1. My Internship at Saudi Aramco Company
Department of Mechanical Engineering
Period [16/06/ /08/2012]
Submitted by: Abdullah Yousef Al Rajeh
Dr. Omar Ouda

2. Outline Introduction About Saudi Aramco
Activities and responsibilities
The Heat Exchanger
The Centrifugal Pump
Steam turbine
Conclusion

3. Introduction
I am an employee in the company with 10 years of experience.
My internship involves a rotation assignment that starts with work for the maintenance group in Abqaiq plant, then, for the Test and Inspection unit, after that, to work in maintenance shop in AL Qurryah.
I gain in each place a unique experience and skills.

4. About Saudi Aramco Aramco (Arabian American Oil Company) began in 1930
After 5 years of exploration, oil was discovered in Dhahran area “Dammam Well # 7”
A world leader in exploration, production, refining, distribution, shipping and marketing
the world’s largest proven crude oil reserves of billion barrels
the world’s fourth-largest gas reserves, with 279 trillion cubic feet.

7. Activities and responsibilities
Week
Work Performed
Supervisor's Signature and Comment 1
Safety Orientation
 Done 2
Take heat exchanger out and send it to service company to check it
 In progress

8. SAFETY ORIENTATION
All personnel, new hires, contractors and visitors must read the following safety information and understand their responsibility to demonstrate safe working habits in all job assignments.
EMERGENCY PROCEDURES: (Exits and escape plans, Fire extinguishers …)
PHYSICAL DEMANDS: (Lifting, carrying, and bending, Protection from falls, Sitting or standing for long periods …)
ELECTRICAL SAFETY
OFFICE HAZARDS

9. The Heat Exchanger

11. Supervisor's Signature and Comment
Week
Work Performed
Supervisor's Signature and Comment 3
Received heat exchanger and test it then return it to its tube channel
 Done 4
Take impeller out of the Centrifugal pump case and seal
In progress 

12. The Centrifugal Pump

14. Supervisor's Signature and Comment
Week
Work Performed
Supervisor's Signature and Comment 5
Change the seal and make new pen then return it to its case
Done  6
take turbine out of the case then send it to maintenance shop
In progress 7
Change the blades and test it 8
Return the turbine to its case

15. Steam turbine

18. Conclusion New knowledge or skill as a result of this internship:
Improve my communicating skills.
Implement the theoretical part into practical.
Have a better knowledge regarding Aramco standers.
The period needs to be extended. But overall it is very successful and helpful for the graduate students.

19. Questions