1. VSSC CollabCAD Testing Report - Evaluation of Issues
8th & 9th September 2010

2. 5. SPLIT_PLANE_LONGERON.muz
VSSC Test Parts
1.      AFT_END_RING.muz
2.      BULK_HEAD.muz
3.      CONNECTING_PLATE.muz
4.      FORE_END_RING.muz
5.      SPLIT_PLANE_LONGERON.muz
8th & 9th September 2010

3. TEST REPORT PARTS : 1
DETAIL
AFT END RING
    
8th & 9th September 2010

4. PROCEDURE FOR AFT END RING
1.Draw sketch.
Y axis
3.New workspace for side holes(cylindrical slab)
4.Making cylindrical slab for side holes
5.Array copy ---> cylindrical for cylindrical slab
6.Taking difference of parent & array copy cylindrical slab
7.Making cylindrical slab for bottom holes
8.Array copy ---> cylindrical for cylindrical slab
9.Taking difference of parent & array copy cylindrical slab.
8th & 9th September 2010

5. TEST REPORT PARTS : 2
DETAIL
FORE END RING
8th & 9th September 2010

6. PROCEDURE FOR FORE END RING
1.Draw sketch.
Y axis
3.New workspace for upper side holes(cylindrical slab)
4.Making cylindrical slab for upper side holes
5.Array copy ---> cylindrical for cylindrical slab
6.Taking difference of parent & array copy cylindrical slab
7.New workspace for lower side holes(cylindrical slab)
8.Making cylindrical slab for lower side holes
9.Array copy ---> cylindrical for cylindrical slab
10.Taking difference of parent & array copy cylindrical slab
11.Making cylindrical slab for top holes
12.Array copy ---> cylindrical for cylindrical slab
13.Taking difference of parent & array copy cylindrical slab.
8th & 9th September 2010

7. TEST REPORT ISSUES # Observation NIC Comment 1.1.0
Not possible to Offset lines with fillets (curves). Only line entites supported in chain selection
1.Individually line / arc chain
selectable.
2.RSE : For chain selection.
(PTR 2323,2319)
1.2.1
Solid revolution about local / global axis
.Resolved V 1.9.3
1.2.2
Entities not visible in grid.
Resolved V 1.9.3
8th & 9th September 2010

8. TEST REPORT ISSUES # Observation NIC Comment 1.3.1
Model axis not available
1.Axis is not visible currently but
face is selectable to apply the axial constraint.
2.RSE (Axis of cone/cylinder/revolution selection to be implemented.) Need to create Axis Entity
3.PTR 2165 / 1881
8th & 9th September 2010

9. TEST REPORT ISSUES # Observation NIC Comment
1.3.2
Surface not highlighted in shaded view.
1.Visibility due to opaque color of
surface.
2.User can change color setting
from Tools ---> Options ---> Part
change transparency
3.For individual solid
Select solid
click right mouse button
Select modify
Select tab General
Change Transparency
8th & 9th September 2010

10. TEST REPORT ISSUES # Observation NIC Comment 1.3.3
Workspace parallel to XY plane in solid revolution, model is not visible.
PTR 2265 (Critical)
1.4.1
&
1.4.3
Circular patterning
Total angle + angular spacing
1.Total angle by default 360
2.Angular spacing available.
3.RSE : Tree structure
Reference solid should come under Pattern as a child node
4.RSE : Delete original reference
Solid option to be provided.
8th & 9th September 2010

11. TEST REPORT ISSUES # Observation NIC Comment 1.4.2
Clockwise / Anticlockwise direction for circular pattern
1.Available
1.4.4
Patterning on Inclined faces
Making holes on inclined faces
Test part required
Instead above
Edit ---> Array Copy
---> Cylindrical option used.
1.Working Fine.
8th & 9th September 2010

12. TEST REPORT ISSUES # Observation NIC Comment
1.4.5
i. FBSM ( Feature Based Solid
Modeling ) for hole.
Hole is not selectable for pattern
ii. Boolean Difference to be used
for hole creation.
1.FBSM is not selectable for pattern as per basic modeling philosophy.
2.User has to pattern cylinder
created on required location
and check the box available
in pattern dialog“Group All
copies“ so that user can do
boolean difference at a time.
1.5.1
Grids Disappear Suddenly when try to capture image.
Working fine during
File ---> Capture Image.
8th & 9th September 2010

13. 1.5.1: Capture image with Grid points
CollabCAD Window
Captured Image
8th & 9th September 2010

14. TEST REPORT ISSUES # Observation NIC Comment 1.5.2 Documentation
Documentation reg base point,center point and head point
Resolved V1.9.3
1.5.3
Projection of edges, faces, vertices on current Work Plane
IC2120 (GMA)
1.It is available while creating
profile on current Work plane.
8th & 9th September 2010

15. 1.5.3: Projection on current work plane
PREVIOUS SKETCH
AT DEPTH “0”
NEW PROFILE
AT DEPTH “100”
8th & 9th September 2010

16. TEST REPORT ISSUES # Observation NIC Comment 1.5.4
Face Extraction not available
1.Available.
Surface-Explore-Selected Face.
2.If anything further required
Please give details.
8th & 9th September 2010

17. TEST REPORT ISSUES # Observation NIC Comment IC2263
1.5.5
Measurement Tools
a. Point to surface
b. surface to surface
c. radial parameters.
Feature parameter like depth, diameter etc.
IC2263
Available under Tools ---> Analysis.
1.RSE surface to surface.
2.RSE:Measure items for curve ,
edge, length, depth , radius.
3.Available for other issues like
Point to surface, edges.
4.If anything further required
please give details.
8th & 9th September 2010

18. TEST REPORT ISSUES # Observation NIC Comment 1.Not an issue.
1.5.6
Runtime Exception during Dynamics
1.Not an issue.
2.Check console for error if able to
duplicate.
1.5.7
Fit in feature in shaded mode with all basic entities
1.Fixed in 1.9.2
2.IC2267
1.5.8
After making 105 holes, last operation for next 29 holes took long
1.Which operation was used?
2.What about the 105 holes?
8th & 9th September 2010

19. TEST REPORT PARTS : 2
DETAIL
BULK HEAD
8th & 9th September 2010

20. PROCEDURE FOR BULK HEAD
1.Draw sketch.
Y axis
3.New workspace for holes
4.Making cylinder for upper holes
4.Array copy ---> cylindrical for cylinder
5.Taking difference of parent & array copy cylinders
6.Making cylinder for lower holes
7.Array copy ---> cylindrical for cylinder
8.Taking difference of parent & array copy cylinders
9.Making cylinder for holes (4 nos X 2 times)
10.Taking difference of parent & cylinders
8th & 9th September 2010

21. TEST REPORT ISSUES # Observation NIC Comment 2.1.1 Surface Extrusion
a. Linear extrusion direction not normal to Work plane
Test part is required from TEST REPORT to duplicate.
1.PTR IC2336 ( Chenthil )
2.Test part required.
b.Bidirectional extrusion not possible
8th & 9th September 2010

22. TEST REPORT ISSUES # Observation NIC Comment 2.1.1
Linear extrusion : default extrusion is not normal to current work plane
B. Biderctional extrusion
Surface extrusion multiple entities
1.RSE
a.Extrusion of profile to get
- Free form surface
- N no. of surface
b.Solid trimming with free form
surface.
8th & 9th September 2010

23. TEST REPORT ISSUES Observation # NIC Comment 2.1.2 Plane Cut
Surface has to be created for defining split plane.
RSE: Solid trimming issue and Test part is required from TEST REPORT to duplicate.
2.2.1
Systems Performance very poor.
1.Need to be supported with
examples / parts , exact steps.
8th & 9th September 2010

24. TEST REPORT ISSUES Observation #
NIC Comment
2.2.2
Hide elements are converted into Unhide elements vice versa if all curves selected from tree.
This implementation as per design. For blanking / unblanking, enough options are available to user like individual selection and selection at tree level using shift + Arrow and CTRL key too.
8th & 9th September 2010

25. TEST REPORT ISSUES Observation # NIC Comment 2.2.3 Boolean Operation
For making holes gives Null pointer exception
Not able to duplicate.
1.Is it same as 1.4.4?
2.Please indicate operation
3.Test part required.
8th & 9th September 2010

26. TEST REPORT ISSUES # Observation NIC Comment 2.2.4
Entity Selection via Tree
Regarding selection of “n” no. of cylinders to cut from parent.
Selection from canvas and tree are two separate operations
Selection from tree is for edit This operation is not for modeling. It is allowed for certain operations like blanking/ unblanking , making analysis,modify,translate,delete and delete constraints.
While array copy select the checkbox for group all entities so that while boolean cut all entities are selected at a time.
8th & 9th September 2010

27. TEST REPORT ISSUES # Observation NIC Comment 2.2.5
Circular pattern Crash
Pattern not allowed for curved surface (Refer 1.4.4). IF crashing, check will be added
RSE: Cylindrical Pattern
8th & 9th September 2010

28. TEST REPORT PARTS : 3
DETAIL
CONNECTING PLATE
8th & 9th September 2010

29. PROCEDURE FOR CONNECTING PLATE
1.Draw sketch.
2.Slab along -ve Z axis
3.Making slab for side holes(cylindrical slab)
4.Array copy ---> rectangular for cylindrical slab
5.Taking difference of parent & array copy cylindrical slab
6.Making slab for bottom holes(cylindrical slab)
7.Array copy ---> rectangular for cylindrical slab
8.Taking difference of parent & array copy cylindrical slab
8th & 9th September 2010

30. TEST REPORT ISSUES # Observation NIC Comment 3.1.1 Boolean Union
Solid plates should become one solid and should not show intermediate lines.
HLR & HLR with Back edges option available to user.
2.Part required.
3.1.2
Curved edge selection crash during solid blend
1.Part required.
3.1.3
Solid Blend crash
8th & 9th September 2010

31. TEST REPORT ISSUES # Observation NIC Comment 3.2.1
Solid Pattern (Rectangular)
a.Use of Global Axis reg direction
1.Assumed
Left to right + ve X
Bottom to top + ve Y
b.pattern on curve/inclined face
1.Currently pattern supports planar faces only.
Alternate exists.
2 Part required. .
8th & 9th September 2010

32. TEST REPORT ISSUES # Observation NIC Comment 3.2.1
c.Delta row & Column value
User can calculate delta row & column with respect to model size of particular view(Length x Breadth x Height).
.RSE : Color coding to be
implemented for row / column
indication.
d.Local Coordinate system for patterning.
LCS of selected face
Test part required
8th & 9th September 2010

33. TEST REPORT ISSUES # Observation NIC Comment
3.2.2
Boolean Cut
one hole having extra surface.
1.Appears to be reference solid. Will provide User option to retain/remove reference solid.
3.3.1
Coordinate System
& workview same highlights LCS & GCS but if workview changed LCS is not visible.
1.In user defined workspace both the GCS & LCS are available.
2.In the standard view this is not
provided as it is felt that it is
not required.
8th & 9th September 2010

34. TEST REPORT ISSUES # Observation NIC Comment 3.3.2 Translate operation
Not available w.r.t. LCS
Available V1.9.3 ( Was available in development version since June 14th)
3.3.3
Dynamics can not be applied if input dialog active.
This implementation as per design.
3.3.4
Refresh tree
Provided V1.9.3
8th & 9th September 2010

35. TEST REPORT PARTS : 5 DETAIL SPLIT PLANE LONGERON
8th & 9th September 2010

36. PROCEDURE FOR SPLIT PLANE LONGERON
1.Draw sketch.
2.Slab along -ve Z axis
3.Making cylinder for side holes (4 nos.)
4.Array copy ---> rectangular for cylinders (4 nos. X 2 times)
5.Taking difference of parent & array copy cylinders (8 nos.)
6.Making cylinder for side upper holes
7.Array copy ---> rectangular for cylinders.
8.Taking difference of parent & array copy cylindrical slab
9.Making cylinder for side lower holes
10.Array copy ---> rectangular for cylinders.
11.Taking difference of parent & array copy cylindrical slab
12.Making cylinder for top holes
13.Array copy ---> rectangular for cylinders.
14.Taking difference of parent & array copy cylindrical slab
15.Drawing lines at an angle 26 & 33
16.Making surface by using lines.
17.Trim solid by using surfaces
8th & 9th September 2010

37. TEST REPORT ISSUES # Observation NIC Comment 4.1.1 Offset workplane
1.By changing origin create
workspace.
(Define workspace – New origin)
2. creation of profile at depth is also possible. V 1.9.3
4.1.2
Selection of origin at reqd depth
Origin could be selected using RMB- Enter coordinates at reqd depth.
1.Refer 4.1.1
8th & 9th September 2010

38. TEST REPORT ISSUES # Observation NIC Comment 4.1.3
Creation of 2D Profile
Available
4.1.4
2D Fillet
Filleting & trimming can not be done together.
1.Trim of fillet is available in 1 step.
2.Remaining lines can be deleted.
3.The combined option can be provided to
user.
8th & 9th September 2010

39. TEST REPORT ISSUES Observation # NIC Comment 4.1.5
Offset Surface as Workspace
Resolved V1.9.3
4.1.6
Extract surface can not be used further
Which operation?
4.1.7
Dynamics-rotate failure
Test part required.
8th & 9th September 2010

40. TEST REPORT ISSUES # Observation NIC Comment 4.1.8
Solid Trim : surface missing
Test part required. Such cases can also be supplemented with images
4.1.9
Zoom In or Shift K : surface appearing as open surface.
Test part required.
4.2.0
Hole Creation on solid faces
a.Solid pattern reference face
Issue (For non planer)
(Refer & 1.4.4)
b.Array Copy – rectangular
w.r.t. LCS not available
Resolved V1.9.3
8th & 9th September 2010

41. ASSEMBLY
8th & 9th September 2010

42. TEST REPORT ISSUES # Observation NIC Comment 1 Random Color issue
1.Ongoing work (MPR) 2
Edit-Rotate in Assembly module when 2 same parts available and rotate any one of them, both disappears.
Not able to duplicate.
Test part required. 3
Changing view
software hanged.
Increase system resource for
heavy parts. 4
Restarted the session
8th & 9th September 2010

43. Assembly:90 degree rotation of one of the two same entities
Inserting same component two times
After rotating one of them by 90 degree
8th & 9th September 2010

44. TEST REPORT ISSUES # Observation NIC Comment 5
a.last used directory to be set
while opening file
This happens on new CollabCAD session.For same session last used directory is used.
b.Number of components loaded
Into assembly & performance
issue
c.Assembly Reopen error
Either part was corrupted or
user had relocated the part.
d.warning message on canvas
Test part required.
IGCAR 50 components inserted without problem
8th & 9th September 2010

45. DRAFTING (PLOT CONFIGURATOR)
8th & 9th September 2010

46. TEST REPORT ISSUES
8th & 9th September 2010

47. TEST REPORT ISSUES
8th & 9th September 2010

48. TEST REPORT ISSUES
8th & 9th September 2010

49. TEST REPORT ISSUES
8th & 9th September 2010

50. GENERAL OBSERVATION
8th & 9th September 2010

51. TEST REPORT ISSUES
8th & 9th September 2010

52. TEST REPORT ISSUES
8th & 9th September 2010

53. TEST REPORT ISSUES
8th & 9th September 2010

54. TEST REPORT ISSUES
8th & 9th September 2010

55. TEST REPORT ISSUES
8th & 9th September 2010