Download presentation
Presentation is loading. Please wait.
Published byCameron Hall Modified over 7 years ago
1
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Waves often travel in packets and have a well-defined envelope. The phase velocity is the velocity at which the wave crests travel. The group velocity is the velocity at which the envelope travels.
2
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: The base flows in this tutorial are all planar jets/wakes with top hat velocity profiles. These flows have analytical dispersion relations, which can be calculated without numerical methods.
3
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Left: The imaginary and real components of ω(k) calculated with a temporal stability analysis, in which k is constrained to be real. Right: The imaginary components of ω(k) for the five dispersion relations.
4
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: The impulse response for varicose perturbations of an unconfined low density jet with Λ = 1/1.1, S = 0.1, and finite thickness shear layers. The impulse is at (x,z) = (0,0) and the resultant waves disperse at their individual group velocities in the x- and z-directions. The chart plots the growth rate, ωi, of the wave that dominates along each ray (x/t,z/t), i.e., the wave that has group velocity (x/t,z/t). We see that most of the wavepacket propagates and grows downstream (to the right) but that some waves propagate and grow upstream (to the left). The growth rate at the point of impulse (x/t,z/t) = (0,0) is positive, which means that this is an absolutely unstable flow [33].
5
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Contours of ωi(k) for varicose perturbations of a confined jet flow with surface tension, showing the integration path from k = −∞ to k = +∞. The integration path passes over saddle points s1 and s3, which means that they contribute to the integral. It does not pass over saddle points s2a or s2b, however, which means that they do not contribute to the integral. This is another way to visualize the Briggs–Bers criterion, which states that a saddle point is only valid if it is pinched between a k+ and a k− hill [33].
6
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Contours of ωi(k) for the same flow as Fig. 8, as the surface tension is reduced. This reduction in Σ causes the s1 saddle to move to lower ωi and, therefore, causes the integration path to pass over the s2a saddle point. When the surface tension tends to zero (not shown here) all the s2 saddle points move onto the integration path [33].
7
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Eigenvalue spectrum for PPF at Re = 104, α = 1, β = 0. Solution of LNS (•) and the Orr–Sommerfeld (◻) equations. Notice that the vorticity modes are not represented by Orr–Sommerfeld equation. Results produced by run_LNS.m and run_OS.m.
8
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Velocity and pressure perturbations corresponding to the most unstable eigenvalue of PPF at Re = 104, α = 1, β = 0. Data produced by run_LNS.m for the most unstable mode in Fig. 10. All components are normalized with max(|û|).
9
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Subharmonic secondary growth rate σ as a function of the spanwise wave number β for F = ωr /Re = 1.24 × 10−4 at Branch II, Re = 606 [43]. The parameter A indicates the amplitude of the primary disturbance as a percentage of the maximum value of the streamwise basic flow velocity component.
10
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Neutral stability curves based on the maximum of û and v∧. The nonlocal results are compared to the DNS calculations (Berlin et al. [69]) and experimental data (Klingmann et al. [70]).
11
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Effect of streamwise step size on the growth rates of 2D waves in a Blasius boundary layer flow, F = 1.0 × 10−4. Computed by pse.m with stab = false.
12
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Effect of stabilizing term on the growth rates of 2D waves in a Blasius boundary layer flow, F = 1.0 × 10−4. Computed by pse.m with stab = true.
13
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Relative size of the discretized operators describing modal stability, when the same number of collocation nodes is used in one (local, PSE) and two (global, PSE-3D) resolved spatial directions (from de Tullio et al. [83]).
14
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Relative error in the computation of the leading eigenmode in PPF at Re = 104, α = 1, using spectral collocation (circle symbol), a suite of common high-order finite-difference methods, and the recently proposed FD-q finite-difference method [84].
15
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: Sparsity patterns of the laplace operator (left) incompressible BiGlobal EVP (middle) and compressible BiGlobal EVP (right), discretized using the spectral collocation method
16
Date of download: 9/27/2017 Copyright © ASME. All rights reserved. From: Modal Stability TheoryLecture notes from the FLOW-NORDITA Summer School on Advanced Instability Methods for Complex Flows, Stockholm, Sweden, 2013 Appl. Mech. Rev. 2014;66(2): doi: / Figure Legend: The Arnoldi algorithm (from Ref. [27])
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.