4. ST-LAB basic test modes
Release test
Torque application
Release-reapplication test (no seal break, sample can be put back on the line!)
Application than release test
Undestructive release test (passed-failed test)
Warranty ring application test
Warranty ring bridge breaking test
Strip test
Application overtorque test

5. Release-Application demo video
Sure Torque server
Youtube

6. ST-LAB advanced test modes
Application Angle Tests – Measuring the application angle while removing the closure. End of removal can be detected by:
Pull – lifting the closure when thread ends pass
Push – the thread ends’ jump-over when over- rotating the closure by 360o after the thread ends’ pass
Results:
Initial release torque
Application angle
Bridge torque

7. Application Angle test demo video
Sure Torque server
Youtube

8. ST-LAB advanced test modes
Topload Seek Test – Increases Topload stepwise until the closure is ratchetting. Results: Maximum release torque and final topload

9. Topload Seek Test demo video
Sure Torque server
Youtube

10. Main advantages of the ST-LAB
Operator-independent testing
Saving on the test samples that can be put back in the production by using the release-reapplication or undestructive release tests – machine can save it’s cost in 1 year!
Automatic Application Angle testing
Special tests that may not be performed on manual torque testers (CR-Topload)
Automatic result saving + print/export
Included CALIBRATION KIT!

11. Statistics, History, Tool Change demo
Sure Torque server
Youtube

12. ST-H serie - universal handheld torque/force meter line
One handheld unit that can be equipped with different test heads for different QC and maintanance measurements

13. ST-H serie
ST-H-C chuck calibrators - For application torque measurement, directly on the capper head. ST-H-T topload unit - For direct topload spring force measurement on the machine ST-H-D desktop unit - For cap release torque measurement in the QC Possibility of adding Custom Torque or Force measuring units as:

14. ST-H serie
CFM Crimp Force Measuring unit Measures maximum and remaining crimp force 30 and 100 kg capatity Minimum diameter: 16mm The following film shows the aplication of the chuck calibrator (video was made with older machine – sorry about it )

15. Chuck Calibration with ST-H4
(old version) demo
Sure Torque server
Youtube

16. ST-M manual desktop torque tester line

17. The smartest manual torque tester with features as:
- graph displaying and storing
- warranty ring bridge torque measurement
- quicklock sample fixing
- communication: SD card, print, data export

18. ST-C3 desktop torque tester
Probably the smallest desktop cap torque
testers on the market
The ST-C3 has almost
the same features as
the ST-M2, but in the
smallest size

19. Smart Load Cell line
Wireless Bluetooth test systems for Torque, Force or Combined torque- force testing
Display unit can be any
smartphone or tablet

20. SmartLoadCell – TRQ1
Universal hand held torque tester with changeable fitments for testing:
Closure release torque
Capper machine’s chuck torque ON THE MACHINE

21. SmartLoadCell – TPL1 Universal Top Load tester
Chuck top load testing on capper machines
Expands 10 mm
Capacity: 30 kg

22. SmartLoadCell – TRQ2
Desktop torque tester with changeable fitments for testing:
Closure release torque
Warranty ring torque, etc

23. SmartLoadCell – TRQF
Hand held torque-force tester with changeable fitments for testing:
Torque and Top Load on Child Resistant closures

24. Smart Bottle – Torque-Force
Testing dynamic Torque and Top Load on running capper machines
Changeable fitments for different neck / container shapes and sizes
Same application as for all other SmartLoadCells

25. Smart Bottle – Force Testing dynamic Top Load on running
Crown cork
ROPP
capper machines
Capacity: 400 kg
Changeable fitments for different neck / container shapes and sizes

26. Torque Etalon Bottle
We provide calibration kits for all our Torque Testers. But for the quick verification we also
provide the ST-TEB Torque
Etalon Bottle with different
torques.

27. For any further details please contact us: